SkyrimUpscaler ENB Test Build 10

Hey bro! Nice work .-) Just signed up for downloading a DLSS for Skyrim. but. I am a real nood with computers... Which one should I download? And, where is the link to download it? Cannot find it anywhere... Thanks for taking the time ;-)

Rodrigo Perez

If you have a 4070Ti, just use the FG Build, you can double that fps.

PureDark

WoW. Finally above 60 FPS at Brotherhood sanctuary entrance. I gained 10-15 fps more, bringing from ~53-54 to 66-67 in this area. Upscaled from 1080p to 1440p with ~700 mods everything ultra, ENB ultra, Lods Ultra, Grass lods, whatever - ultra with 4070 TI. I was getting sick seeing 45 FPS at the entrance of Dark Brotherhood Sanctuary, but DLAA was actually getting my FPS down, this one is a nice mod, making ENB work with DLSS. Thank you sir. Keep up the good work.

suspicious_kitten92

I've noticed, rather strangely, that this mod + the current RTGI shader seems to... not produce much actual additional lighting/shadow? I hopped into the debug mode and there's far less shadow/light being presented in the lighting debug view of PG's RTGI shader than shown here in the examples. I'm... struggling to figure out if it's a PGRTGI issue, or this mod, or something else. That being said, the DLSS feature works fantastically, literally near-doubled my framerate.

William Thrash

It is recommanded but not required since the mod will turn off TAA automatically. But you do need to turn off EdgeAA and SMAA in ENB. Only some ENB presets come with SMAA in the post pass shader though.

PureDark

Make sure you've changed the .ini file to what type of upscaling your GPU allows for (FSR2 for AMD, etc.)

trash heap

Thanks for the reply - it doesn't seem to be an old save issue for me, since I haven't actually played the game properly since installing the upscaler. This is something I've noticed during the hundreds of occasions I've coc'ed from the main menu to random places to test things while building up my modlist. I don't know whether it might make a difference if I started an actual game without using the console. Sounds like it's not something that can be eliminated in any case so no worries, just thought I'd check in case there was a fix I missed!

Fibi

It's the game's own issue, those objects produce wrong motion vectors until you move them, it's only happening with your old save, cuz it saves where those objects are and place them when you load into the save, I think a new save could reduce the chance it happens but still, it's not really worth it.

PureDark

Do we not have to turn off TAA for this build?

Sun

Hi there, thanks for this! Great mod. The only mild drawback I've noticed is that while using it, I get kind of a spazzy, shakey visual effect going on with a lot of clutter objects like buckets, baskets, food, plates, etc. Sort of like when the physics are glitching out, except the objects don't move. It goes away if I physically move the object with the grab key or by walking into it. Just wanted to ask if this is a known/accepted side effect and if there's anything I can do about it?

Fibi

You are a champ! Had the same issue and it worked!

Jean Carreras

u need to delete upscale folder in overwrite

Kymani Williams

This isn't working at all. I've installed in mo2 and I crash everytime I start up the game. I'm using Solas Enb and I have followed instructions...

Joaquin De Paula

Any recommended settings for 3070ti and 1440p? It might be just me but I'm not seeing much of a difference. Should I be using DLSS 3.1.11 or an older version?

RudyGunslinger

Thanks for the quick response. Source must be elsewhere, let me check.

Ramesh Laxmisan

What lag issue? DLSS2 does't have any lag issue, it can only happen with frame generation.

PureDark

Hi Puredark, I have an nVidia 3080. what is the best version of the skyrim upscaler for my PC? I am currently running v10 and I am having some lag issues

Ramesh Laxmisan

I tried hundreds of stuff, and found that i just had to update detection meter from v0.16 to v0.17! If it helps anyone here ! Keep up the good work @PureDark <3

Sofiane Staili

There could be other issues, but comment section isn't really the best place to do troubleshooting, just ask in the discord server.

PureDark

I checked in BethINI, windowed & borderless, and in skyrimprefs bFullScreen = 0, i maybe missing other one to check?

Sofiane Staili

You need to make sure the game is not in fullscreen

PureDark

Hello i followed each steps but i get a black screen with the menu sound, i only have Immersive & Pure Pack installed (but it is supposed to not have any ENB in it)

Sofiane Staili

use autoactions to make the process automatic upon skyrim.exe detection https://github.com/Codectory/AutoActions

PureDark

If you don't mind could you tell me that Program? I can find about only resize not automate. Sorry to bother you

009

Noo, You don't have to sorry. I was just curious Thanks :)

009

There's tool to automate that process. And I am sorry that this wasn't meant for DSR usage but rather upscale to the monitor resolution for gaining FPS.

PureDark

Great work !! But, It isn't work for a REAL upscale I have QHD Monitor and want to display 4K But cause of requirement (borderlessupscale=false) It isn't fit with my monitor, It goes over the screen So, I had to use DSR(Nvidia Dynamic Super Resoultion) for a fit Should I have to do this everytime I launch the game? It makes me dizzy Is it made for just framerates?

009

Thank you very much... let's see how badly I can botch this up today... :)

Bruce

DOF in the ENB menu, under ShaderParameters. EdgeAA is in enblocal.ini. You don't have to change the resolution, upscaler handles that automatically, you only need to change settings to your liking in the included SkyrimUpscaler.ini, there's comments in it that explains the options. Press END in-game to open the menu, if you don't have END because you are on laptop, just change the keycode in the ini.

PureDark

Sorry to sound like a newbie on this (because I am) but I waited to download the ENB test build until some of the kinks were worked out. Where do I change the DOF and Edge EE? I have the rest adjusted from the instructions. And then what do I do? Run the game at a lower resolution but upscale to my current (or higher?). How do you get the menu for this to popup to make these changes? Just remembered you have the non-ENB version of Nexus so I'll check there for answers as well... EDIT: OK, I did find Mern's video tutorial that told me where to change those questions above, but that sounded like a lot of it was geared towards the non-ENB version. Do we need the BaseUpscalerPlugin with this version? I'm assuming everything else will be the same? I guess there are a few more options in the ini settings. With a 2080ti, I9-10980XE, 256GB RAM and a very large load order (1800+) what mQualityLevel should I be looking at to select?

Bruce

Yeah I tried tweaking all the transparencies and blurriness options in the ENB still no rain drops. I can only see the impact of rain in the ground.

Hansley Elwinn Go

Thanks for the timely reply and thank you for the amazing mod

Leek

Yes.

PureDark

Hi is this okay to use with the Nvidia Reflex mod?

Leek

If you just slide the DOF slider all the way to the left, it won't break the underwater.

PureDark

Maybe asked before, but what should we do if we're using water for enb and the visibility underwater depends on depth of field?

Luca Barbieri Sosa

Unfortunately my rain is at max opacity and lowest transparency 😔 I'll try to tweak it further

Hansley Elwinn Go

You need to increase the opacity of rain drops in ENB menu.

PureDark

For some reason my rain drops are gone from ENB Tested between this and my last use of Upscaler for ENB Test Build 07 hotfix which has the rain drops

Hansley Elwinn Go

Do you use ReShade? If so try unchecking the render before upscaling option. If not try playing on a new MO2 profile, see if it's the same in vanilla.

PureDark

i get sudden freezes on loading screens within 3 minutes of gameplay on average

Cyb3rBetrayal

FPS indoor cells: 120-144. Outside: 60-80. Mostly 2-4k parallax textures, rudy enb, nolvus reshade, 3060ti. Thank you, this is nuts. Edit: Quality Level: Balanced.

KillmongerSwe

turns out i hadn't updated drivers for my 3080 in like... 7 months

Xgatt

Sounds good, will do

Xgatt

You may wanna post the SkyrimUpscaler.log, but best way to get support is to link your discord on patreon and ask in the server.

PureDark

I'm having a consistent crash on startup, and I'm certain I've followed the instructions here. Any idea what's happening? https://pastebin.com/4nZpdKy1

Xgatt

I resolved it by disabling skyrim display tweaks, even though I made the necessary ini file changes.

Aaron Fernandez

Did you follow all the instruction and disable EdgeAA in ENB?

PureDark

I've been getting pixelation on my whole screen when using DLSS

Aaron Fernandez

Use external tools to take screenshots, such as GeForce Experience or just Steam.

PureDark

Is there anyway to take real screenshots with this plugin? right now all the screenshots are pixilated?

Valstorm Warsong

I would suggest linking your discord to patreon and join the server. And freezing means you didn't switch from fullscreen to borderless.

PureDark

Is there a comprehensive guide on how to install this? I tried to use it with my mod list and Rudy ENB and I could not get it to work. I would get to the main menu and it would freeze.

Thomas Betts

Excited to try the new build

Abdullah

You can only change the quality level in the included ini config file then restart the game.

PureDark

How do I change the image quality settings? It's on Ultra and the arrow button is grayed out when I try to click on it. Thanks for the hard work btw. Community appreciates it!

TXplitcitxTNx

Appreciation the explanation. I like to know how things work

Mat wilson

RTGI has no much connection with DLSS. If you have used RTGI before you would know that RTGI rely on fake motion vectors to work(not entirely but will work better with it), and it's using the MotionEstimation shader which use optical flow to guess the motion vectors. I simply exposed the real motion vectors generated by the game engine for RTGI to use.

PureDark

Yes.

PureDark

Also, motion vectors with RTGI. Is this so that the RTGI effect from reshade can piggy back off the progress from your dlss implementation. In other words, so rtgi can seem more integrated because that work has already been done with dlss?

Mat wilson

Does this mean you are now looking into frame generation for skyrim?

Mat wilson

I've posted a few comparisons on the discord, you can check it out.

CptTombstone

I don't really know, cuz FSR2 has always been worse for me in games with official implementations, maybe it's just how it works.

PureDark

Hi PureDark, can you provide any tips on eliminating ghosting with FSR 2? I'm not too sure what to do with the fov slider as nothing I change seems to have any effect.

Quiet Gaming

Link your discord to patreon and then you'll automatically join the server, then you can ask in the server. Or you can post the SkyrimUpscaler.log via DM, search for it in Documents.

PureDark

อรุณสวัสดิ์ ครับ

I have kind of got it working in Elden Ring(see my last post), it shouldn't be too hard but it's tedious.

PureDark

UltraQuality means larger render resolution therefore less fps, it's for those who has extra GPU power and want better image quality but can't afford the cost of DLAA. About ReShade recompiling yeah it's with the new feature ReShade added in 5.8.0, I might think of a way to bypass it in the future, untill then you can avoid it by unchecking render ReShade before upscaling.

PureDark

installing this version is giving me overall 10-20 fps drop with DLSS mode Ultra #4 kept same settings from previous version, reshade starts to recompile shaders everytime i enter an area such as towns,caves etc

The Lost

How are the FPS rates with this installed?

Richard Costa

Awesome work, much appreciated! Are you working on Frame Generation for Skyrim at the moment? If so, how difficult is it?

CptTombstone

Yayyy!!!

Logovore