![1960s Electric Chainsaw [Restoration]](https://xaiju.com/storager//e2/11/e211914c6c998ee85fa87dd5f2a56e462645faa51b4dc3831531543c89b1e1cb.jpg)
1960s Electric Chainsaw [Restoration]
Added 2018-06-12 18:47:11 +0000 UTCI started this in April...
Comments
Great video! Also, just got your sticker in the mail, thanks!
2018-06-22 02:21:35 +0000 UTCReally looking forward to part 2 of this one.
2018-06-14 17:12:07 +0000 UTCI check the video when I can't remember.
Hand Tool Rescue
2018-06-14 02:26:20 +0000 UTCDo you always know where everything goes back or do you make notes / go back and watch the recording?
Sebastian Gorgon
2018-06-14 02:16:24 +0000 UTCIt actually is now!
Hand Tool Rescue
2018-06-13 23:54:32 +0000 UTCThank you!
Hand Tool Rescue
2018-06-13 23:54:17 +0000 UTCHaha, no need this time.
Hand Tool Rescue
2018-06-13 23:54:08 +0000 UTCDem wrenches, so product placement :)
Vladimir Baciu
2018-06-13 16:36:18 +0000 UTCOne of your best videos so far! Thank you
2018-06-13 06:29:14 +0000 UTCI was hoping for some ultrasonic parts washer action on those brush holders! But still a big thumbs up!
2018-06-13 04:36:14 +0000 UTCTIG would be glorious! Maybe in the new shop.
Hand Tool Rescue
2018-06-13 03:39:44 +0000 UTCThis choice will define you as a man.
Hand Tool Rescue
2018-06-13 03:38:29 +0000 UTC26 amps!!! I mean I guess as long as you had a 30-40 amp breaker to take up the start load and volt drop from a 100ft extension cord... As for welding the holes up, get your self some thick chunks of copper, Even 1/16" of copper 1/8" larger diameter than the hole would have helped, ideal would be at least 1/4" or better and 1/2" bigger diameter. It looks like it buckled because you had to put too much metal in the hole fighting with the fluxcore... Also, get your self some 75/25 Ar/Co2 and hardwire! Or A TIG! Like if you get a TIG welder I would take vacation time and teach you to TIG damn near anything you came across...
Clifton Ballad
2018-06-13 03:28:26 +0000 UTCShould wait till tomorrow to watch this for my wranccch to arrive. but that seems like a long time from now.
2018-06-13 03:24:34 +0000 UTCGlad the stickers are finally arriving!
Hand Tool Rescue
2018-06-12 23:41:30 +0000 UTCInteresting!
Hand Tool Rescue
2018-06-12 23:41:06 +0000 UTCI don't know how so much oil got into the motor...
Hand Tool Rescue
2018-06-12 23:40:58 +0000 UTCNeat bit of work on the oil can! One trick I saw in a video of a guy pulling a dent out of a saxophone was a big ball bearing on one side and a rare earth magnet on the other; useful maybe?
2018-06-12 22:51:36 +0000 UTCWhere did all that gunk come from. Did something think they had to oil the brushes or something? Perhaps that's all from chain oil? I may have missed it, but I didn't see a chain oiler.
Al Hunt
2018-06-12 19:42:13 +0000 UTCIt's a cool feeling to open my mail, and there's a new HTR video. Not a big deal, but in this world every little bit helps, no? Thanks bro (I know you're not really my bro, but you know what I mean) Thanks for the sticker.
Wilmer Schock
2018-06-12 19:35:25 +0000 UTC
