Aveen3D

Hu tao update 🎃

Hello, everyone!

We're almost done with the Hu Tao figure! 🎃
This time, it will come with two head options, so you can choose the one you like more. We still have a few details left to fine-tune and polish, such as the hair, the ghosts, and the clothes, but we're almost finished!

I hope you all like it as much as we do and as soon as we finish the figurine, we'll open up polls for the following figure!

Thanks for your support 😊

Hu tao 🎃

Hi guys! This is an initial work in progress of the Hutao figure. We've been contemplating the pose you can see in the image.

Although we are still working on the pose, we would like to know what you think about the pose!

October Poll Round two!

The first poll round has ended, and Genshin Impact has won! We'll try to alternate themes so that Genshin won't be an option next month!

The poll will conclude on October 5th; on the same day, we'll be sent the Mika Misono figure! 

Mika Misono

Hello guys! Mika Misono's figurine is almost finished. Just a few final touches left! While we finish up, we're going to open the polls for the next figure.

But this time, we'll be conducting the poll in two parts.
In the first poll, we'll decide on the anime/game.
In the second poll, based on the winner of the first poll, we'll select some characters from that anime or game.

The voting will last for 2 days for each of them! So, we hope to start with the new figurine by t...

Mika Misono WIP #1

Hi guys,

The concept for Mika Misono's figurine is nearly complete. I'm about to start finalizing the details.

I can't wait to share the final result with you all, and I hope you like it!

Best regards!

Ironmouse WIP #2

Hello everyone!

The Ironmouse figure will be finished in a couple of days! 🎉 So no need to worry, each of the past month's Patreons will receive it via DM.

This is the general idea of the figure, but the pose and base are still to be done.

We will hold this month's poll right away once this figure is ready to enter the printing process. 🌸

The options will be chosen from our Discord suggestions so make sure to join us and let us know what you want! 🙏

S...

NEXT FIGURE CHOSEN: Ironmouse

Hello everyone!

We can finally announce this month's figure! Ta-da~ 🎊

The winner of the poll is VTuber VShojo's Ironmouse!😈

This is the outfit chosen as the reference and a little WIP.

We are still working on the pose and base, so nothing is definitive yet, if you have any suggestions or ideas feel free to let us know how you imagine this figure in the comments or discord! 🤗

See you~

MARCH FIGURE POLL

Hello everyone! 

The poll is up, we've chosen some of the recommendations you all gave on our discord~

If you wanna make recommendations make sure to link your discord to Patreon and join our community!

#polls

FEBRUARY FIGURE - DONE! [Alice - NIKKE]

Hello everyone!

Last month's figure is finally done, and with this, we bear some good news.

Yes! You read that right, we, as I'm the new helper writing this right now! 🌸

Nice to meet you all, I'm Aru and I'll be in charge of the social media side of this project. This means from now on you all can expect more regularity on both informative posts and figure-delivering schedules! 

Now on other news, for all of you who joined us this past month as you know, the pa...

Houshou and Alice almost finished

Hi guys,

Thank you so much for your patience.

Houshou Marine is almost finished and it will be released on February 5 for all the last month's Patreon. I can make some changes to the base if anyone has any suggestions :)

Alice will be released a bit later, at least during the week of February 6. The Tpose is almost finished but I still have to do her hair, pose her and make some
improvements!

I will post the posed version this week!

Thank you so much e...

Happy new Year! + Update

Hi,

Happy new year guys! I wish you a wonderful year!

I'm sorry for not finishing the figure the last month. As you probably noticed, I stopped the billing so you didn't get invoiced for the previous month.  Honestly, many things happened to me recently that don't let me work on Patreon. Hopefully, this won't happen again since this is my livelihood.

Here is a Realistic Bakugou Figure as a gift to all of you who have stayed subscribed to my Patreon.

2023-01-08 17:59:45 +0000 UTC View Post

Houshou marine WIP #1

Hi Guys!!

I will finish the Houshou marine chibi very soon. I'm still working on the figure, but I want to share my progress so far 😊

Alice's still in progress I want to show you another WIP very soon!

Thanks for your support!

Alice Wip#1

Hi guys, I want to share with you an early WIP.

There is still a lot to do. Currently, I'm testing the figure pose with a base prototype. Alice's figure will include a Sniper weapon on her back, also I have to finish all her clothes and hair too.

In the upcoming days, I will also post the Houshou Marine Chibi WIP. I will try to finish the Chibi first so I can send the chibi first.

Chibi Hololive November + December

-Inugami Korone https://virtualyoutuber.fandom.com/wiki/Inugami_Korone

-Houshou Marine https://virtualyoutuber.fandom.com/wiki/Houshou_Marine

-Usada Pekora https://virtualyoutuber.fandom.com/wiki/Usada_Peko...

November + December Figure

Hi guys!

First of all, the next release will be 2 months long too. I will stop billing this month so you won't be charged twice for the next release.

Nikke Goddess of Victory won the poll. And the Alice character was the most commented on the post.

I will also do an extra chibi character. I will let you decide which one. I will open a poll right now.
Chibi Hololive figure suggestions:

-Inugami Korone 2022-11-18 13:08:16 +0000 UTC View Post

Keqing Done

Hi guys,

Keqing it's done and I'm doing a test printing, I will send the rewards tomorrow to all October + September Patreons through private message.

The poll will end tomorrow, and I will start working on the next figure. If I don't get enough time to finish this month I will stop the billing for this month, so don't worry :)

If Nikke Character wins, which one do you want more (Volume, Alice, or Rapi)?

Thank you everyone!

November Poll

Hi guys,

Meanwhile, I'm working on the Keqing slices and cuts I will create this poll for the upcoming November figure.

I will allow multiple choices. 

Thanks :)

Keqing WIP

Hi guys,

Here is the "final" Keqing WIP. I will start working on the slices tomorrow. I expect to send the rewards in 2-3 days. I will test the print right before I finish the cuts. 

-I made the nose a little bit bigger. 

-Mistsplitter Reforged added.

If there is anything you want to say to me, don't hesitate to contact me or comment below.

Tomorrow I will do the next polls. If you want to add some options you can comment here, and I will consider them....

Keqing WIP

Hi guys, 

I'm still working on the Keqing figure, I probably will need extra days to finish the figure. I will do my best to finish her at least by the end of the following week. 

I still have to work on:

- Mistsplitter Reforged Weapon

- Finish the Base

- Finish the clothes and some details.

Once I finish the figure I will publish a poll for the following figure.

Keqing WIP

Hi guys, 

I want to share an early WIP of Keqing, I expect to finish the model before November, but I will probably need extra days to finish the cuts. 

Some changes I want to do:

- I'm still thinking about which weapon to give her.

- Clothes and hair are not finished.

- I want to add more dynamism to the pose

Currently, I'm moving to another house. So I had to stop working some days, but I will work from now nonstop from now to finish her. 😊 2022-10-23 23:30:34 +0000 UTC View Post

Gawr Gura Chibi Release

Hi guys,

Here are the Gawr Gura Files! I didn't test the print yet, but it should be safe to print, anyways I will do a print test soon.

It comes with a Support version too. 

Now I will finish the Keqing figure for the end of the month. 😃

Gawr Gura / Keqing WIP

Hi guys, 

Gawr Gura chibi it's almost done I will send the files very soon! I need to do will some cuts and some changes to the base. 

I'm working on the T-pose model of the Keqing. It's an early WIP of him! None it's finished.

The pose's not the definitive version. I want to try some different poses when the base model is finished!

Thank you all Patreons 🥰

Gawr Gura and keqing WIP

Hi guys!

Gawr Gura it's almost finished. I'm doing the base and the pose right now. I will release it next week!

I also started working on the Keqing pose. I'm testing this base with an attack pose.

Thank you everyone for your support 🥰

Next Project - September+October

Hi guys, 

Poll it's done, Keqing won as the main character figure, I will also provide a second figure, and the second of the poll has been a Vtuber.

So The next figures I will do:

- Gawr Gura (chibi) -> It will be released on 2nd October, which I started working on.

- Keqing (full figure) -> It will be released about the 2nd of November

It will be the last Genshin Model I will do for a while (at least 3 months?).

Ganyu V5 final version

Hi, I already tested the Ganyu figure and it should be safe to print it. The figure should be fine to print on a larger scale. I do not recommend printing it on a smaller scale.

Please look at the assembly tutorial. Also, I recommend painting some parts first before assembly, but up to you ( •̀ ω •́ )✧

I have added:

- Base and Tree Supported version files

- Base Splitted

- Tree main 02 splitted

Fixes: 

- Leg Left gap wit...

Ganyu V4 fixes and Print done

The print is done, I did some improvements with the feedback the 3D printer gave me. Sorry for the poor image quality, was the photo the 3d printer gave to me.

The version is available on the same Google Drive Folder, or on the Cgtrader for those who bought it there.

Improvements:

- New Face option, with eyebrows and eye details. (Face V2)

- Added the gap between the left Arm and the chest. (Arm Left)

- Added more space between t...

Ganyu V3 files Update / Ganyu character print in progress

You can find the updated version in the same folder I sent you on the DM, or in the Cgtrader archives for those who bought it there

- I added Supports to the Ganyu character parts.

- Added -> Vision_V3 (was missing sorry)
- Modified ->  Cloak_Lateral_Left (I added a support) You can still using the last version, but you will need to glue it to the vision part.

Next Improvements:

- Base merged and splitted...

Changing the billing System to monthly.

Hi, I want to talk about the current billing system.

Currently, I have a per creation billing system. That means when I create a paid post, all the current Patreons will be charged for this creation.

I decided to use this system because I know for some months I won't be able to finish a figure so I only want to charge my Patreon when I know I can finish the figure.

But, seems like Patreon doesn't charge the Patreons who join after the paid post. Sorry, The Patreon documentat...

September + Octuber Figure. Ganyu figure sent!

Hi guys!

I run out of time this month to provide a good figure. So I will work these two months on the next figure (you only will pay once). I will do a Chibi too this month and I will release it at the start of October. Maybe the second choice on the poll will be the Chibi!

Btw, the Ganyu figure was sent! I will provide another face with facial details on it, Split and merged Base, and other extras on the coming versions. If any Augus...