Bed Level Files for Ender 3 (+ Ender 2 size, Ender Max size and CR-10)
Added 2024-07-08 20:13:54 +0000 UTCThere are two files required. 1) First run the FF_M0_bed_level.gcode file on your Ender 3 or any similar size printer with an 8-Bit board. Adjust each corner by running a piece of paper or Filament Friday sticker under the nozzle until you can barely move it then click the LCD knob to advance to the next corner. 2) Then run the FF_bed_level_print.gcode file and live adjust or "adjust on the fly" the bed level knobs to get as close to a level bed as possible. The print will continue multiple layers but you can stop the print at any time and then you are ready to 3D print without worrying about bed level. I also include the FF_bed_level_print.stl if you want to slice it yourself. 32-Bit Ender 3 V2 and newer Ender 3, Ender 3 Pro - For newer printers, Creality is now installing 32-Bit boards in the machine and running Marlin 2.0,x firmware. Some of these setups don't recognize the M10 command so I've created a FF_M25_bed_level.gcode version for these. It works the same but instead of just clicking the LCD knob you have to go into the print menu and select Resume Print to advance to the next corner. Also included in the .zip are bed level files for smaller Ender 2 printers (180x180 bed), Ender 3 Max (300x300 bed) and one for the older CR-10 printers.
