Hiii loveees <3 This is the ~~step by step of my horns!!! <3
Well, fiiiiirst you must choose the best reference pic to make the horns!
I usually use styrofoam to sculpt entire base, so the horns will be very light! So I sculpt every side with a utility knife! I also use sandpaper! ^^
Then I cover everything with epoxy clay, a simple layer is enough! Water helps epoxy to model, don't worry!
After about 2/3 hours, the epoxy will dry and then will remain rigid! Then it's time to paint! I used a red spray (semi-gloss) ~~ I expected to dry and now let's go to the details:
I start by using a small sponge in the dark areas, (simulating the shadows)! Acrylic paint in small quantity is essential! So finally, I add some highlights with the metallic gold paint!
AND DONEEEE!!! <3
Hope you likeeeee!!!!!!!!! I promise to do it in detail in the future! <3
Giu Hellsing
2017-06-21 01:36:25 +0000 UTCKath Cavalcante
2017-06-19 01:06:12 +0000 UTCGiu Hellsing
2017-06-18 18:14:58 +0000 UTCGiu Hellsing
2017-06-18 18:14:38 +0000 UTCGiu Hellsing
2017-06-18 18:14:20 +0000 UTCGiu Hellsing
2017-06-18 18:13:55 +0000 UTCGiu Hellsing
2017-06-18 18:13:48 +0000 UTCGiu Hellsing
2017-06-18 18:13:46 +0000 UTCAnt.
2017-06-17 13:10:19 +0000 UTCCesar Monteiro
2017-06-17 04:11:29 +0000 UTCErnesto Montalve
2017-06-17 03:26:45 +0000 UTCShatteredhalo
2017-06-17 00:49:33 +0000 UTCcasey sokolik
2017-06-17 00:36:19 +0000 UTCExplosive Joseph
2017-06-16 23:01:38 +0000 UTCarin clevett
2017-06-16 22:55:33 +0000 UTC