Echoform Vase
Added 2025-06-26 20:17:57 +0000 UTCHi there, wonderful people!
Some concepts just refuse to let go until they turn into some kind of reality, and this is one of those. I was contemplating some kind of classic vase design, but with things arranged around it that seemingly contravened the basic laws of vase mode printing, and that turned into "what if there were two vases!", and apparently some walls as well.
And so here we are! This vase mode print incorporates two vases in front of two contrasting walled nooks, and of course the entire thing is defined strictly a single perimeter. So there's really only one vase. (Just imagine a Matrix 'there is no spoon' here, along with thoughtful nodding)
Print Description
The Echoform Vase is vase mode model, so set your slicer accordingly!
Print Dimensions
By default, the Echoform Vase occupies 204mm x 86mm on the print bed and is 107mm tall.
Supports Needed?
Not at all! Designed for straightforward printing!
Scalability
As a vase mode print, this should scale quite readily up or down.
Print Orientation
The Echoform Vase prints right-way-up, as you'd probably guess.
File Location
You'll find this one at at 469 Echoform Vase
Link to dropbox post: https://www.patreon.com/posts/31697592
Further Thoughts
Fun fact, the vases don't actually touch the wall behind them, as that has a high risk of producing pockets and points that are not appropriate in a vase mode print. Instead, the vases are truncated slightly away from the wall and a thin fin is put in place to connect vase and wall.
Happy spiral printing!
xoxo
Sven.
