Introducing HATCHLINGS! - Mythical Pack!
Added 2025-05-15 21:34:10 +0000 UTCThis was a MAY 2025 Design and has been Archived!
If you were subscribed in May you will receive an email from MyMiniFactory within the week to access the archived files from that month.
If you are starting your Subscription in JUNE 2025, Welcome! Your exclusive models are available immediately in the Exclusive posts (link below) and the MAY Models will be in the MAY 2025 posts tab as they come out over the month!
https://www.patreon.com/c/cinderwing3d/collections
Hi Cinders!
Introducing a new line of designs called HATCHLINGS! These are the smallest scale designs that I've made and are meant to be printed tiny! I will be releasing these in Themed Packs over the months!
I've had a ton of requests for models that can go smaller then my "Tiny" designs, so here they are! These are STRONG and they have a great WIGGLE! These are pre-shrunk, but were also tested down to 60% scale of the file size - just make sure you have your printer settings dialed in if you plan to go below 100%. Each comes with it's own .3MF Color File - Thanks to Admin Jazzy! Like all my designs, please feel free to add straw holes, magnet holes, or keychain/earring holes or rings to accommodate your shop needs!
More packs to come! If you have a suggestion for the next pack theme please comment below! :)
-Tracy
----------------------------------------------------
FILAMENT and Tools:
https://www.amazon.com/shop/cinderwing3d
-----------------------------------------
All my designs are print-in-place (unless otherwise specified) and require no supports. All you need is a clean bed and you're off!
Designs are tested between 60%-100% for strength and articulation! I will not release a design that is too fragile at these sizes. All designs go through our Cinder Test Team!
Print Settings: .2 Layer height, 15% infill, gyroid infill, no brim, and no supports. (If there are smaller parts of your print that have a hard time staying stuck to the plate, please try a brim around those parts) Any errors regarding floating regions can be safely ignored.
Please join our discord chat below for more help and discussions.
------------------------------------------------------
6 Design Drops - May 2025 Models: HERE
Tiny Highland Cow - RELEASED
No Horn Version
Horn Version
(2) .3MF Color Files
Tiny Ocean Dragons - RELEASED
Wyvern
Dragon
(2) .3MF Color Files
Hatchlings - Mythical Pack - RELEASED
Hatchling Dragon + .3MF Color File
Hatchling Hippogriff + .3MF Color File
Hatchling Unicorn + .3MF Color File
Hatchling Hippocampus + .3MF Color File
Hatchling Purrmaid + .3MF Color File
Hatchling Lochness Version Scales + .3MF Color File
Hatchling Lochness Version Spikes + .3MF Color File
Secret design
Secret design
Secret design Cinder-style Dragon
-------------------------------------------------------
PLEASE READ
Please remember, with Active $10 Commercial License Tier Support, you have a Commercial License to legally sell the 3D PRINTS ( Not Files ) created from any of my Designs on any platform EXCLUDING Temu, Alibaba, and any other drop-shipping platforms or services. Example: Amazon listings cannot be supplied by a drop-shipping company. These such violations will be taken down and membership and Commercial License will be revoked.
This License is for YOU to print and sell, not for a factory to print on demand for you. Our goal is to support small businesses.
NO sharing, re-selling, or distributing this digital file or modifications of it in any way. Also, you are not authorized to use Cinderwing3D photos or anyone else's photos without their permission.
---> Please see WELCOME POST for questions, all exclusive releases, and links: https://www.patreon.com/posts/welcome-to-info-71819754
All Supporter Exclusives: https://www.patreon.com/cinderwing3d/collections
Link to the PUBLIC MODELS and Exclusives Full Index List:
Discord is our MAIN form of communication and way to provide help! Please join our community below: Discord chat HERE: https://discord.gg/cinderwing3d
For any help requests or issues please go through this email: Email (contactcinderwing3d@gmail.com) OR through a Discord ticket!
Thank you, Cinders, for your support!!! And Thank you to our Admin Jazzy and Test Team for all your hard work!
Comments
Hey there, as the post says, you should have gotten your MMF redeem email, if you didn't get it, please direct message/private message me! Or file a Discord ticket!
Tracy Francis
2025-06-25 02:19:59 +0000 UTCHello, I subscribed about 1-2 months ago. Great work. I am unable to click the file to download these little guys. Any advice?
Justin Buell
2025-06-24 23:44:17 +0000 UTCLove these! Canโt wait for another set
Justin R MacBain
2025-06-16 01:21:52 +0000 UTCThese little guys are amazing. Cant wait to see more iterations.
Brooks Whitford
2025-06-02 13:22:32 +0000 UTCYes a phoenix or griffin would be amazing.
Zach Roth
2025-05-29 19:02:30 +0000 UTCSuch a HUGE hit with my daughter! Would absolutely love eggs for these!
Danielle King
2025-05-28 05:30:08 +0000 UTCI would love to see a Phoenix hatching (itโs my favorite dragon and biggest seller). I would love to see a unique egg or container specifically for these hatchlings. I would love to see the Griffin without a mix, a pure Griffin hatchling! Iโd also love to see the Griffin as a Tadling, baby, and adult!!! (Like the Peacock & Phoenix)
Aaron Comins
2025-05-25 16:07:46 +0000 UTCWishing for more of these little ones. They are a hit!
Chantal
2025-05-24 23:25:14 +0000 UTCYep!
Tracy Francis
2025-05-23 05:57:13 +0000 UTCcan they be printed bigger then 100% with no issues
Mayhem
2025-05-23 02:18:32 +0000 UTCI just put these on the printers and they are beautiful!! You are so talented even with their size the details were phenomenal
sNp
2025-05-23 02:04:04 +0000 UTCI do not plan to do so, no
Tracy Francis
2025-05-23 01:57:55 +0000 UTChello have you ever tried doing the eyes separate for the no ams printers?
Jessica
2025-05-23 01:10:52 +0000 UTCI love these so much!
M2G
2025-05-22 17:01:49 +0000 UTCThese are just FANTASTIC! I love them so much. PLEASE make more! My customers LOVE all these!
Silvyr
2025-05-22 00:25:32 +0000 UTCDefinitely need more of these they're awesome! ๐
Danii
2025-05-21 20:40:49 +0000 UTCStraight on the printer!
Keirra Hourn
2025-05-19 22:20:42 +0000 UTCI want a Pegasus and alicorn
Tanjiro Kamodo
2025-05-19 19:21:11 +0000 UTCThese are a great addition to our minis. Thank you so much!!
Stephanie Allen
2025-05-18 23:18:42 +0000 UTCI don't remember what I used for these ones, sorry!
Tracy Francis
2025-05-18 18:23:11 +0000 UTCI vote for a liger
Dustin Bowman
2025-05-18 16:37:21 +0000 UTCOMG! I freaking love these. I have already printed several plates with each of these. I can't wait to see more in the future.
Kelsi Sheets
2025-05-18 15:08:16 +0000 UTCHave had the printers going non stop with these guys!! They print really well with no brims required. Have held off on the Hippogriff as I really wanted to use the colour that was used in the photos, but havenโt been able to find it locally, so patiently waiting for it to be uploaded so I can see if I can get it in Australia. ๐ค๐ผ
Paula
2025-05-18 04:51:07 +0000 UTCThey print SO WELL!!!!
Trent Lilly
2025-05-18 04:20:33 +0000 UTCI'm obsessed with these! Can't wait to print! thank you!
Des Demona
2025-05-18 02:57:44 +0000 UTCSOOOOO SUPER CUTE!!!
Sabrina D
2025-05-18 01:12:11 +0000 UTCI need more of these! <3
Karli Kehres
2025-05-18 00:59:45 +0000 UTCWow Love them definitely printing. Thank you
ItoHernandez_PR
2025-05-17 00:35:38 +0000 UTCI am SO excited by these!
Kendra Kent
2025-05-17 00:30:04 +0000 UTCCool! Some ideas: 1. Pet pack (cats, dogs, fish, horse, etc) 2. Zoo Pack 3. Jungle Pack.
Ed
2025-05-17 00:28:06 +0000 UTCI know some slicers are able to do it, but I haven't taken the time to figure it out yet. I just use one of those tiny loops that screw in, heat the end a bit, then screw it into the head or something and attach the keychain bit.
Dani Bruce
2025-05-16 23:25:17 +0000 UTCThis is my absolute favorite thing that you've made in a while! My customers are going to LOVE these!
Andrea Gress
2025-05-16 22:46:10 +0000 UTCLove these! Would love to see a griffin. That's my daughter's school mascot.
Michellylynn
2025-05-16 22:33:24 +0000 UTCOMG!! going to the printer right now!!
Cindy Arnold
2025-05-16 21:53:28 +0000 UTCOHMYGOSH! I love these sooo much!
Aimee Riha
2025-05-16 21:44:26 +0000 UTCI am so excited to see mini's! Mini's are one of our best sellers and we are always looking for new ones :)
michael alfaro
2025-05-16 17:33:09 +0000 UTCOMG!! LOVE these sooooo much!!! Tiny and mythical/cryptid is the best combo =)
Erika Tucker
2025-05-16 17:03:03 +0000 UTCThese are great! Thank you :)
Iain
2025-05-16 13:54:57 +0000 UTCYes and a Griffin along with hatchling griffin
Ashleigh King
2025-05-16 12:55:54 +0000 UTCO.M.G. these are incredible! Something new, different, unique, and absolutely ADORABLE!!! I love these!!! I can't wait to print these!
Speedtorch
2025-05-16 10:40:58 +0000 UTCA small egg for these would be great or if you had an idea what size to print the bigger eggs for these tiny animals. The kids love an egg and an animal in the egg. I have had some people asking for a mini dragon. Thanks
April Sheridan
2025-05-16 10:12:23 +0000 UTCAlso for suggestions - my daughter suggested a catticorn, she loves Cats and loves Unicorns and the two combined would be the best!
Paula
2025-05-16 07:58:17 +0000 UTCSuggestion/ Request. Cow-Mermaid, a Sea-Cow. Kind of goes with your sea horse (Hippocampus). Take a look at this Super Mario ish enemy, but make it cute and your style, bonus points if it looks like a Highlander Cow. https://www.mariowiki.com/Moofish
Joel Porter
2025-05-16 07:50:17 +0000 UTC40% scale on 0.4 nozzle came out great, all joints work perfectly!
jeremy Schuit
2025-05-16 06:16:46 +0000 UTCSuggestion : Jungle Mini's, Farmhouse Mini's, Zoo mini's , Pet mini's
DragonsNanny
2025-05-16 05:56:32 +0000 UTCHow do you add holes for magnets or earrings and keychains?!? ๐คฆ๐ปโโ๏ธI see Iโve yet so much to learnโฆ.
Michelle T
2025-05-16 05:19:36 +0000 UTCOH EM GEE These are ridiculously CUTE!!! Eeeek I know whatโs printing tomorrow ๐
Michelle T
2025-05-16 05:12:39 +0000 UTCI really want a full size hippogriff now...
Kendra Work
2025-05-16 04:21:22 +0000 UTCLooks like a gold silk, a bronze silk, black matte, and white. Assuming the colors aren't uploaded yet
Raptorsue Demondrake
2025-05-16 04:04:35 +0000 UTCJaw dropped with these. Really nice thank you
Print in Paradise
2025-05-16 02:24:17 +0000 UTCLove!!! Canโt wait to print them!
Kayli Kelley
2025-05-16 02:13:25 +0000 UTCMy 11 year old son has the Hippogriff printing, okay really he has 10 printing. He said mom this is the best, he had to explain it is in Harry Potter to me.
Toshua
2025-05-16 01:14:05 +0000 UTCthey are too cute ๐
Penny Ellen (book.nerd.magic)
2025-05-16 01:12:07 +0000 UTCCan you please let us know what colour that is for the Hippogriff? Love it - looked on your Amazon, but not yet uploaded. I was wondering what I was going to print this weekend - guess I have my answer - all these adorable creatures!!
Paula
2025-05-16 00:55:47 +0000 UTCthese are adorable!! can't wait to print them!
Jami
2025-05-16 00:20:10 +0000 UTCSuper cute!!!
JMac Creations
2025-05-16 00:14:09 +0000 UTCAmazing job on these designs <3 Thank you for making these! Can't wait to see the smiles on our customers faces at our booth, they are going to adore these
Amethyst Forest
2025-05-16 00:04:52 +0000 UTCAdorable! Love the soft roundness of these models. People always comment that they feel nice in the hands.
3D Sunbeam
2025-05-15 23:53:26 +0000 UTCTesting 40% scale, full color, 0.4 nozzle, 0.16 layers with adaptive....ha they are friggin itsy bitsy....7 hours to do 20
jeremy Schuit
2025-05-15 23:51:45 +0000 UTCGaaaaaa I love these so much! Any idea how long it takes for the colors to get uploaded to Amazon? I'm trying to figure out the hipogriff colors lol.
Tiffany Blassingill
2025-05-15 23:25:02 +0000 UTCThese are perfect ๐
Lisa
2025-05-15 22:54:43 +0000 UTCAs I said in the post, yep!
Tracy Francis
2025-05-15 22:50:39 +0000 UTCLove them! Can I put holes for keychains and for straw charmers?
Vic
2025-05-15 22:48:10 +0000 UTCIโm loving these! Canโt wait to see what minis you do next!!
Jordin Hitt
2025-05-15 22:32:29 +0000 UTCYour absolutely amazing you have definitely earned my subscription for life lol^_^
Andrewcooke
2025-05-15 22:19:15 +0000 UTCThey are at 80%
Tracy Francis
2025-05-15 22:18:54 +0000 UTCAre the ones in the image 100%? Excited to see the size differences.
jpborden
2025-05-15 22:11:22 +0000 UTCthese are legit tbh
Sarah
2025-05-15 22:08:15 +0000 UTCOh my goodness! These are sooo cute! My class will surely flip when I print these for them!
Ace High
2025-05-15 22:06:58 +0000 UTCthat means so much to me <3 I really try to give you all as much as i can!
Tracy Francis
2025-05-15 22:06:25 +0000 UTComg i love them, thank you!!!
Natalia Travis
2025-05-15 22:04:43 +0000 UTCperfect My minnies were getting low (>1000). Everyone keeps asking for dragons in the minnies, but the tadlings are in the Littles. I kind of wish all 5 P1S were not fully running.
LoveBugDesigns.us
2025-05-15 22:04:23 +0000 UTCOh my goodness!!! I need to tear my printer apart today and fix it so I can print these ๐
Karli Kehres
2025-05-15 22:03:52 +0000 UTCYou are seriously the BEST patreon ever!!! ๐
Marissa
2025-05-15 22:01:27 +0000 UTCYESSSSSS!!!!
Kristin Coker
2025-05-15 21:58:42 +0000 UTCThese are awesome thank you!!!!
Rachel Georgandas
2025-05-15 21:56:37 +0000 UTCAwesome! Love these
Stargazr69
2025-05-15 21:56:00 +0000 UTCmaybe a small butterfly
Morgan
2025-05-15 21:55:04 +0000 UTCGlad I had multiple machines sitting idle. Now I can stock new Minis and Micros at the same time. LOVE seeing something new Cinder
Jeremiah
2025-05-15 21:54:17 +0000 UTCYes been waiting to print some of these๐ฅณ
Bolt3DDesign
2025-05-15 21:51:28 +0000 UTCLOVE
3d.elements.boutique
2025-05-15 21:51:07 +0000 UTCOmg adorable!
Kathryn McMurray
2025-05-15 21:50:59 +0000 UTCYou shouldnt need a brim but they are tiny so it wont hurt! Def try without one!
Tracy Francis
2025-05-15 21:50:50 +0000 UTCMLove these
Nathan Gray
2025-05-15 21:49:22 +0000 UTCOh my gosh how stinking cute are these!
Jeneanne Mccaskey
2025-05-15 21:47:42 +0000 UTCdo they need the brim or can i turn it off?
Rachel Nunez
2025-05-15 21:47:18 +0000 UTCnot yet :)
Tracy Francis
2025-05-15 21:44:00 +0000 UTCDo you have full scale hypogriffs? These are great!
Chris Roberts
2025-05-15 21:43:13 +0000 UTCThese are adorable! ๐
The Cheeky Geek
2025-05-15 21:42:37 +0000 UTCLove love love these!!!!
Charity
2025-05-15 21:42:09 +0000 UTCOh my goodness!!! ๐๐๐๐
Heather M
2025-05-15 21:41:19 +0000 UTCThese make my heart so happy! :)
Kathleen Soukup Field
2025-05-15 21:40:47 +0000 UTCoh and owlbear!
Rachael M
2025-05-15 21:40:45 +0000 UTCAhhhhhhh purrmaid
MB Prints
2025-05-15 21:40:00 +0000 UTCamazingggggggg
Trung Nguyen
2025-05-15 21:39:29 +0000 UTCI love these. They are EXACTLY what Iโm looking for. Thank you!
Jazzy Bee
2025-05-15 21:38:41 +0000 UTCLOVEEEEEE
Erica Fuentes
2025-05-15 21:38:40 +0000 UTCLOVE LOVE LOVE them!!! Thank you Tracy!!
Giamarie Saponaro
2025-05-15 21:38:34 +0000 UTCcat dragon and griffin hatchling!
Rachael M
2025-05-15 21:38:24 +0000 UTCYES!!!! ๐๐ป Minis are by far my best sellers, and I LOVE THESE!!
Paradoxal_Dinosaur
2025-05-15 21:37:51 +0000 UTCOMG I love these!
Veronica Blazewicz
2025-05-15 21:37:38 +0000 UTCMy Cookiecad Filament ready for these!!!
Charles
2025-05-15 21:37:01 +0000 UTCOk these are too cute, when I am done with my python i am pringting I will print the purrmaid
Nicole Perkins
2025-05-15 21:36:52 +0000 UTCLOVE THIS!!!
D3D Prints
2025-05-15 21:36:42 +0000 UTCThese are amazing ๐
Bens print shack
2025-05-15 21:36:28 +0000 UTCShut the front door! Those are adorable!
Amber
2025-05-15 21:35:50 +0000 UTCVery cute
Dustie Chase
2025-05-15 21:35:44 +0000 UTCOmg they're so adorable
Maddog M
2025-05-15 21:35:41 +0000 UTCAww, yeyyyy
Hailey
2025-05-15 21:35:36 +0000 UTC
