Articulating Print-in-place CINDER WOLF!
Added 2023-12-12 23:10:37 +0000 UTCThis was a DECEMBER Design and has been Archived! If you were subscribed in December, you will receive an email from MyMiniFactory within the week to access the archived files from that month. If you are starting your Subscription in January 2024, Welcome! Your exclusive models are available immediately in the Exclusive posts (link below) and the January Models will be in the January posts tab as they come out over the month! https://www.patreon.com/cinderwing3d?filters[tag]=Exclusives
If you missed this model or any others they are available on MMF for purchase! Please use the Discount code: CINDERJAN24
https://www.myminifactory.com/users/Cinderwing3D?show=store
-----------------------------------------------------
Hi Cinders!
So excited to release to you all my CINDER WOLF design! I worked SO hard to avoid a pop-in head and was able to get it to be COMPLETELY Print-in-place!
The head prints upwards and has been PRE-SUPPORTED - so do not add any supports! I am attaching a video to another post showing how to simply remove the neck support after a print! It's really easy! LINK: HERE
We have tested this wolf between 100% and 60% and it is so fun to play with! It also looks great in a single color filament - making simple and fast prints! I hope you all enjoy this! :)
-Tracy
Filament: https://www.amazon.com/shop/cinderwing3d
- Locyfens: Shiny Red Gold Black
- Amolen: Red/Black Duel
------------------------------------------------------
DECEMBER Models:
- BABY Mistletoe Dragon EXCLUSIVE - RELEASED
- Festive Frogs - RELEASED
- Cinder Wolf - RELEASED
- Secret Design
- Secret Design
-------------------------------------------------------
PLEASE READ
Please see WELCOME POST for questions, all exclusive releases, and links: https://www.patreon.com/posts/welcome-to-info-71819754
Discord is our MAIN form of communication and way to provide help! Please join our community below: Discord chat HERE: https://discord.gg/cinderwing3d
For any help requests or issues please go through this email: Email (contactcinderwing3d@gmail.com) OR through a Discord ticket!
Thank you, Cinders, for your support!!! And Thank you to our Admin Jazzy and Test Team for all your hard work!
Comments
Speed and cooling usually!
Tracy Francis
2024-10-18 22:26:36 +0000 UTCThe neck support on this: while it worked great on my Qidi Tech it doesn't work in my bambu. Not sure of the difference
Lorna House
2024-10-18 12:38:51 +0000 UTCwhat part is the supports and what is not
Keirra Hourn
2024-03-12 05:24:26 +0000 UTCAfter two days of time gone and about half a spool of filament, I finally gave up and added tree supports to get past the head. Still looks pretty rough underneath the head but at least it finished and is functional. Even with slow speed and even slower overhangs, it was still a white knuckle experience. I know print in place is cool, but I wouldn't mind a separate head for these models that snaps on to eliminate these issues altogether.
Maury Rice
2024-02-26 14:53:15 +0000 UTCEnder 3 S1 Pro. First attempt, failure at the head joints. Second attempt, slowed everything wayyyy down once it got to the head. 5h7m in, will update. Update: two out of five wolves have successfully printed even slowing down to 20% of my usual speed. For whatever reason three wolves still failed at the same settings the other two succeeded.
Emma Liz
2024-02-03 20:09:22 +0000 UTCyou should make a crystal wolf
carson
2024-01-20 20:54:16 +0000 UTCPrinted great on my X1C. Slowed everything down. I have learned slowing the acceleration down helps a lot.
Andrew Gosnell
2024-01-03 01:51:04 +0000 UTCFirstly, I printed this model on Bambu, Aquila and Vyper. I've slowed down the speed on each and id say at least 20+ tries with 1 "ok" print. I've given up trying. The dragon was perfect. Thanks for all you do
Michael Davis
2024-01-01 18:21:57 +0000 UTCI was wondering if that was the case, I have a slower plate of them printing right now! The ones that I did print sold SO WELL, so I am hoping it works!
Meagan
2023-12-20 01:27:16 +0000 UTCWe recommend going slow for this model, the bambus go way too fast for overhangs on default settings for this particualr model
Jazzy
2023-12-20 01:24:06 +0000 UTCI love this wolf!! Unfortunately Iβve had so many fails from the neck support breaking off that I donβt think I can continue to print unless you have advice for fixes? I use a Bambu X1C, Iβve tried on both machines with the same result :(
Meagan
2023-12-19 21:49:40 +0000 UTCUpdate. FYI using an Ender 3 S1. Turns out I was printing to fast. Slowed the print down to 80% speed and I now get wonderful prints, both in standard PLA and Silk PLA. Basically 80% of the default speed of your slicer settings for your printer. I have pictures and vids on twitter. I will share later to the Discord server.
Gerhard Grobler
2023-12-18 22:42:04 +0000 UTCMy P1P has been making them no problem at 0.12
Fantasy Forms
2023-12-18 14:44:35 +0000 UTCEnder 3 S1 pro. Have tried .15 and .20 layer heights. This begins to fail on the neck at layers 217/218 and 238/239. The support "ball" contact area is not large enough to allow the head parts to adhere properly and it loses strength. Breaks away a few layers later in one or both of these areas for me. Will try it on a bambu x1 in the next few days for comparison.
James Brady
2023-12-18 06:45:54 +0000 UTCSo glad to have a wolf! It's the mascot for my daughter's school and I've tried printing wolf models I've purchased from other designers, but none of them worked very well. (I gave up and the teachers got dragon tadlings instead. π)
Josh Carter
2023-12-17 22:41:14 +0000 UTCIn the process of printing one for my father in-law rn, he loves wolves!! Very cool model!!!
Eric Belske
2023-12-17 17:04:39 +0000 UTCOkay, 4 attempts down, 1 success out of 4. I use a Creality Ender 3 S1. 1st one, I used CHEP's Cura settings to get a 7 hour print time. The filament welded itself together on the joints. So tried Prusa slicer. 12h30 minutes print. It decapitated my poor boy. Then tried Creality Print with normal PLA. Came out perfect. Tried it with the silk. Failure on the same g-code. Now tried it with normal PLA again. Fail on the tail. Same happened on the silk. FYI I used the standard settings. Is the slicers going to fast for sensitive areas? Only Cura alliws you to isolate and slow down areas, I think. And I so wanted to present Cinder wolf meets Ice wolf to your discord. Could my silk OLA be to moist? Affecting layer adhesion? It has been open for over 6 months now? Or should I try upscaling the model for stronger walls, reducing risk of collapsing?
Gerhard Grobler
2023-12-15 10:53:46 +0000 UTCThis is all fantastic feedback thank you!
Jazzy
2023-12-15 04:52:10 +0000 UTCI reduced them in size to 65-75% to see if I could get two on my BL-X1C-C bed which I did. What I discovered is the neck supports at times are on the hairy edge of insufficient. When I used a Sunlu PLA Silk I had about 25% success - all failing because the supports failed at the last widest printing stage of the upper head section... What happened is the supports would give way, the head would then wobble and the print head would hit it eventually breaking bed adhesion of the front legs and front body section then it was spaghetti head city. The BL PLA Basic printed fine every time using the exact same parameters. Hopefully at higher percentages the supports are also thicker and therefore it shouldn't be an issue but my point with all this is be sure to consider your filament strength as part of the equation. I now have three great looking dogs and three perfect resident evil dogs... I may try to see if I can print and replace just the upper heads section to fix/demutate them. They look sad all blowed up and all...
Ron Barrett
2023-12-14 20:23:35 +0000 UTCJoin the discord and post!
Lucas Tucker
2023-12-14 15:05:13 +0000 UTCQuick update, I tried printing on the P1P we have and they printed. The neck supports were barley attached but held and came off easy. Only difference in the settings was the the outer wall acceleration was 2500 instead of 5000. Not sure if I got lucky of if this is a contributing factor. The models look amazing.
Crescent Creations 3D
2023-12-14 08:09:53 +0000 UTCI printed at 100% on an X1-Carbon with no trouble. I don't know if it has a better ability to deal with the problem areas you're seeing here, but my model is perfect. I'm now printing it on a slower Neptune 2S. I'll let you know if it has any problems.
BMS Imaginarium
2023-12-14 01:38:44 +0000 UTCPrinted this with Bambu Lab Matte Grey at fine resolution, and it's amazing. I was going to ask if this can be scaled up, but I see someone's already done it at 200%. I'm going to make a big one!
BMS Imaginarium
2023-12-14 01:34:32 +0000 UTCPrinted at 200 percent wish I could show you! Iβm so excited!! Heβs so perfect!!
Jennifer Zorrilla
2023-12-13 23:05:14 +0000 UTCAt minimum 50% of our testing is done on Bambus, the rest is various Enders, Anycubics, and Sovols last I checked. We had stellar results for those printers between the usual scalings. That being said we will look into this.
Jazzy
2023-12-13 20:54:29 +0000 UTCAfter a bit more looking, I can actually see there's just too little for the bambu to lay the outer wall of the spherical supports on, meaning there's just nothing being created. If you look closely at the slice, there's just a small dot, it'll pick that straight up next time round if it even sticks down. I don't think that without slowing it down to a typical ender speed, and then also lowering the acceleration, that it's going to be able to do it.
Shannon Hill
2023-12-13 19:18:46 +0000 UTCI use P1s's too, I just sliced it at .2 layer height and can immediately see problems, the supports are spherical which is the first issue, then there's a massive gap between the model and the support, I don't think it's close enough to be classed as a support on it and with the Bambu's being so accurate, it's going to be difficult for it to work. The reason I say the spherical supports are a problem is because between bedslingers and corexys I have noticed that the corexys struggle a bit more with round objects. Between the speed and the different movement, it causes it to be knocked more. I'm going to do some test prints tomorrow on it, for now I'd suggest slicing the model at the neck, do a few test prints, see where it's failing, and then report back for other's see if they can work out a solution.
Shannon Hill
2023-12-13 19:03:00 +0000 UTCI'd highly recommend tuning overhangs and flow as those both of those are really important to this model
Jazzy
2023-12-13 18:57:22 +0000 UTCThe important thing is to go slow on overhangs as the neck area is just a bunch of overhangs lol
Jazzy
2023-12-13 18:56:47 +0000 UTCHi, I love the design but I cannot get it to print. I have tried 120%, 100%, 70% and 50% on multiple P1S printers and all failed at the neck. No extra supports and running 50mms using silk. Any tips would be apricated.
Crescent Creations 3D
2023-12-13 18:15:37 +0000 UTCYes!!!!!! Printing this as soon as I'm home! Dang work getting in the way! Lol I'm so excited for this one!
Jennifer Saunders
2023-12-13 18:06:33 +0000 UTCPrinted it last night. Came out prefect!!!
Kenneth James
2023-12-13 16:44:16 +0000 UTCAm I doing something wrong? the head on this guy keeps misprinting on the lower jaw.
Donald Holloway
2023-12-13 13:55:14 +0000 UTCI just finished printing my goodest boy. This one, Iβm keeping for me.
Kristi Pearce
2023-12-13 05:50:44 +0000 UTCA lovely change from your other designs, And just in time to pop out a few as christmas presents.
Gerhard Grobler
2023-12-13 03:57:23 +0000 UTCAlready on the printer. Will try to post on the discord channel. Don't have any browns or greys, so went with a silk blue PLA, may try for the Kingfisher rainbow next May look strange as the roll is currently going from light purple to green.
Gerhard Grobler
2023-12-13 03:56:11 +0000 UTCAnother amazing toy that I won't be able to keep my granddaughter from stealing. π
BMS Imaginarium
2023-12-13 02:35:38 +0000 UTCThis is seriously cool! Love it!
Jayde Hilliard-Simpson
2023-12-13 02:12:04 +0000 UTCI LOVE LOVE LOVE this wolf!
Angelina Maria
2023-12-13 01:32:25 +0000 UTCπΊπͺπ½ππ½ now the variations, crystal, forest etc. sooo nice, TY πππ
Lorenzo
2023-12-13 00:40:46 +0000 UTCnice...nice time to print a pac of wolves.....
Badlands
2023-12-12 23:32:44 +0000 UTCπ
Awoken
2023-12-12 23:31:35 +0000 UTCShut up this is awesome! π€©
Amanda
2023-12-12 23:27:50 +0000 UTCNo, not much to paint really, we try to focus on bigger paint jobs as time permits
Jazzy
2023-12-12 23:25:30 +0000 UTCIs there going to be a painted version of this coming out?
Vinny Ferraro
2023-12-12 23:24:43 +0000 UTCOMG!!!!! my daughter is going to FREAK! Love this!
Nicole Martin
2023-12-12 23:21:20 +0000 UTC;)
Tracy Francis
2023-12-12 23:20:14 +0000 UTClove your work. this is awesome..
Maddog M
2023-12-12 23:15:45 +0000 UTCππ
the newzie
2023-12-12 23:15:44 +0000 UTCPumped to see the variations
MB Prints
2023-12-12 23:15:31 +0000 UTCLove the wolf! You did a wonderful job! Can't wait to print it
Sneezy Fey
2023-12-12 23:14:40 +0000 UTCI am going to print a pack of wolves! Thank you for this lovely design!
Craycraft Witchcraft
2023-12-12 23:14:29 +0000 UTCSo i assume next will be a cat? :)
Sneezy Fey
2023-12-12 23:14:16 +0000 UTCWith a late entry, I think this will win the βCinderwing Design of the Yearβ award!
Vinny Ferraro
2023-12-12 23:13:13 +0000 UTCLove this!! β€οΈ
Kellie
2023-12-12 23:12:31 +0000 UTCOh! This looks awesome!!!
Maria Chacon
2023-12-12 23:12:21 +0000 UTC
