Nov 1 Drop
Added 2023-11-01 18:05:39 +0000 UTCHello all- I tried to get a good variety of prints here. Over 20 files in total I believe. The next drop will have more Christmas items so all will have some good items for the upcoming holiday. I am low on filaments so on my test prints I had to use what I had. Plus, most of my printers are being used up for an upcoming show. Also, if you guys are okay with it, I would love it if you could go give my business page a like and follow :) https://www.facebook.com/WilliamsIndustries.org
Pins, coasters, keychains, wall art- Remember most of these can be scaled to fit whatever need you want. I always try and do at least one of them with all those options in each drop so you can use it as a template. If you want double sided items, just remove the "rear" object that I added. I did the holes for the key chains so you can remove them in BS if you want them as pins. In those cases, you will want a solid back to reduce waste since the back will not be visible. You can either add the rear file in the folders, or, you can pain it black in BS.
Face down prints- I use 0.16 for the first layer, 0.2 for the rest, arachne walls, 4 bottom layers and for anything coaster size and down I do 100% infill. 10-15% infill for larger items. I also at times will switch to a lower first layer speed if I need to. OR if you do not mind the extended time, you can switch to a 0.2 nozzle for finer detail. NO brims or supports on any of these.
FB Patreon group: https://www.facebook.com/groups/585869610371951
Adhesive putty for door corner art: https://a.co/d/26zGELj
Command strips for wall art: https://a.co/d/60qT5A8
Google drive for files: https://drive.google.com/drive/folders/1veEM71_DSne1_A1QknzsmhBBcNUE9iLe?usp=sharing
