Merry Monday yall! Welcome to this weeks drop, we have about 12 files in this one! Sorry it is a bit later in the day, but I went on a quick getaway with the family this weekend so I was a little behind on a couple of test prints.
The creature of the black lagoon was a fun one, I am glad yall voted for that one to be next! Feel free to use the adaptive layer height setting to help with some of the finer top surface details. I notice that it helps a lot with some of these prints with the...
2025-09-29 23:35:35 +0000 UTC
View Post
Merry Monday everyone!! Have some fun ones that I have been working on.
First off, the Pocket Pet for this week is the headless horseman! The next pocket pet for next week will be The Creature From the Black Lagoon!
The boo characters are off set so they print face up, I made them a little thinner to save on time, but feel free to make them thicker, they stand up just fine this was though.
I have been working on some new Horror Tarot Cards, I have 9 of them in this drop, and...
2025-09-23 23:42:44 +0000 UTC
View Post
Hello all, I had to do a re-work on the Headless horseman, going to work on that today and do the test print tonight so I can do the drop by tomorrow. We should have about 9 files being dropped tomorrow. It will include a pretty fun series that I have been working on as well. This will be fore the paid tier, but below are a few free files for all.
You will see that I have updated the desk buddy stand, this is to make int more minimal and cleaner looking than the previous one. It also h...
2025-09-22 16:14:20 +0000 UTC
View Post
Hello all,
The next pocket pet that will be released on Sunday is going to be the Headless Horseman. Please take a vote for what the next Pocket Pet should be after that. These are being released on the paid tier, there will be some available for personal use for all, but to get full access to everything including the commercial use, you will want to join the paid tier. I am also working on a couple of candle holders and planters, both Halloween themed, so stay tuned for those!
2025-09-19 17:43:15 +0000 UTC
View Post
Merry Monday yall. Here is our next drop, have a fun mix here for yall. For the baby mothman you have a few options to print from. Feel free to add a hole to make it as a keychain or add a negative space and pause to make it a magnet.
The hot dog bumper has the pauses already for ya, I kept the negative space in BS so you can adjust it according to what magnets you have on hand. Depending on where you live, just make sure you use the right type of filament for your weather.
I will...
2025-09-15 16:29:24 +0000 UTC
View Post
Merry Sunday yall. We have two pocket pets, had a lot of requests for Ghostface so here ya go. I also did a bonus one from Scary Movie. I wanted to add some fun art today as well so there are a couple of new bathroom/home decor signs. Also, the lowercase "n" in the 7 Eleven logo always bugged me, so I had to fix it :)
Next week in the drop we will have some more horror knives and for the pocket pet, we will be doing a mothman. I am also thinking about doing some other cryptids in the co...
2025-09-07 23:51:37 +0000 UTC
View Post
Hello all,
Here is a bonus drop that is part of our new set of horror knives. I will be working on many more styles. These can be scaled down for keychains, earrings, bookmarks, or whatever else you see fit. I hope you enjoy these.
This Sunday we will be dropping two different Ghostface pocket pets, so stay tuned!!
2025-09-05 18:25:51 +0000 UTC
View Post
Happy Sunday yall! This week we have the Plague Doctor Pocket Pet. There are 3 styles to choose from. One is just the normal one, a magnet one (add a pause to insert the magnet), and one with a key loop.
I will do a bonus drop in the next couple days for a fresh set of Horror themed knives.
The next pocket pet will be Ghostface in the drop on 9/7.
As a reminder, we are doing weekly drops that include at least one pocket pet/mini. There will also be a couple of bonus drops as...
2025-08-31 21:36:39 +0000 UTC
View Post
Hello all,
Happy Free File Friday. These are files that are available to everyone to print for personal use. Commercial use is for the paid tier.
For The Toxic Avenger pocket pet, I did this one pretty quick for the US theater release of the movie. I wanted to make a bunch of these to give out at the movie theater this weekend.
THE TOXIC AVENGER...
2025-08-29 19:08:53 +0000 UTC
View Post
Merry Sunday yall,
I will be releasing a new pocket pet every week for our Halloween/Horror theme. I also will be releasing a ton of new horror knives. The knives can be done as art, bookmarks, keychains, and earrings.
The pocket pets will also have profile so you can use them magnets as well. The next pocket pet will likely be a plague doctor. All pocket pets are meant to be easy prints and require no supports.
Next week I will also be adding a drop for our usual fun art ...
2025-08-24 20:50:48 +0000 UTC
View Post
Hey Yall,
This weekend we are releasing the first in the Halloween Pocket Pet series, Oogie Boogie! This will be available on the paid tiers. We will also be releasing the first set of some new horror knives. Next week will be some more fun wall art type stuff.
2025-08-21 17:25:30 +0000 UTC
View Post
Hello all,
Very excited for our Halloween/Horror theme for the next couple of months. I will still do some of our standard fun stuff as well too. The next several Pocket Pets will be Halloween/horror theme, so, I wanted to take a poll on which ones you want the most. I will use those results to determine which ones to release. Most of these will only be available to the paid patrons, I will likely release some publicly.
2025-08-18 17:58:55 +0000 UTC
View Post
Hey yall,
It is the best time of the year.... Where we kick-off our Halloween/Horror theme. I will make it a mix of files so it is not just Halloween/Horror, and I will still be working on all the requests that come in.
For the My Little Xeno, there are a few plates do choose from depending on how many colors you want it to be. Just be a little careful when removing the supports from the teeth, but so long as you are not aggressive with it, you will be fine.
I also got a req...
2025-08-11 16:50:20 +0000 UTC
View Post
Happy Wednesday yall!! Offering up a free file from our educational series that we travel with to bring 3D printing in the educational space and to make fun things like this more accessible.
Also, for paid Patrons, we have a drop this weekend, and it kicks off our Halloween/Horror months. This is always the best time of year for some fun Halloween/Horror themed prints. We have a fund sculpture/mini coming out this weekend, so, if you are still thinking about joining the paid tier, now ...
2025-08-06 19:07:33 +0000 UTC
View Post
Howdy yall,
I hope you are doing great and enjoying the summer. We have some more fun art in this drop, I am almost halfway through my backlog of requests :)
We have 2 candy sculpts in this drop, with various options. For the gummy bear, you have a version that can be used as drawstring stoppers for jackets and sweaters, there is also a normal standing/sitting one, and a magnet version. For the sour patch kids, there is a keychain version, magnet, larger standing one, and one tha...
2025-07-28 16:47:53 +0000 UTC
View Post
Merry Friday yall- A few have asked for a Tauntaun skull so I thought it would be a fun free one to do. Free link below, commercial use for paid Patrons.
We do have a fun drop this weekend that will include to cute sculpts :)
Skull: https://makerworld.com/en/models/1637145-tauntaun-skull#profileId-1729543
2025-07-25 16:02:59 +0000 UTC
View Post
Hello everyone,
Happy Free File Wednesday.
This is a file from our pocket pet series, we do a couple a month, so I thought it would be nice for those who have not fully joined to see some of the little critters we are making. This is for personal use only, unless you are a paying Patreon member.
Hope you enjoy this fun one. HAPPY PRINTING.
FILE HERE:
2025-07-16 20:27:27 +0000 UTC
View Post
How are all my wonderful 3D printers doing?! This one is MF DOOM and Wu-Tang heavy as I have been getting a lot of requests for those. Plus, Wu fit in well since they were just here in my home town. There area few options to some of these prints for necklaces or key chains.
Xeno Yoshi I did as one with the eggs, as well as a profile where Yoshi and the eggs are separate.
I also got some requests for Godzilla stuff so I made this semi-retro Godzilla planter. I will be working on a...
2025-07-12 21:13:03 +0000 UTC
View Post
Hey guys,
Our newest drop will be tomorrow, got a lot of fun stuff for you. As you know, the Amazon prime deals are going on now, but make sure you check out Amazon Haul. A lot of great filament that is already on sale but at checkout you get an additional 40% off. On top of that, several of them have an additional 10% off. In the screen shot above, just make sure you search for the 1kg one to make sure you are getting the right ones. The link below will take you to the PLA deals. They ...
2025-07-11 16:19:14 +0000 UTC
View Post
Howdy yall! Here is another fun drop with 14 total files. I know the Labubu train has been going on a while ago but I had a flood of requests to get through before I got to most of them.
My whole family was pretty horrified by the buff Thomas, so apologize for any nightmares I cause yall ;)
For any of the keychain versions, just make sure you switch the infill to 100%.
For the Dragon Pocket Pets, I love them larger size but I included a mini file as well. I took 30 of the l...
2025-06-27 19:08:58 +0000 UTC
View Post
Hey yall, just in case you have not seen, Bambu is having their 3rd year anniversary sale. There are a lot of good deals over the next few weeks so check them out.
We have a fun drop this Friday with a Dragon Pocket Pet as well as the giveaway announcement. If you are on the fence about joining the paid side of the Patreon, now is a great time to do it :)
See yall Friday, have a wonderful rest of the week.
2025-06-24 21:35:14 +0000 UTC
View Post
Howdy yall! Hope you have been great, here is the most recent drop! Some of these do not look as great because I had to test print some of them on some older unstable shelving while I re-arrange our studio. Also, sorry the Kodama planter is dirty, the kiddos kept playing with it :) I am working on a couple more with different expressions and with two colors, so more to come on that. For the bumper sticker type signs, you can use magnetic adhesive strips for cars. The one I have been using has...
2025-06-10 03:07:07 +0000 UTC
View Post
Hey yall, I am going to have to do the drop in a couple of days. Had to do some moving around in the studio and re-arrange some printers so I need to test print a couple more before posting the next drop. Appreciate your understanding.
Have no fears, it is coming soon. I will also announce another giveaway.
I hop you guys are having good weather wherever you are.
2025-06-09 05:33:56 +0000 UTC
View Post
Hello all, happy Friday!! Here are a couple of new Father's Day prints for yall. I added them to the Father's Day collection HERE: https://makerworld.com/en/collections/1367348-father-s-day Hope you like them.
For the paid Patrons, we have another drop this weekend with some fun new ones and special requests.
Have a wonderful weekend, and happy printing.
2025-06-06 22:34:40 +0000 UTC
View Post
Hello all,
Here is our latest drop, got a new pocket and a new ducky, as well as our usual stuff. Nevermind the dino pic, these dinos were my first test print without the adjusted outter wall speed, but my little kiddos snagged the correct test prints and gave them away at school, lol, the file in the drive folder is the correct one though :)
Side note to the pocket pet series. I have actually got a lot of request for non-articulating minis which is what started this. Then the chi...
2025-05-25 21:34:00 +0000 UTC
View Post
Hello,
This post is for all to enjoy. We have 2 free files, the pool noodle one comes with a free commercial license too. The Alien is personal use only.
Any download/boost benefit I receive for the pool noodle model will go to purchasing filament or parts for the printers we donated to the children's hospital.
If you are guest member we would love to have you join the paid tier, we do a lot of fun drops every couple of weeks. We aim for about 20 files a month give or take.<...
2025-05-23 17:00:56 +0000 UTC
View Post
Hello guys,
I wanted to address something real quick. I have gotten a lot of weird requests here on Patreon, some for commissions, and some for our monthly drops. While I enjoy some weird and twisted humor, there are some things that I do not promote whether in humor or in my 3D prints. I have gotten several requests to do P. Diddy prints. While I get that it is in jest, I personally am not comfortable nor do I think it is right promoting anything that is exploitive of another human bei...
2025-05-22 23:40:39 +0000 UTC
View Post
Hello all,
This is a public post for all followers as we are offering a free file on MakerWorld. This is V1 of the skull, and is for personal use only unless you are a paid member. Thought it would be a good addition along with our Baby Xenomoprh for this months drop.
Hope everyone is doing great! Happy printing yall!!
https://makerworld.com/en/models/1411041-xenomo...
2025-05-15 21:09:57 +0000 UTC
View Post
Happy Monday yall. The Baby Xenomorph pocket pet is here! We debuted it at our show last weekend and it was a huge hit. I of course had to blow it up H2D size for a fun display piece. There are a few plates and options available depending on your preferences. Hope yall enjoy!!
2025-05-12 17:37:37 +0000 UTC
View Post
Howdy yall,
Here is a new display print we have been using for shows. It is nice and modular, and they fit together for easy storage. If you would like this, the file is below.
Have a great week!
https://makerworld.com/en/models/1387366-modular-display-set#profileId-1437040
2025-05-05 16:40:37 +0000 UTC
View Post
