Adorable Flexi Tiger (March Design) (Archived)
Added 2023-03-24 16:59:47 +0000 UTCUpdate - 30-03-2023
Fixed Tiger head looking at the ground
Added front feet curves (Now sit more easily)
Download
_____________________________________
Hello Everyone,
I am super happy to introduce you to our latest design, the Adorable Flexi Tiger. It's a print-in-place model and does not require any support structure. Below are some recommended settings for printing:
- Use 4 bottom layers and 8 top layers.
- I recommend a minimum of 3 wall counts.
- Ensure good bed adhesion by using a Brim or Rafts.
- Set your speed to 60mm/sec and adjust as necessary for your printer.
You will get the Below files
1. Artflex_Adorable_Flexi_Tiger.stl
2. Artflex_Adorable_Flexi_Tiger_PrePainted.3mf
I hope you will enjoy printing this design.
If you could share your printed images on social media, it would really help me grow and continue with this hobby😇. Thank you!
Happy printing!
Comments
Sent a video on IG, will upload this on Patreon page as well to demonstrate Head lock with body pattern
2023-03-28 11:19:01 +0000 UTCCan you please ping me on Instagram
2023-03-28 11:13:36 +0000 UTCI just printed one of these and it's very head heavy. Keeps looking at the ground.
R&D 3D Printing
2023-03-28 11:08:39 +0000 UTCAww we do not yet! Looking at the prusa xl but not sure yet which way to go
Laying Layers
2023-03-26 18:30:29 +0000 UTCLooking forward to see it printed, if you have X1 carbon please print it in multi material 😁
2023-03-26 17:59:23 +0000 UTCOMG so cute, if only a printer was free!!!!
Laying Layers
2023-03-25 18:28:34 +0000 UTCLatest files added with teeth
2023-03-25 13:55:06 +0000 UTCHe was looking more Adorable to me without teeths so i took the artistic call, I will add one version with teeth asap 🤟
2023-03-25 11:54:08 +0000 UTCGlad you like him, looking forward for your print 🥰
2023-03-25 06:53:30 +0000 UTCThe shared one doesn't have teeth?
Roberto Mello
2023-03-25 00:19:19 +0000 UTC
