Hello Everyone!
I hope you are doing great I am super excited to share the Sneak Peek of upcoming design! The Flexi Mouse!
I hope you will love printing it!
For free members considering joining the ArtFlex Membership, it's worth noting that today is the final day to access the October designs before they are archived 😉
Happy 3D Printing!
Hello Everyone,
I'd like to inform you that after taking a short break I am now back to work and I've just added the October bonus designs to the Bonus Pack post.
ArtFlex-Frankenstein-Bonus - KeyChain, Magnet, and Fidget-Pendant
ArtFlex-Clownette-Bonus - KeyChain and Magnet
To explore these trinkets, all you need to do is click the link provided below.
All the collections of these trinkets will be uploaded in the bonus pack post.
Magnet Siz...
Dear All,
I am delighted to inform you that I have thoroughly tested this design, and the joints are functioning pretty well. You are now all set to proceed with the printing. Additionally, I have included a pre-painted version, but feel free to customize the colors to suit your preferences.
On a time-sensitive note, I must urgently visit my hometown, which means I may not be able to address any queries for the next 3-4 days. I will be sure to provide an update as soon as I return...
2023-10-22 13:12:49 +0000 UTC View Post
Hello Everyone!
Sneak Peek of our upcoming Design!
I hope you will love this 😁
Greetings, everyone!
Let me introduce the New design, The Flexi Zombie Carrot Key Chain!
A little free treat from ArtFlex for Everyone!
I hope you will enjoy printing this design 😄
To ensure the best results, please follow these suggested settings:
Happy 3D printing!
Warm regards,
ArtFlex<...
Greetings Everyone!
Get ready to hit your slice button and bring this cute Little Clownette to life! This design features a unique snapping joint system that allows you to adjust the model's stiffness and flexibility.
I've provided two versions for your convenience:
1. Clownette-Free-Joints
2. Clownette-Snap-Joints
If your printer tends to have over-extrusion issues, I recommend using Free-Joints.stl file, However, I must say that snapping joints add a lot of fun to t...
Hello everyone,
I am super duper excited to share a sneak peek of our upcoming design, "The Clown Girl!" This one has undergone extensive joint testing and is currently on the print bed for the final version. It will be available soon for all of you. Stay tuned!
Happy 3D printing!
2023-10-11 13:33:44 +0000 UTC View Post
Greetings, everyone!
Allow me to introduce the new design, Flexi Broccolis! (I'm not sure if this counts as a Halloween design, but it's certainly fun!) I've also added a keychain version,
I hope you'll enjoy printing it!
To ensure the best results, please follow these suggested settings:
Happy 3D printi...
2023-10-06 18:09:21 +0000 UTC View Post
Greetings, Everyone!
Allow me to introduce the Halloween Little Candy Corns - these delightful and quick-to-print flexi fellas come to life in just 40 minutes when printed at 75% scale using Speedy printers. You'll be pleased to know that you can fit 30 copies of these charming creations on a 256x256 build plate at 75% scale, making them a perfect addition to your Halloween festivities.
To ensure the best results, please follow these suggested settings:
Greetings, Everyone!
I'm thrilled to introduce Halloween Little Pumpkins, these adorable creations that are perfect for production, as they can be easily downscaled to 75%. You can print up to 32 copies at once on a Bambu plate (256x256) at 75% scale.
45 min print (Single Copy) with Bambu Lab Printer using 0.16 mm Default Optimal Profile at Original Scale.
I hope you find joy in bringing these little pumpkins to life through 3D printing.
Here are the suggested settings fo...
2023-10-02 19:45:28 +0000 UTC View Post
Hello Everyone,
I'd like to inform you that I've just added the September bonus designs to the Bonus Pack post. To explore these trinkets, all you need to do is click on the link provided below.
All the collections of these trinkets will be uploaded in the bonus pack post.
Magnet Size - 10x3mm
- 0.16mm layer height
- 3 walls with a 0.4mm
- 12% Infills (Gyroid)
- Use brim or raft for better print adhesion
- Do not Downscale magnets to avoid fitting issue
<...
Greetings everyone!
I hope you are doing great. Allow me to introduce our new Halloween design: The Flexi Cyclops Bat. This bat can flap its wings with the help of rubber bands and can stand on its legs with a bit of balancing. Additionally, it can serve as a fidget toy, as its eyeball rotates freely in its socket.
When downscaling this design, please ensure that you maintain a minimum of 3 walls on the joints.
In the last image, please don't forget to follow the instructions ...
Greetings, everyone!
I hope you're all doing fantastic and buzzing with excitement because Halloween is just around the corner! Get ready to be thrilled as I share a sneak peek of our spine-tingling Halloween theme design, "The Bat-Cyclops"! Brace yourselves because it's going to be a hauntingly good time. Stay tuned; the design will be unleashed very soon!
Happy 3D printing! 🎃👻
2023-09-22 18:19:16 +0000 UTC View Post
Greetings Everyone,
Introducing the utterly charming and delightfully flexible Kitty Cat! This adorable little companion is all set to grace your print bed.
As usual, I have added pre-painted 3MF files for your convenience.
Please don't get confused by two kitty heads, as the name suggests below Are there workings
Hello Everyone,
I hope this message finds you in high spirits. I'm delighted to share a sneak peek of our upcoming September design!
Soon, it'll be ready to bring to life on your print bed. Stay tuned!
Happy 3D Printing!
2023-09-09 20:26:04 +0000 UTC View Post
Hello Everyone!
I am super excited to share this Articulated Flexi Bat that flaps its wings with the help of a rubber band. It hangs from a wire through its twisted feet and can stand on its feet and tail with a bit of balancing.
Please use the 'Rubber-Band-Insert' STL file to pass the rubber band through the holes on the back side of the wings. Alternatively, you can use some wire to insert the rubber band through the holes.
As usual, I have prepared a pre-painted file as well...
2023-09-04 19:39:56 +0000 UTC View Post
The haunting season is approaching, and thus, it's time to unveil a sneak peek of our forthcoming design. 🦇👻🎃
By the way, the August designs will soon be archived. If you're planning to join, it's still not too late – join today to get your hands on the welcome pack, August designs + July's last sold design!
Happy 3D Printing!
Hello Everyone,
I'd like to inform you that I've just added the August bonus designs to the Bonus Pack post. To explore these trinkets, all you need to do is click on the link provided below.
All the future collections of these trinkets will be uploaded in the bonus pack post.
Magnet Size - 10x3mm
- 0.16mm layer height
- 3 walls with a 0.4mm
- 12% Infills (Gyroid)
- Use brim or raft for better print adhesion
- Do not Downscale magnets to avoid fitting issue...
Hello Wonderful Patreons,
I am absolutely thrilled to unveil our latest masterpiece, the delightful Flexi Fox, to all of you! As always, I've taken the liberty of creating a pre-painted version for your utmost convenience. However, don't hesitate to let your creativity shine by switching up the colors.
Now, let's dive into some printing magic:
Greetings Everyone!
I hope you are doing great
I am happy to Introduce the updated version of this classic figure, now featuring enhanced joints for increased durability and a slightly reduced length. This revamped design will be available exclusively on our Patreon page for a limited time of one week from the date of this post.
Attention to all ArtFlex Patreon followers! Make sure to join our Patreon community 😀 and secure your copy of this design while you can! 2023-08-18 07:13:11 +0000 UTC View Post
Hello Everyone!
I am super happy to share the upcoming design Sneak Peek, I hope you will like this Cute Little Fox!
Happy 3D printing!
Greetings Everyone,
I trust you're all doing wonderfully!
I'm thrilled to introduce our latest creation, the Flexi Parasaurolophus! I'm sincerely hoping that this design brings smiles to each and every one of you. To make things convenient, I prepared a pre-painted version for you. However, please feel free to personalize the colors of your choice, as this design has been AMS optimized.
Printing Tips:
Our next design is coming soon, so stay tuned! By the way, can you guess which dinosaur this is 🦕
2023-08-13 19:06:11 +0000 UTC View PostDear all,
I would like to inform you that I have made some updates to the membership description to include the recent addition of the welcome pack. The information provided is now more specific about the benefits subscribers will receive upon joining.
Please note that the Non-commercial $5.50 tier has been discontinued. However, existing subscribers can continue to enjoy the benefits as long as they maintain their subscription. If you decide to exit this tier, please be aware tha...
2023-08-06 12:31:39 +0000 UTC View Post
Dear All,
I hope you are doing great!
I am delighted to share with you this charming and adorable Flexi Alpaca design. The modeling and printing process for this project were both enjoyable.
For your convenience, I have prepared a pre-painted version. However, you are welcome to personalize the colors according to your preferences as this design is AMS optimized.
I am confident that you will find this design enjoyable. Your continuous support is highly appreciated.<...
2023-08-05 09:22:47 +0000 UTC View Post
Greetings Everyone,
Here is our new design Sneak Peek :)
This will be available soon.
Happy 3D printing
Hello everyone!
I am delighted to present our newest creation, the lovable Flexi Tortoise! This charming little creature is sure to bring joy to anyone who encounters its adorable face.
In addition, I have prepared a pre-painted version for AMS. However, feel free to customize the colors to your liking, as this design is AMS optimized, ensuring a smooth painting experience.
The model requires no supports, simplifying the printing process significantly. For optimal results, w...
2023-07-29 17:45:22 +0000 UTC View PostDear valued members,
I hope this message finds you all in good spirits.
I wanted to take a moment to inform you about a recently launched feature from Patreon, which allows people to join our community for free. We are delighted to offer this option to stay connected and engaged with ArtFlex.
However, it's essential to clarify some important points, especially for our free members:
Hello everyone,
I hope you are all doing great. I am super happy to share our new design, "The Articulated Turkey," with all of you. I made some artistic changes from the last sneak peek of this design!
Basic instructions are provided below:
