Really Annoying Gift Box Ver. 3.0!
Added 2024-11-09 07:53:26 +0000 UTCHey everyone!
We have yet another upgrade to the Really Annoying Gift Box! This update adds another couple of layers and quite a few more bolts. This gives us a grand total of 666 bolts you need to remove to get to the gift inside!
As with the last upgrade, the hardware is all the same. There are just new layers to add to the outside and a bunch more bolts to keep it together.
There are quite a few different ways you can print this design at this point. You can print the original with just the first couple of layers and 134 bolts. If you have a bigger gift you can print some of the outer layers while omitting the inner ones to have anywhere from 134 to 162 to 296 to 370 to 532 to the full 666 bolts!
I have included the measurements for available gift space in the different boxes in the Print Instructions. You can find the STL's in the zip folder below and in the Archives!
As always, I hope you enjoy the model and I hope anyone you may print this for hates it!
Jacob
Comments
Where do you use the 5mm or 6mm bolt? Not sure which one to use and where. Thanks
Attila
2025-05-30 22:22:58 +0000 UTCAbsolutely love this, but now I have to screw 666 screws to execute this prank lol
Ben Morse
2025-03-08 22:40:06 +0000 UTCYou maaaay be referring to one of the sides of Box 6? I messed up when uploaded the file, it isn't supposed to import on its side like that. It should print with the open side face up, but there should be no supports needed at all
ThinAir3D
2024-12-20 12:55:12 +0000 UTCPeople on a Facebook group online mentioned it's to much overhang which caused the issue. They mentioned needing supports. Or a couple mentioned trying to print with it on its side.
Joshua Foster
2024-12-20 03:40:45 +0000 UTCHas anyone had an issue printing the larger box. The Bambu PLA that I used is all stringy on the underside of the top of the box. Didn't know if anyone had a suggestion on what could have happened.
Joshua Foster
2024-12-20 03:06:17 +0000 UTCI didn't change anything in my bambu studio for my A1 and it printed great
Tim Mills
2024-12-18 18:37:49 +0000 UTCNew to this but do you need to change any settings when you upload to bambu lab studio? Or will each file have the default settings used to create them? Like infill and wall perimeter?
Joshua Foster
2024-12-16 17:41:41 +0000 UTCI've been in the habit of making yearly upgrades to this design, so that will likely be where we take it next year. I agree though, not sure if we need more than that, haha
ThinAir3D
2024-12-15 20:13:45 +0000 UTCSorry about that. I just re-uploaded the .zip on this post and it has it in it now!
ThinAir3D
2024-12-15 20:13:18 +0000 UTCYou should be able to duplicate them once they're in the slicer. I haven't used Cura in a loooooong time but there might also be an option to "Fill bed with instances"
ThinAir3D
2024-12-15 20:13:05 +0000 UTCSo when are we going to get to the 1000 bolt mark? I feel like if you make it there that would be the best spot to stop imo.
Benjamin Mellott
2024-12-13 23:33:11 +0000 UTCWent to print the files and was missing the really_annoying_ribbon. Is there another place to find?
Tyler Steck
2024-12-13 14:04:25 +0000 UTCanyone got an easier way to print the 666 screws without putting them in Cura 1 at a time? lol
You mad bro 1776
2024-12-10 22:48:38 +0000 UTCThere’s no difference. I’m not sure why I uploaded them like that to begin with, something I need to fix!
ThinAir3D
2024-12-06 21:33:44 +0000 UTCHi, is there any difference in box_5b and box_5A? I am printing 3 complete sets of boxes and I printed three Box_5 but I don't know if they are the "a" or "b" box. If a and b are different, how do I tell them apart?
Dan Falla
2024-12-06 20:40:20 +0000 UTCI used a A1 and it works fine.
Dan Falla
2024-12-06 20:39:15 +0000 UTCSounds good! Yeah I printed the biggest box, both a and b, so once you get one out I’ll try one or the other and let you know!
Steven Johnson
2024-12-04 02:53:53 +0000 UTCI'm gonna work on opening up some more space so they can slide even easier. I've had one or two that were a little tight off the printers. I've got a couple minor fixes for the boxes overall that i'm trying to get out tonight. One tried and true method to get stuff like that to fit together well (if you wanted to get it fixed in the meantime) is to print one of the pieces after you adjust your X-Y Contour Compensation to -0.10! I'll make sure and post as soon as I get these updates done!
ThinAir3D
2024-12-03 22:55:46 +0000 UTCA little over 2 kgs printed on my Bambu X1C or P1S!
ThinAir3D
2024-12-03 22:53:29 +0000 UTCWhen I printed the biggest box, the two pieces had a VERY hard time sliding together and almost impossible to get back apart. Any tips?
Steven Johnson
2024-12-03 20:05:19 +0000 UTCabout how much filament does this require with the recommended settings?
Bradley Miller
2024-11-30 18:33:40 +0000 UTCIm looking forward to starting it. What 3D printer did you use to print?
Joshua Foster
2024-11-29 23:21:02 +0000 UTCIve found that its about 3 days worth of straight printing for everything, hope this helps!
Bryan Schaeffer
2024-11-29 23:08:00 +0000 UTCWhats the total print time for this? And what 3D printer are people using to print it
Joshua Foster
2024-11-29 03:17:03 +0000 UTCWish me luck! Attempting box two and three screws about 220 all at once 🤞
RabidDrubix
2024-11-24 14:36:26 +0000 UTCYep it'll still work just fine!
ThinAir3D
2024-11-20 21:05:00 +0000 UTCI've always been curious. if I blow this whole design up to say 200 or 300% will it still work?
AdditiveWizard
2024-11-17 18:30:20 +0000 UTCCurrently printing now. I try to find ways to gift annoying packaging to my dad every Christmas and I am pretty sure this will be the cherry on top! Great design and super easy printing!
Samantha Taylor
2024-11-14 14:52:04 +0000 UTCThank you, if it’s ok I might message again if I struggle lol. Also love the design gonna give it to one of my co workers
Ash
2024-11-12 19:30:47 +0000 UTCPretty simple assembly. Once everything is printed, insert all of the previous box pieces into Box_6a. Then insert all of that into Box_6b. Then you want to insert bolts into all of the holes. Then you'll add the Box_6_collars, then lids. Bolt the lids on and you are all done!
ThinAir3D
2024-11-12 19:26:22 +0000 UTCThank you it will help me lol. Currently slowly printing everything
Ash
2024-11-12 19:23:53 +0000 UTCNot at the moment, but i'm going to be filming an assembly video guide this week! I'll make sure and post it here in the Patreon
ThinAir3D
2024-11-12 19:22:58 +0000 UTCActually could have fit a few more, i'm sure you'll notice while printing. So yes, it was very intentful. Hahaha
ThinAir3D
2024-11-12 19:22:37 +0000 UTCNo supports needed!
ThinAir3D
2024-11-12 19:22:09 +0000 UTCdo you have a guide on how to construct from box 2 to box 3
Ash
2024-11-12 13:29:38 +0000 UTCHi there, I sent you a message
ThinAir3D
2024-11-11 13:07:56 +0000 UTCNeed i support on dis ?
Fredrik Isdal
2024-11-11 01:12:21 +0000 UTCCan i get fils to dis box
Fredrik Isdal
2024-11-11 00:44:20 +0000 UTCAnd finishing with 666 is clearly the intent to be evil! I love it!
Tim Meers
2024-11-09 13:02:12 +0000 UTCJust got back to ya!
ThinAir3D
2024-11-09 08:31:53 +0000 UTCHey! Can you check your messages please :)
Max Wojcik
2024-11-09 07:57:29 +0000 UTC
