New Bolt Variatons for Annoying Boxes!
Added 2023-11-05 01:10:40 +0000 UTCHey everyone!
This has been very highly requested and a long time coming but I went ahead and created a few new variations of bolts for the Annoying Boxes!
We now have the flat head, phillips head, 5.5 mm hex, 6 mm hex, and a special one I made up (some people have said its a snake eye bolt?). As you can see, I also created corresponding tools for these bolts. The hex bolts are extra shallow to make them extra annoying.
These bolts all work with the Annoying Gift Box, the Really Annoying Gift Box, and the Annoying Valentines Box!
I have attached all of these new bolt variations below, but you can also find them in the Archives along with both the Annoying Box and Really Annoying Gift Card Box.
As always, thank you all very much for the support and I hope you enjoy these models!
- Jacob
Comments
This would be fantastic
Zachary Remian
2024-11-04 01:03:00 +0000 UTCI made several of these for XMAS. ALL OF THEM struggled with the hex ones. The sizes are a bit to close, and the bolts ended up stripping. I wonder if the size difference can be made more significant, and if maybe a deaper socket, would help avoid stripping. The rest of the bolt heads worked out well.
Gregg Adventure
2024-01-01 22:04:35 +0000 UTCI printed some of the alternate bolts since my daughter knows the trick to open it but her boyfriend does not…he needs both of their wrenches to open it and she needs both those wrenches and the other wrenches I hid in his box too!
Laura Harrison Allen
2023-12-24 00:51:03 +0000 UTCAh, here it is. Thank you.
Gregg Adventure
2023-12-23 14:57:15 +0000 UTCWould love "tools" that fit in an electric screwdriver for the non phillips/flathead bolts..
Stacey Levine
2023-11-26 21:31:52 +0000 UTCI'll see if I can make up some new bows, although there was a bit of limited space underneath it for the original so i'm not 100% sure if it will be able to fit! I'll try and keep you posted!
ThinAir3D
2023-11-16 17:44:23 +0000 UTCSince there are new phillips screws, can we get a new bow to fit the phillips screw driver?
Brandon Cramer
2023-11-13 04:19:04 +0000 UTCYes, i'll definitely add that to my list and see if I can get them to you guys sooner rather than later!
ThinAir3D
2023-11-10 18:25:57 +0000 UTCAny chance of getting the longer bolt variations to also work with the bank?
Domonic Gaccetta
2023-11-09 19:13:40 +0000 UTC
