April Monthly Release - Angels & Demons
Added 2023-04-03 11:13:24 +0000 UTCHello everyone!
Here is the April release! And this post is going to be much shorter than usual, since due to special circumstances I made a detailed and long explanation of the set in the preview post. So let's just take a look at what it includes. Again we have the focus on characters: Angels and Demons!
And apart from these two large groups we have two models that are somewhat more difficult to classify. The first is up to your choice where to side it, and what weapon it is wielding. The second one is a discard of the first ideas for the set, but since it was already complete there was no point in not sharing it with you!
And we go directly to the discount code for this month. With this code you will have a 60% discount on all past Monthly Releases available in our MyMiniFactory store.
C5N12_APR
And that's all! Although it has had its problems I think this set will provide good situations on the table. I'll be back in a few days with the reveal of that it's coming in May. Have fun!
Comments
The emails were sent, although with some delay, but you should have received it already. I can't check it for a few hours, but I will asap
Carlos Montero
2023-05-29 08:32:36 +0000 UTCStill waiting on the email from MMF, is it just me? 🤔
Captain Feathersword
2023-05-28 22:23:22 +0000 UTCNo! This was not normal. The files have been delayed due to a mistake. Throughout today you should start receiving emails to redeem them.
Carlos Montero
2023-05-20 08:51:56 +0000 UTCI'm in the same boat, was too busy to remember to grab the files last month! Normally the link comes through in the first week of the month 🤔
Captain Feathersword
2023-05-14 19:03:21 +0000 UTCHi. I havnt receveid any link on MMF for the April release. Is this normal? thanks :)
Christophe Kenny
2023-05-13 14:48:11 +0000 UTCYou can also download the "miniature scaler" on Thingiverse by Yoolis, something I use frequently. Just remember to "hide" it or remove it before you slice the file. https://www.thingiverse.com/thing:3649454
Sean
2023-04-26 09:46:30 +0000 UTCI always try to give them a similar scale to Arcadia Quest-like minis, which is indeed something around 32mm scale, but that's not always the case. So, mostly you can just import them into your slicer and print (after positioning, supporting, etc...). But if you want to be 100% sure that it will fit your taste or need, create a 32mm size model, or the file of a mini that you already like, and use it to compare and make adjustments.
Carlos Montero
2023-04-25 16:39:39 +0000 UTCnewbie here! curious, if i just send these files to a printer will they be 32mm scale or thereabouts? or will i have to size the models specifically before printing them? thx!
Jeremiah Dogsbreath
2023-04-23 19:12:18 +0000 UTCEstoy feliz de saber que los youkai japoneses serán un tema en el futuro, he estado esperando algo como esto desde que comencé a suscribirme a Patreon (¿podemos dar sugerencias sobre algunos youkai que queremos ver cuando hagas este tema? ?). También me encantaría ver algo como Heman y MOTU (esperemos que se basen en los dibujos animados antiguos, o incluso nuevos, de Netflix, porque los diseños de los personajes de Netflix también resultaron geniales). Solo espero que no esté basado en el nuevo dibujo de She-ha (en serio... ¿qué es eso?). Los temas de ficción cientifica no son mis favoritos, pero tus modelos siempre son fantásticos. ¿Tienes la intención de inspirarte también en las películas clásicas? más allá de la inspiración en Doom?
Luiza Tavares
2023-04-11 15:23:35 +0000 UTCI was going to wait a bit, until I had minis to show, to clarify this. But before there is any confusion, let's talk about it. Indeed the problem with this month has made to change the plans. Next month will be sci-fi (not only demons), as I promised a break from medieval fantasy. After that, we'll have to discuss about the release order, but Japanese monsters and MOTU are planned along with others. There will be fewer polls, but I will try to provide additional material to compensate the Executives.
Carlos Montero
2023-04-11 07:42:48 +0000 UTCseria bastante injusto una nueva encuesta cuando . la parte scifi/DOOM de la encuesta anterior no se ha liberado y solo se ha dado medieval
Joseph Plissken
2023-04-10 19:20:37 +0000 UTCEspero que abra una nueva encuesta! Quiero a Heman y MOTU al estilo SK!
Juan Francisco Fernandez
2023-04-09 22:43:16 +0000 UTC¿Cómo será el tema del próximo mes? vas a seguir con el tema oriental, con ninjas y youkais? ¿O te quedarás con los demonios inspirados en Doom?
Luiza Tavares
2023-04-08 18:55:04 +0000 UTCLove it !!
Goegebeur d'hondt
2023-04-03 22:25:13 +0000 UTCAn amazing meltdown... very sad of how this month turned in another medieval month. But at least the Doom demon is usable and hellboy could be adapted with sci-fi weapon. The models are great as always , but for me it's too much medieval content. Samurais was at least something different. and with this set i had high hopes to see something usable at least in different thematic than medieval. If i would have known i would have voted another theme just to don't have another Medieval set.
Joseph Plissken
2023-04-03 18:49:32 +0000 UTCTha ks very much maestro
Guillaume Bellanger
2023-04-03 15:22:21 +0000 UTCThe height of that model is 50 mm approx. horns included. It is, by default, at a scale similar to most arcade quest models. Even if, say, you remove the horns...
Carlos Montero
2023-04-03 13:37:34 +0000 UTCTo be on scale of acradia stuff what is the size of hell boy plz?
Guillaume Bellanger
2023-04-03 13:15:00 +0000 UTCThe new version models are perfect. Exactly what I was hoping for.
Jeffrey Barnes
2023-04-03 12:56:48 +0000 UTCThese are awesome my dude! 🤘
Hélder De Jesus
2023-04-03 11:18:53 +0000 UTCAwesome addition! Can’t wait to see what’s in store for May.
Damon Rice
2023-04-03 11:16:35 +0000 UTC
