Battle for the Unseelie Courts!
Added 2021-11-02 02:06:00 +0000 UTCHello Fellow Trappers!
Here's this months release, Battle for the Unseelie Courts!
This months throwback models are the Indigo Fae Dragon from the March 2020 release, the Cave Hydra from the September 2020 set, and the Owl Griffin from the November 2020 set!
We will be sending out MyMiniFactory invitations to redeem this release over the next couple of days and on every Friday this month (the 5th, 12th, 19th, and 26th) and again after the month is over! If you joined at some point in between these dates or wish to start downloading right away, we have provided a My Air Bridge link for immediate download.
Enjoy this adventurous Feywild set! We can't wait to see how creative everyone gets with it!
Monthly Release Link:
*No Longer Available* December's release is on its way! The last round of MyMiniFactory invites for November's set will be sent out by December 2nd.
Welcome Pack Link:
Yearly Membership:
A reminder to everyone, when you switch to a yearly subscription, you get 16% off (2 months free) and you'll unlock all of the loyalty models we have released! Additionally, you are not double charged for the same month when you switch, you are charged for the year up front but the yearly subscription will begin the following month!
Join our Facebook group here:
https://www.facebook.com/groups/dragontrapperslodge
And join our Discord Server here:
FAQ:
https://docs.google.com/document/d/1P6VZbLUGp3m1zekmVsJ1zdGldaaEUPqMETCUJfNUqQk/edit?usp=sharing
May Your Blades Stay Sharp and Your Flesh on Your Bones!
Comments
Hey Cody, all models were sent out through MyMiniFactory as well.
The Dragon Trappers Lodge
2021-12-03 18:18:27 +0000 UTCHey i actually signed up in November for this pack ,was traveling and only got back today, i was never able to download it, anything i can do?
Cody McMillan
2021-12-02 17:18:42 +0000 UTCFirst month for me, your models look great.
Peter
2021-12-01 03:51:30 +0000 UTCBoth are available through the link above. We're updating that file containing the fairies currently. It'll be back up shortly.
The Dragon Trappers Lodge
2021-11-30 02:30:22 +0000 UTCSome of the models appear to be missing from the download. The modular Faeries nor the Dryan appear to be missing?
Darren Williams
2021-11-29 23:44:10 +0000 UTCI joined here just for the Fairies because they remind me of MTG's Lorwyn block so much. I hope I can get them to print correctly!
Erik
2021-11-29 12:56:38 +0000 UTCUnderstood. We can't upload the full figures as we don't have them whole. In order to create renders, we assembled the unsupported pieces. In the future, we'll do things differently to make it easier for everyone.
The Dragon Trappers Lodge
2021-11-24 00:28:33 +0000 UTCThis is a good question for the #help-and-support channel on Discord. We test print all of our models to ensure it all prints well. If you're having any trouble, there's a lot of people who can help on that channel.
The Dragon Trappers Lodge
2021-11-24 00:23:40 +0000 UTCDid someone have problems printing this month's models? There were many failing and when imported into lychees, it showed a lot of islands on the pre-supported stls.
2021-11-16 07:45:58 +0000 UTCAny chance you could upload the full files for the modular fauns & faeries as shown in the renders? Some of these hands and weapons are really tiny and difficult to assemble after printing
Court (enza.cos.props)
2021-11-14 17:06:54 +0000 UTCI love all of these so much. Is there any chance that going forward we could have one or two SFW models in the modular sets? I host stuff for kids and church groups and want to include some of these but its against the rules for where i host.
2021-11-14 03:20:32 +0000 UTCIt's currently getting cut and we're making an assembly guide because there are so many pieces. It will also be test printed soon. After everything is successful, we'll get it delivered!
The Dragon Trappers Lodge
2021-11-10 20:18:33 +0000 UTCIt should fit but it may have slipped by on sizing. We test print on larger 3D printers now but scale everything for the mini. If you do scale it down by about 10% or less the supports should still work.
The Dragon Trappers Lodge
2021-11-10 20:15:29 +0000 UTCThis is a great question to put in the #help-and-support channel on our Discord server! You can join using the link above!
The Dragon Trappers Lodge
2021-11-10 20:09:56 +0000 UTCSome of our models this month were rather large and we're working on preventing that in the future. We did decimate but not quite enough it seems.
The Dragon Trappers Lodge
2021-11-10 20:06:46 +0000 UTCIβm wondering if there has been any development on the skyback lodge?
DreadPirateLynx
2021-11-10 19:10:55 +0000 UTCDo you guys still test print on phrozen 4K minis? I noticed that the supported dryagon is larger than the build volume on mine. I can scale it down and support it myself, but I was hoping to print it at the intended size :(
Austen Weitzel
2021-11-09 21:13:31 +0000 UTCHeads up: the presupported Seelie Queen upper half failed to print twice on my Mono X sliced with Chitubox. Both times the model was on the built plate in Chitubox and other minis printed, the first time including the lower half of the Queen. The lower part of the supports was on the built plate, but the totality of the support colums turned to flat planes mush on my FEP :( After the second time I even have resin on my screen (/the light filter on my screen? The internet tells me it should be "just" a light filter foil damaged). If anyone has experience with the spoiled screen and potential replacement, please write me.
Gunter Schmidt
2021-11-09 13:56:29 +0000 UTCThis is an amazing release, and the models are top notch! One query - did you possibly forget to decimate some of the models? Some of these files are absolutely enormous!
Steven Crawford
2021-11-08 18:36:22 +0000 UTCFirst month for me, your minis are GREAT ! I love the concept, thank you so much for your work.
David Bernadet
2021-11-04 22:49:48 +0000 UTCWe currently don't recommend switching to Tribes for a few reasons. One of those reasons is that we have no way to track loyalty rewards. Other reasons include buggy features and a lack of features. It's a better overall customer experience to stick with Patreon for now. That is, until Tribes is improved and out of Beta.
The Dragon Trappers Lodge
2021-11-04 19:20:03 +0000 UTCWhich service is better for you as the provider Patreon or MMF and why? I'm willing to quite Patreon and subscribe to you via MMF Tribes if all my rewards transfer to it. I'm subscribed to many Patreon providers but none have stated a preference for themselves. This could help me help them as well as you. Thanks.
Ramiro Carrasco Jr.
2021-11-03 21:51:29 +0000 UTCTribes is a separate service akin to Patreon, so to clarify, if you have one you don't need the other or else you'll be double paying for the same set. As long as your MyMiniFactory account and Patreon account emails are the same, then you'll receive emails from MyMiniFactory to redeem this month's release (hasn't been sent through MMF quite yet but will soon!).
The Dragon Trappers Lodge
2021-11-02 16:40:04 +0000 UTCYes, throwbacks for this month will be added to the MyMiniFactory distribution.
The Dragon Trappers Lodge
2021-11-02 16:35:18 +0000 UTCHi, I joined the Lodge yesterday through the Patreon page. My question is, will that automatically transfer my info over to the Tribes on MMF? I can't wait to get these minis! Thanks for any help
2021-11-02 13:57:36 +0000 UTCAre the throwbacks added to our MMF as well or do we need to download them via MAB?
Richard Gibson
2021-11-02 13:18:35 +0000 UTCThat slipped it's way in there but is not part of the release! You'll learn more about that soon! ;)
The Dragon Trappers Lodge
2021-11-02 06:58:14 +0000 UTCso when do we get the turkey dragon? sorry saw it in the renders folder and had to ask...
Robert Kimball
2021-11-02 04:11:08 +0000 UTCFantastic work as always
The_ Hybred
2021-11-02 03:32:02 +0000 UTCOh strange! We'll fix that real quick! Thanks for letting us know!
The Dragon Trappers Lodge
2021-11-02 03:18:52 +0000 UTCThe Modular Fairies zip file somehow ended up under Renders, instead of STLs.
Shawn Polka
2021-11-02 02:56:29 +0000 UTC
