最新版は NalulunaModAssistant からダウンロードしてください。
NalulunaModAssistant
https://nalulululuna.fanbox.cc/posts/4732024
旧バージョン
新しい Beat Saber では動かないか、不具合が出ると思います。
NalulunaTrackingScore 0.0.4 for Beat Saber 1.25.1
NalulunaTrackingScore-0.0.4-bs1.25.1
NalulunaTrackingScore 0.0.2 for Beat Saber 1.24.1
NalulunaTrackingScore-0.0.2-bs1.24.1
- このmodは支援者様限定で公開しているため、modのファイルやダウンロードリンクを他の方に提供しないようお願いいたします
- modが映った画像や動画の公開は問題ありません
- This mod is available only to my supporters, so please do not provide the mod file or download link to anyone else
- No problem publishing images and videos showing this mod
0.0.4
- 表示桁数を Meta デバイス向けに調整
- HMDとコントローラーは末尾にH/L/Rの表示追加
- Oculus モード対応で細かい修正
0.0.3
- 表示レイヤー設定を追加
1. ModAssistant で BeatSaberMarkupLanguage をインストール
(mod環境が構築済みであれば、既に入っていると思います)
2. ダウンロードしたdllファイルを以下に移動*
C:\Program Files (x86)\Steam\steamapps\common\Beat Saber\Plugins
* 上記の記述は、Steam版Beat Saberのデフォルトインストール先の場合なので、
インストール先が異なる場合は適宜読み替えてください。
1. Install BeatSaberMarkupLanguage by ModAssistant
(If your mod environment is already set up, it's probably already in there.)
2. Move the downloaded dll file to the following location*
C:\Program Files (x86)\Steam\steamapps\common\Beat Saber\Plugins
* The above description is for the default installation of Beat Saber for Steam.
If your installation location is different, please change the description accordingly.
VR システムのトラッキング状況を表示する mod です。HMD やコントローラー、トラッカーが正常にトラッキングされているか、改善が必要かどうか確認できます。
A mod that shows the tracking status of the VR system, allowing you to see if the HMD, controllers, and trackers are working properly and if any improvements are needed.
左からトラッキングデバイスのシリアル No.、前回プレイした曲中でのトラッキング正常率、Beat Saber 起動時からトータルのトラッキング正常率、を表します。
並び順は上から、HMD(H)、コントローラー(LとR)、その他のトラッキングデバイス (VIVE トラッカーなど)、という分類で並び、同じ分類のもの同士では、デバイス認識時の位置の高い順になります。
移動を検知したデバイスはシリアル No. の左に * がつき、これでどのデバイスがどのシリアル No. に相当するか確認可能です。トラッキングをロストしたときは黄色で、1 秒以上ロストしているときは赤色で表示します。
正常率は トラッキング成功フレーム数 ÷ 総フレーム数 で計算しています。設定画面の [CLEAR SCORES] を押すと、正常率を初期状態に戻します。
目安としては、トータルのトラッキング正常率が、左右コントローラーで 99.9 以上、トラッカーで 99.5 以上でているのが望ましいと思います。良い環境の作り方について後述しています。
曲中でのトラッキング正常率は、動画撮影など行っているときに、前回のプレイ中にトラッキングロストが発生しなかったかの目安になります。
From left to right, it shows the serial number of the tracking device, the tracking success rate during the last song played, and the total tracking success rate since the start of Beat Saber.
The devices are sorted from the top to the bottom: HMDs, controllers, and other tracking devices (e.g. VIVE trackers), and the devices in the same category are sorted in the order of their positions when they were recognized.
Devices that have been detected as moving will have a * to the left of their serial number, so you can see which device corresponds to which serial number. Lost tracking is indicated in yellow, and lost tracking for more than 1 second is indicated in red.
The success rate is calculated by the number of successful tracking frames divided by the total number of frames. Pressing [CLEAR SCORES] in the settings screen returns the normal rate to its initial state.
As a rough guide, it is desirable to have more than 99.9 (total tracking success rate) for the left and right controllers and more than 99.0 for the tracker. The following section describes how to make a good environment.
The tracking success rate during the last song played is an indication of whether tracking lost did not occur during the previous play. This information will be useful for video recording.
Position, Rotation: UI 位置、角度
Display Layer: 表示レイヤー
Text Size: UI 文字サイズ
CLEAR SCORES: 正常率を初期状態に戻す
Support Oculus Mode: Oculus Store または -vrmode oculus で起動された Beat Saber に対応する
Log Tracking Error: トラッキングロスト時、Beat Saber のログに残す
Position, Rotation: UI position, Angle
Display Layer: UI layer
Text Size: UI text size
CLEAR SCORES: Restore the success rate to the initial state
Support Oculus Mode: support Beat Saber launched by Oculus Store or -vrmode oculus
Log Tracking Error: Log tracking errors to Beat Saber's log
コントローラー、トラッカー
- 十分に充電しておく
- なるべく腕、体、服で遮ることがない位置に装着する
- Tundra Tracker は受光面が小さく遮られやすいので不利
- コントローラーのトラッキングだけを最優先するのであれば、トラッカーは使用しないほうが良い
- レシーバーと接続確立直後は不安定な場合がある
- どんな対策をしても成績の悪いハズレ個体もある
レシーバー
- レシーバー同士は 15cm 以上離す
- Tundra のレシーバーはアンテナ間を離せないので不利
- レシーバーとトラッキングデバイスの間に遮るものがないようにする
- ノイズ源 (PC本体、ファンなど) から離す
- USB 3.0 のハブは使わない
- 電源アダプター付のハブを使用する
- トラッキングデバイスと接続確立直後は不安定な場合がある
- どんな対策をしても成績の悪いハズレ個体もある
ベースステーション
- SteamVR ベースステーション 2.0 を 4 つ設置して、死角をなくす
- ベースステーション周辺の壁を黒布で覆い、壁からの反射をなくす
- 部屋に金属、ガラス、鏡面仕上げのものなど、反射物を置かない、または布で隠す
無線
- 部屋、家から 2.4GHz を発する無線デバイスを排除する。802.11b/g、無線マウス、無線キーボード、無線ヘッドホン。ただ、非通信状態であればあまり影響はない
- 2.4GHz を発する近隣住宅から離れる…無人の大地に引っ越すしかない…
(こんな環境では…)
Controllers and trackers
- Keep fully charged
- Wear the tracker in a position where it will not be blocked by your arm or clothing
- Tundra Trackers have a small surface that can be easily blocked, which is a disadvantage
- The connection with the receiver may be unstable immediately after it is established
- Some bad units may not perform well despite all efforts
Receivers
- Receivers should be at least 15cm apart from each other
- Tundra receivers are disadvantageous because they cannot be separated between antennas
- Keep an open space between the receiver and the tracking device
- Do not use a USB 3.0 hub
- Use a hub with a power adapter
- Use a hub with a power adapter Use a hub with a power adapter Use a hub with a power adapter
- Some bad units may not perform well despite all efforts
Base Station
- Place four SteamVR Base Stations 2.0 to eliminate blind spots
- Cover the walls around the Base Stations with black cloth to eliminate reflections from the walls
- Keep the room free of reflective objects such as metal, glass, mirrored surfaces, etc. or cover them with cloth
Wireless
- Eliminate wireless devices emitting 2.4 GHz from the room/house: 802.11b/g, wireless mouse, wireless keyboard, wireless headphones. However, if they are not in communication, they will not have much of an influence.
- Move away from neighboring homes that emit 2.4 GHz... you may have to move to no man's land...
なるるるるな / NALULUNA
2022-10-06 12:18:10 +0000 UTCアノン
2022-10-05 16:23:46 +0000 UTC