Stargate Staff Weapon Drawing Complete
Added 2023-06-04 08:54:35 +0000 UTCThe stargate staff weapon is complete and I've included all non printable parts needed in the notes. I have specified the use of a 16mm OD by 1mm wall steel tube as this give the item really good strength to weight over the length of this thing which will make it a really good useable prop. It does involve cutting into the pipe to make an opening for the trigger which was the only way of keeping the stiffeness of the staff and not have a siginificant weak point by having two seperate lengths of pipe.
Comments
I found this for the tube on ebay: https://rb.gy/vsegph and this for the rods: https://rb.gy/jnlm7j. Those look correct? I wish there was a way to shorten the M5 rod to exactly 1 meter so I wouldn't have to waste a 2 meter rod for the extra 45mm.
Victor
2024-03-07 00:49:37 +0000 UTCThe design sheet says 1mm wall tubing. Unless I'm reading that wrong
Victor
2024-03-06 22:28:29 +0000 UTCFound this https://www.amazon.com/ft-Welded-Stainless-Steel-Tubing/dp/B08QGS9HC7?source=ps-sl-shoppingads-lpcontext&ref_=fplfs&smid=AHWPRHAU327OZ&th=1 But the walls aren't very thick, so I don't think that it would provide much support for the staff.
Justin Kim
2024-03-06 22:12:38 +0000 UTCI normally use ebay for stuff like that.
Lilykill
2024-03-06 20:49:57 +0000 UTCWere you able to locate all the materials? I just started printing and would love to know!
Victor
2024-03-06 20:37:24 +0000 UTCYeah its full size, its roughly 1900mm long when finished.
Lilykill
2024-02-05 08:35:16 +0000 UTCThis is a dumb question - is this full size or at a different scale?
Elle Heilig
2024-02-04 23:40:26 +0000 UTCDid you find the long-ass m5 threaded rod?
Elle Heilig
2024-01-29 19:19:44 +0000 UTCFor anyone who's wondering, a 16mm tube is about 5/8" in barbarian units. I've found suitable tubes (but a bit thicker than specified) at Home Depot.
Justin Kim
2023-06-04 21:43:30 +0000 UTC
