Exclusive: MMMini Sloth!! with Santa Hat version!

Hi Everyone!

Introducing the new Subscriber Exclusive MMMini Sloth!! I couldn't resist doing a Sloth along with a bit of holiday styling. The hooked hands can make them great as tree ornaments, stocking decorations, etc. Lots of possibilities!

This mini is 100% print-in-place, and requires no supports.  Its a quick and easy print that scales down very well.  I've included both regular and keychain versions.  I did 3 versions of the keychain since each hand could be a keychain loop. There is one with closed loops on all limbs, the front hands only, and the feet only. I think I like the "Keychain_Rear" version the most since you can use the feet for the keychain and the hands as hanging hooks. :)

There are also a pre-painted 3MF for those who want to print it in multicolor! Printing the Santa Hat version is a little more complex since most people are limited by 4-slot multicolor printers, but you can easily get a 5th color to print the hat in red by performing a filament swap just after the eye mask finishes. There is more info on this in the PDF guide, included in the download.

Check out a little preview video HERE.

I hope you like it!
Matt

Pictured Prints use the following filaments***
(reference the numbered prints in last image of the gallery)

(1) Ziro Wood Grain, Overture Chocolate, iSANMATE HS Coffee, Ziro Matte Black, Ziro Matte White, Polymaker Matte Red
(2) Ziro Rainbow Blaze
(3) Ziro Camouflage, Ziro Wood Grain, Ziro Matte Black, Ziro Matte White
(4) Ziro Purple Veil, iSANMATE Blue/Purple, Ziro Starry Sky, Ziro Matte White

*To Download: Click Here to go to the Pinned "the Hub - Info and Current Download Links" post

3D Print information:

• MMMini Sloth:  Includes regular and several keychain versions. There are looped hand options for front, rear, and all hands.  

• Multicolor 3MF files! (For PrusaSlicer, Bambu Studio, and Orca based slicers)
  - Sloth 4-Color
  - Sloth 5-Color
  - Sloth with Santa Hat 4-slot (5 colors if you swap the red in) (see guide for more info)
  - Sloth with Santa Hat 5-slot (6 colors if you swap the red in) (see guide for more info)

• 10% Infill (I recommend Gyroid, Crosshatch or 3D Honeycomb)

• 3 Walls. (Assuming 0.4mm nozzle. Adjust wall count to account for alternate nozzle sizes)

This should generally scale down to about 50% with full articulation, on a well calibrated printer.  Your mileage may vary.

Check out a quick Demo Video!

*To Download: Click Here to go to the Pinned "the Hub - Info and Current Download Links" post

***Paid Links.  As an Amazon Associate I earn from qualifying purchases.