Early Release: Sloth!! (with Tree display)
Added 2025-03-28 23:29:53 +0000 UTC***THIS FILE IS NO LONGER INCLUDED FREE WITH SUBSCRIPTION.
Use the 50% OFF discount code if you want to purchase it.
Hi Everyone!
I've had quite a few requests for a Sloth lately, and though it would be a lot of fun! This is a fully print-in-place design, and it includes a display Tree! It's a lot of fun to fidget with and explore different ways to pose them on the branches.
The Tree includes two separate options... a "Taller" version for most printers (which has a longer trunk to provide a little bit more hanging space), and a "Shorter" one designed to fit on smaller print beds without needing to scale it down (like on the A1-Mini).
Check out a quick Demo Video Here!
I hope you like them!
Cheers!
Matt
Pictured Prints use the following filaments***
(reference the numbered prints in last image of the gallery)
1) Sloth: Overture Brown, iSANMATE HS Coffee, Overture Chocolate, Cotton White
2) Sloth: Ziro Matcha, Ziro Wood Grain, Amolen Rainbow Rock, Cotton White
Tree: Ziro Matcha, Ziro Wood Grain
3) Sloth: iSANMATE Rainbow Upgrade
Tree: iSANMATE Rainbow Upgrade, Ziro Beach
4) Sloth: Ziro Dreamy Dusk
Tree: Polymaker Grey/Orange dual extrusion
3D PRINTING SETTINGS:
SLOTH:
Sloth: Print-In-Place. No support needed.
Multicolor 3MF! (Compatible with PrusaSlicer and Bambu Studio)
10%-15% Infill.
3 Walls
This should generally scale down to about 60%-65% with full articulation, on a well calibrated printer. Your mileage may vary.
TREE:
Tree_Taller: Print-In-Place. No support needed. Brims may be helpful if you have adhesion issues (0.3mm brim gap recommended)
Tree_Shorter: Same branches, but a shortened trunk to fit on smaller print beds
Multicolor 3MFs: for each Tree size (Compatible with PrusaSlicer and Bambu Studio)
15% Infill.
3 Walls
The tree model can become more fragile when scaling down, so try to maximize the scale where possible. As a rough scaling guide, a Sloth scaled down to about 80% will still be able to grasp a 100% Tree.
***Paid Links. As an Amazon Associate I earn from qualifying purchases.
Comments
Itโs no longer active on Patreon, but it is in your March and April archive that was sent to you via MyMiniFactory share invite. I just resent the April share to you. Check your private messages here for more details on that. I send them out at the end of every month.
MatMire_Makes
2025-05-22 17:42:25 +0000 UTCIs he still available or did I miss it ?
Abel Vallejo
2025-05-22 16:22:10 +0000 UTCItโs in all of my public stl shops. Hereโs the cults3d linkโฆ
MatMire_Makes
2025-05-14 13:56:52 +0000 UTCwhere can I purchase this file? trying to find it on 3D cults but no luck
Jassen Ferris
2025-05-14 12:37:33 +0000 UTCI'm obsessed with this updated tree. I printed 5 of them with not a single clog or stop or issue. I can't remember the last time my printer hasn't given me a single issue on a print so many times in a row lol
Courtney Felt
2025-04-12 16:14:58 +0000 UTCHe is adorable, I'm desperate for you to make a wombat to go with the platypus though ๐
Sam Graham Squiz 3D
2025-04-10 00:16:41 +0000 UTCIt is so cute; I love your designs thank you
GATO
2025-04-04 02:25:04 +0000 UTCPrinted this already and love it! Thank you! I printed it one color and painted him (Iโm no artist, itโs just a fun hobby) and heโs adorable! Thank you for all your designs they are always a favorite in our house!
Emily Golding
2025-03-31 15:35:46 +0000 UTCSame here. I printed 4 at 85% with PolyTerra Army Brown. It knocked over 2 of the branches. Did a skip and then it did the same with a 3rd. They start wobbling too much I think. Polymaker -is- more flexible but I am a little worried to try it again.
SneakySmurf
2025-03-30 21:49:08 +0000 UTCLove this! We need a mini Keychain version!
April Laforest
2025-03-30 15:29:37 +0000 UTCPrinted him at 140% with a .6 nozzle and I think this is my favorite item Iโve ever printed
Sandra Authier
2025-03-30 06:05:25 +0000 UTCAny one having issues printing the tree I'm on my 3rd failure atm keeps failing on top branch
Dave Simpkin
2025-03-30 05:46:32 +0000 UTCSuper adorable
Courtney DeFranceschi
2025-03-30 04:53:00 +0000 UTCAWESOME! thank you!!
Whiskey Prints
2025-03-29 18:58:06 +0000 UTCYou should be need to use the paint tools at all on a prepainted 3MF file. You just assign the colors to your AMS and/or swap the colors in the filament selection area. ..
MatMire_Makes
2025-03-29 18:17:39 +0000 UTCI am fairly new to 3d printing and I am wondering if we really have to color each little area to do a multi color? I thought I could just click on each section I wanted a different color color but itโs separating a lot
James Rhodes
2025-03-29 18:10:33 +0000 UTCLove this so much! A little late because I had a nasty partial clog to deal with, it happens.
Mikenna
2025-03-29 15:39:02 +0000 UTCThis is amazing!! ๐ I joined just to get access to the amazing roaring tiger & figured I would just cancel after the month was up but I think I will have to stick around. I donโt want to miss any of your designs & hopefully a GIRAFFE is in your future plans! You can really see your animator background in all of your designs! ๐๐ซถ๐๐ฅฐ
R2PN Sheri
2025-03-29 07:17:54 +0000 UTCCan you do a mini version!! We love him!
Brookein3D
2025-03-29 05:07:50 +0000 UTCI agree with this, I commonly print multiple bodies on one plate and heads on another.
D3D Prints
2025-03-29 03:30:18 +0000 UTCThis is amazing! I've really been loving your designs lately, they're all so different and fun!
Greyson Harness
2025-03-29 02:21:33 +0000 UTCWould be possible to print the head separately and attach it after? It would save on some filament...
Taylor
2025-03-29 02:06:54 +0000 UTCLove the stand inclusion - beautiful details.. ty Matt
ARTICUL8
2025-03-29 01:06:57 +0000 UTCI'm currently hiding this from my mother in law so I can finish printing other creatures. But this guy is amazing and I'm also on the mmmini bandwagon ๐ฅฐ๐
Christopher Marlatt
2025-03-29 00:21:42 +0000 UTCEs tan lindo ๐. Amo los perezosos!!!
Verito Su
2025-03-29 00:15:07 +0000 UTCLove this! Adorable!!
Robin Hadley
2025-03-29 00:07:42 +0000 UTCWow!
IWeav3d
2025-03-28 23:55:05 +0000 UTCAbsolutely love this!
Lanna
2025-03-28 23:46:09 +0000 UTCOhhhh my goodness ๐๐ hopefully mummy and daddy sloth will make mini sloths hehe
David Agius
2025-03-28 23:44:51 +0000 UTCYes yes yes ๐๐ป love it
Ashley Fenstermaker
2025-03-28 23:39:01 +0000 UTCI love it!!
Mariah Vasquez
2025-03-28 23:34:55 +0000 UTCThis is so cute! I hope thereโs a mini version someday soon!
Jazzy Bee
2025-03-28 23:32:21 +0000 UTC
