Bonus Model: Zombeardie Fridge Magnet!
Added 2022-09-14 17:50:39 +0000 UTCHowdy!
I just added the new Zombeardie refrigerator magnet to the downloads post.
I like to throw one or two onto the print bed when other prints are going. They print quickly and use very little material (About 10 grams each, if you follow my settings suggestions).
Cheers! Matt
**Download from the Pinned "Current Download Links" post**
A dab of super-glue on the back of a 10mm x 2.6mm neodymium magnet, like These On Amazon***. will fit securely into the slot on the back
Print Settings:
- 0.15mm layer height
- 3 walls with a 0.4mm nozzle (could do 2 walls with a larger nozzle.)
- 10% Lightning infill (lightning infill is great for these because it keeps the weight down and only creates infill where needed. Keeping the weight down helps the magnets be more effective.)
- 5-6 bottom layers (gives a little extra strength to the magnet attachment area.)
- If your printer struggles with bridging, you may need to add support inside the magnet slot. Give it a try without and see how it goes.
**Download from the Pinned "Current Download Links" post**
***As an Amazon Associate I earn from qualifying purchases
