Lechonk Piggy Bank
Added 2022-06-18 14:15:53 +0000 UTCWell I hope everyone is having a great start to their weekend so far! I know a few of you have mentioned the thought of a Lechonk Piggy Bank and here it is!
I have kept the slot for the coins away from the top-middle so that it has a better chance of printing without supports since you wont be able to get to the inside to remove them. I also couldn't help myself and made a second version with the coin slot on the back end!
There is also a third version that has the two halves snap together if you didn't want to do the full print with the plug at the bottom.
Another note: I have adjusted the Snorlax Bobble and moved the opening for the spring a little further to the back so that it will sit a little more straight up.
Have a good day everyone!
Comments
I just thought I'd share with you guys that printing this at 125% scale makes the hole at the bottom large enough to accommodate coins as large as U.S. quarters.
Daniel Anthony Trombetta
2022-07-13 17:24:10 +0000 UTCI haven't had a chance to update it yet sorry. It will need supports under the belly and possibly under the ears depending on how you can do with overhangs. You'll be ok to not have any supports inside
Mike Hammond
2022-06-21 21:48:12 +0000 UTC1. did you ever get a chance to update this for larger coins? 2. what supports and where do you recommend? I was wanting to print the uncut model but im not sure on the supports inside the belly if it will work.
Olivier Sassine
2022-06-21 21:40:41 +0000 UTCExcellent. Thank you, I'm loving these models.
Daniel Anthony Trombetta
2022-06-20 02:32:39 +0000 UTCI'll take a look at it tomorrow and post an update
Mike Hammond
2022-06-20 02:30:37 +0000 UTCI printed the plug first and noticed it's a little small. How much should I scale it up for larger coins to come out?
Daniel Anthony Trombetta
2022-06-20 02:28:34 +0000 UTCYay
Hayley marks
2022-06-18 19:49:32 +0000 UTCIt's in the Dropbox now
Mike Hammond
2022-06-18 17:11:02 +0000 UTCwhen can we expect the piggy bank
Olivier Sassine
2022-06-18 16:39:04 +0000 UTCGlad the bobble got adjusted. I just assembled the one I printed yesterday and it's a bit wonky
Shawn Pata
2022-06-18 14:19:44 +0000 UTC
