FEBRUARY DOWNLOADS HERE!!!
Added 2025-02-03 06:00:56 +0000 UTCFebruary Downloads HERE!!!...
Comments
try .1 layer height, and supports- only on baseplate. That worked best for me. takes 2min to remove the supports
Charles Piper
2025-03-22 23:58:46 +0000 UTCHaving trouble with the bearing for the Lazy Susan. Using Basic PLA and a 0.2mm nozzle on a Bambu A1. The balls are scattered all over the plate. Trued slowing down some of the parameters, but it didn't help. See https://www.dropbox.com/scl/fi/h9wmcayx4x5ql7st1l5om/Lazy-Susan-Bearing.jpg?rlkey=d2bnsupiavnu5w4qolln96xvz&st=u0iihpk6&dl=0. Any suggestions?
Doug Kaye
2025-03-22 23:05:53 +0000 UTCHey! Sorry, the tolerances were pretty tight. I just adjusted them/uploaded/printed a new version, and they're much better- let me know if there's anymore issues
Charles Piper
2025-02-27 20:07:05 +0000 UTCHaving problems with the briefcase PIP hinges. All but the handle keep snapping. I have adjusted tolerances (and tried the 4 PLA printers and the different slicing software I have access to).
Physics Girl
2025-02-27 04:28:02 +0000 UTC
