STL kit with multiple elements to print separately. 1 x Instruction Manual.
Give your army some air-support with the FREE Vindicator Starfighter kit
/ / / / / / /
This model has been designed to print 100% SUPPORT FREE. To ease painting, it can be printed in sections that can easily be assembled post-paint application using Push-Fit and minimal glue. Some glue and filler are required for this build.
PRINTING ADVICE // Print at 0.1mm or lower for ...
Platform Kit Accessories for MagWall modular terrain system.
Designed to work with the angle of the walls in the MagWall system, but would work with any sci-fi terrain to help your troops get a good line of sight!
STL Set for 3D printing. Best results at minimum 0.2 layer height / 10-15%+ infill.
4x STL files to print flat as a kit to be assembled with push-fit and glue.
Access Stairs Accessory for MagWall modular terrain system.
Designed to work with the angle of the walls in the MagWall system, but would pretty much work with any sci fi terrain to help your troops to not have to clamber over everything!
STL Set for 3D printing. Best results at minimum 0.2 layer height / 10-15%+ infill.
FREE STL! The Xeno Drive Systems Freight Module // Single Pod configuration
/ / / / / / /
Some collab work with Tommy Towne / Star Hole Garage a contribution to the MAG-POD project.
Utilising 6x3mm magnets, this scatter terrain piece will work in conjunction with Tommy's upcoming Ship and Cargo Pods release. (And a future XV-400 Mag-...
