XaiJu
Rafaela Mello (Nympha)

Rafaela Mello (Nympha)

gumroad


Rafaela Mello (Nympha) posts

Satsuki Kiryuin (Kill La Kill) STL for 3D Printing

Sculpture made by NYMPHA3D for collab with Tenshi Figure.

Ready-to-print, Split, Pre-supported and Test printed.

Check out my patreon for more monthly figures: https://www.patreon.com/NYMPHA3D

3D printing settings

Includes the STL file with splitting, keying and presupported ready to print.
Very easy to print and paint.

  • 1:6 scale
  • Height: 279 MM
  • W...

    2025-09-09 03:35:54 +0000 UTC View Post

Eve (Stellar Blade) STL for 3D Printing

Sculpture made by NYMPHA3D.

Ready-to-print, Split, Pre-supported and Test printed.
Recommended for resin printing.

Check out my patreon for more monthly figures: https://www.patreon.com/NYMPHA3D

3D printing settings

Includes the STL file with splitting, keying and presupported ready to print.
Very easy to print and paint.

  • 1:6 scale
  • Height: 338 MM
  • Width: 238 MM...

    2025-09-09 02:51:06 +0000 UTC View Post

Tiefling Woman STL Model for 3D Printing

Sculpture made by NYMPHA3D.

Ready-to-print, Split, Pre-supported and Test printed.

Check out my patreon for more monthly figures: https://www.patreon.com/NYMPHA3D

3D printing settings

Includes the STL file with splitting, keying and presupported ready to print.
Very easy to print and paint.

  • 1:6 scale
  • Height: 345 MM
  • Width: 229 MM
  • Recommen...

    2025-09-05 16:08:35 +0000 UTC View Post

Frieren (Frieren: Beyond Journey's End) STL for 3D Printing

Sculpture made by NYMPHA3D.

Ready-to-print, Split, Pre-supported and Test printed.
Recommended for resin printing.

Check out my patreon for more monthly figures: https://www.patreon.com/NYMPHA3D

3D printing settings

Includes the STL file with splitting, keying and presupported ready to print.
Very easy to print and paint.

  • 1:6 scale
  • Height: 378 MM
  • Width: 183 MM...

    2025-09-04 19:15:32 +0000 UTC View Post

Yuffie (Final Fantasy VII Rebirth) STL for 3D Printing

Sculpture made by NYMPHA3D.

Ready-to-print, Split, Pre-supported and Test printed.

Check out my patreon for more monthly figures: https://www.patreon.com/NYMPHA3D

3D printing settings

Includes the STL file with splitting, keying and presupported ready to print.
Very easy to print and paint.

  • 1:6 scale
  • Height: 295 MM
  • Width: 119 MM
  • Recommen...

    2025-09-01 18:30:58 +0000 UTC View Post

Sailor Moon STL for 3D Printing

Sculpture made by Sara Nobrega for NYMPHA3D.

Ready-to-print, Split, Pre-supported and Test printed.
Recommended for resin printing.

Check out my patreon for more monthly figures: https://www.patreon.com/NYMPHA3D

3D printing settings

Includes the STL file with splitting, keying and presupported ready to print.
Very easy to print and paint.

  • 1:6 scale
  • Height: 298 MM
    • ...

    2025-08-29 16:22:08 +0000 UTC View Post

Supergirl (DC Comics) STL for 3D Printing

Sculpture made by Lucas Tidei for NYMPHA3D.

Ready-to-print, Split, Pre-supported and Test printed.
Recommended for resin printing.

Check out my patreon for more monthly figures: https://www.patreon.com/NYMPHA3D

3D printing settings

Includes the STL file with splitting, keying and presupported ready to print.
Very easy to print and paint.

  • 1:6 scale
  • Height: 373 MM
    • <...

    2025-07-31 16:16:59 +0000 UTC View Post

Morrigan (Darkstalkers) STL for 3D Printing

Sculpture made by Nympha3d.

Ready-to-print, Split, Pre-supported and Test printed.
Recommended for resin printing.

Check out my patreon for more monthly figures: https://www.patreon.com/NYMPHA3D

3D printing settings

Includes the STL file with splitting, keying and presupported ready to print.
Very easy to print and paint.

  • 1:6 scale
  • Height: 304 MM
  • Width: 247 MM...

    2025-04-28 15:43:34 +0000 UTC View Post

Aerith (Final Fantasy VII) STL for 3D Printing

Sculpture made by Nympha3d.

Ready-to-print, Split, Pre-supported and Test printed.
Recommended for resin printing.

Check out my patreon for more monthly figures: https://www.patreon.com/NYMPHA3D

3D printing settings

Includes the STL file with splitting, keying and presupported ready to print.
Very easy to print and paint.

  • 1:6 scale
  • Height: 300 MM
  • Width: 135 MM...

    2025-04-25 19:50:47 +0000 UTC View Post

Aerith Pink Mermaid outfit (Final Fantasy VII) STL for 3D Printing

Sculpture made by Nympha3d.

Ready-to-print, Split, Pre-supported and Test printed.
Recommended for resin printing.

Check out my patreon for more monthly figures: https://www.patreon.com/NYMPHA3D

3D printing settings

Includes the STL file with splitting, keying and presupported ready to print.
Very easy to print and paint.

  • 1:6 scale
  • Height: 300 MM
  • Width: 130 MM...

    2025-04-24 18:39:52 +0000 UTC View Post

Cloak & Dagger (Marvel Rivals) STL for 3D Printing

Sculpture made by Nympha3d.

Ready-to-print, Split, Pre-supported and Test printed.
Recommended for resin printing.

Check out my patreon for more monthly figures: https://www.patreon.com/NYMPHA3D

3D printing settings

Includes the STL file with splitting, keying and presupported ready to print.
Very easy to print and paint.

  • 1:6 scale
  • Height: 312 MM
  • Width: 220 MM...

    2025-04-02 12:26:58 +0000 UTC View Post

Midna (Legend of Zelda: Twilight Princess) for 3D Printing

Midna STLs For 3D Printing

Sculpture made by Nympha3d.

Ready-to-print, Split, Pre-supported and Test printed.
Recommended for resin printing.

Check out my patreon for more monthly figures: https://www.patreon.com/NYMPHA3D

3D printing settings

Includes the STL file with splitting, keying and presupported ready to print.
Very easy to print and paint.

  • 1:6 scale
  • ...

    2025-03-30 23:17:44 +0000 UTC View Post

Yuzuriha (Hell's Paradise) STL for 3D Printing

Yuzuriha from the anime Hell's Paradise

If you wish to commercialize the printed figure of this model you can do so as long as you're subscribing to our patreon https://www.patreon.com/NYMPHA3D


This includes the STL file with cutting and keying.

Very easy to print and paint.


  • 1:6 scale
  • Not pressuported

The STL files are inside the winrar archive, unzip it ...

2025-03-19 21:30:05 +0000 UTC View Post

Samus Aran (Metroid) STL Model for 3D Printing

Sculpture made by Nympha3d.

Ready-to-print, Split, Pre-supported and Test printed.
Recommended for resin printing.

Check out my patreon for more monthly figures: https://www.patreon.com/NYMPHA3D

3D printing settings

Includes the STL file with splitting, keying and presupported ready to print.
Very easy to print and paint.

  • 1:6 scale
  • Height: 272 MM
  • Width: 108 MM...

    2025-02-28 18:06:50 +0000 UTC View Post

Lilith Aensland (Darkstalkers) STL for 3D Printing

Lilith Aensland (Darkstalkers) For 3D Printing

Sculpture made by Nympha3d.

Ready-to-print, Split, Pre-supported and Test printed.
Recommended for resin printing.

Check out my patreon for more monthly figures: https://www.patreon.com/NYMPHA3D

3D printing settings

Includes the STL file with splitting, keying and presupported ready to print.
Very easy to print and paint.

Bowsette STL Ready for 3D Printing

Bowsette for 3D Printing
  • Height: 304 mm
  • Width: 157 mm
  • Presupported: Yes (STL and LYS)


    *This is the file to 3d print it, it is not a physical product.
    Thanks for your attention and I hope you enjoy the model <3

Lucy (Elfen Lied) STL for 3D Printing

Lucy (Elfen Lied) For 3D Printing

Sculpture made by Nympha3d.

Ready-to-print, Split, Pre-supported and Test printed.
Recommended for resin printing.

Check out my patreon for more monthly figures: https://www.patreon.com/NYMPHA3D

3D printing settings

Includes the STL file with splitting, keying and presupported ready to print.
Very easy to print and paint.

  • 1:6 scale 2025-01-30 16:05:20 +0000 UTC View Post

Jinx (Arcane) STL Ready-to-Print Figure

Jinx (Arcane) For 3D Printing

If you wish to commercialize the printed figure of this model you can do so as long as you're subscribing to our patreon https://www.patreon.com/NYMPHA3D


This includes the STL file with cutting and keying ready to print.
- Two different bodies (Standard and Nud3)

Very easy to print and paint...

2025-01-15 19:53:10 +0000 UTC View Post

Raven (DC Comics) STL Ready-to-print

Raven (DC Comics) For 3D Printing

culpture made by Nympha3d.

Ready-to-print, Split, Pre-supported and Test printed.
Recommended for resin printing.

Check out my patreon for more monthly figures: https://www.patreon.com/NYMPHA3D

3D printing settings

Includes the STL file with splitting, keying and presupported ready to print.
Very easy to print and paint.

It is in 1:6 scale<...

2024-12-22 03:31:33 +0000 UTC View Post

Tifa Lockhart (Final Fantasy VII) STL Ready-to-Print

Sculpture made by Nympha3d.

Ready-to-print, Split, Pre-supported and Test printed.
Recommended for resin printing.
*INCLUDES Nud VARIATION

Check out my patreon for more monthly figures: https://www.patreon.com/NYMPHA3D

3D printing settings

Includes the STL file with splitting, keying and presupported ready to print. 2024-12-22 03:09:23 +0000 UTC View Post

2B (Nier Automata) STL Ready-to-print model

STL file ready to print of 2B from Nier Automata

https://www.artstation.com/artwork/rJOLw6

2B from the game Nier Automata

If you wish to commercialize the printed figure of this model you can do so as long as you're subscribing to our patreon https://www.patreon.com/NYMPHA3D


This includes the STL file with cu...

2024-05-23 23:19:47 +0000 UTC View Post

Ann Takamaki STL figure - with NSFW variation

STL file ready to print of Ann from Persona 5

https://www.artstation.com/artwork/9NOQ3v
Ann Takamaki from the game Persona 5

If you wish to commercialize the printed figure of this model you can do so as long as you're subscribing to our patreon https://www.patreon.com/NYMPHA3D


This includes the STL file with cu...

2023-09-24 02:20:58 +0000 UTC View Post