Filament's Folly

Mew Earrings

There are 2 loop types. This was requested. 


edit
error with files - checking them now

edit 2
I think it was a bad upload. 

Skeleton Spongebob

Mew earrings tomorrow.
Ornamental Mew Monday 

Mew Pokeball - Model

This will fit into the normal or master balls.

Resin,
print at a 45 degree angle.
If you print the base/clouds in clear you can light it from below.


FDM
for mew use a skirt, supports and print very slowly.
I would use .12

Masterball

I need to adjust the Mew that goes in this so here the masterball.
This is the same sizes as the normal pokeball.

For printing
FDM - Small or Large
The small size should work but you can do the large if you want.
.12 layer height
Tree supports.

Resin -  Small
This is tricky to print and took me a while to get just right.

You want the outside shells printed flat against the build plate. This took me so long because they were being warped and causing ...

How many designs should I release this week?

you pick

As promised

I said I would make more Pokeballs and this one is coming today. I am test printing Mew right now. If Mew fails, i just release the ball today!

Getting close on the master ball.

Dropbox links are out!!

Pineapple Oddish

So I saw this leak from a new pokemon game and just had to make it.

A Mothers Light - Cubone Skull

For FDM
.12
If you use the full skull I would sink its about 1mm into the print bed to make sure it gets a good grip
Use Supports - I would use tree
Brim
If you do the halfs
.12
Use Supports - I would use tree

resin angle and print.

I have 6 STLs In Cue

These are not all the models for this month, just what I have ready now.

All of these but 1 are already printing, Waiting to be test printed.
1 is Modeled but waiting to be cut down for print.


Cubone Skull
alolan pineapple oddish
Mew Earing
Mew Master Ball
Dead SpongeBob
Watchman Smile Button

Making some new models

Just modeling while playing DND.

State of the Patreon

Hi all.
First of all, thanks for being here. You guys rock!!
ok now that is out of the way. I wanted to discuss piracy. As an artist once you get to a certain level this happens. Do I like it, no. Do I try to stop it, yes. But I can't be everywhere on the internet at once. If you guys see something please let me know. We had a patron leave due to this, and I get it. you want to pay for exclusive access and I want you to have it.

Other Happenings.
I am working on more Mew mod...

Clean Mew

Psyduck came through.

I have it with the tail attached and separate. 

FDM use 4 layer wall or more 

Resin  just use supports. 

Mew Pokeball?

Do we want a Mew Pokeball along with the ornamental and clean versions

Havoc Staff Update

I am still working on this. Its just taken longer than I had hoped. I may have announced to early. Its still coming along. I just finished skull so they can be printed. sorry for the delay 

We Got a Lead

Any day now

Puglie Pug

You guys pic this over the SpiderBaby so here it is.
I have its in parts and as whole.

Ornamental Psyduck

Lets hope hes happy now!

Almost Ready

Hi guys, sorry I have been so quiet. I had to travel for my day job.  This guys is almost ready he WILL be out tomorrow.

Goomba

I have this model in 2 versions and 3 style
version 1
Eyebrows floating

Version 2

Eyebrows attached fully to the head

See pics if you don't understand

Styles
1. in pieces for easy print in color
2. as one piece for no assembly
3. Beta multi color printer stl

Story about this model

Sometimes writers have what's called a trunk novel.....

Well this is a trunk stl. This is my second ever STL I ever made 2 years ago when I started. The ...

We Broke 5000th Place

Just a quick  update guys. Last night we book the top 5000 page on all of patreon.

Thank you guys you made this happen!!

Happy Easter

Taking the day off and will have Goomba out tomorrow!

Update from DS

Anyone know this guy?

I will be releasing this STL with BETA support for multifilament support, I dont have a printer that can do this so I am designing this on a hope and a prayer.

He will have the normal files as well.

Some Ducks are never happy

the Ornamental version is coming soon.

Psyduck requested it - Now you can Print it!

I hope he's happy now and we can get back that mew model.

This is set up for both part printing and single stl printing

It should be sized well for both Resin and FDM. 

Coming this afternoon

please stand by

The saga continues

I guess I know what I am doing next

Reaching out to a friend

To be continued.... 

A tease of my Mew model!

Wait where is my model.....  Its been stolen.... Ill need a detective and I think I know one.