Kekreations 3D

Flexi Feather Dragon EARLY ACCESS

Hey everyone,

It's been a while since I've done a new flexi dragon, so it was well time for a new one! I've had this baby ready for AGES but kept pushing her off for other flexis people were voting on or holiday items that took priority. But she's finally here! She's a personal favorite of mine out of my dragon flexis so far.

Print recs

*3-4 walls
*15-20% infill
*Add a brim if you have adhesion issues
*Should print okay down to 80% size or so. Sized right now to fi...

Wolf Magnet/Keychain Set PATREON EXCLUSIVE

Hey everyone!

Time for this month's exclusive model! The wolf head keychain/magnet set! This might be one of my favorite sets yet, I'm particularly bias towards wolves <3

Print instructions:

• 2-3 walls
• 15-20% infill
• No supports
• Photos here are done with 0.2 layer height, for higher detail you can print at 0.1 layer height* Magnet is made for magnets with 1 inch diameter and about 4.5-5mm thickness. I secured mine in with a small dab of supe...
  2023-09-18 20:22:14 +0000 UTC View Post

Dragon Candy Basket/Flower Planter EARLY ACCESS

Hey everyone!

Time for another Halloween inspired design! Me and Kyyrbes were thinking on a good candy basket option and he thought up this idea and I love how it turned out! A great basket option for Easter as well. And thanks to my Beta Tester's suggestions, I made an edited version with some drainage holes in the bottom to make a nice planter as well! (I didn't have candy on hand for photo ops... So I substituted dice which kind of look like candies xD)

Print recs:
*2-3 wall...

Skull Dragon and Baby EARLY ACCESS

Hey everyone!

Time for more spooky stuff! This dragon and her baby (or without the baby) wrapped up in this skull is a great decoration piece for Halloween, or all year around, depending on your aesthetic ^.^. Shoutout to the discord members for this idea when I was trying to brainstorm some more things for Halloween! <3

Print recs:
*2-3 walls
*10-20% infill
*No supports
*Feel free to size up or down as desired

Model link: 2023-09-13 21:59:12 +0000 UTC View Post

Dragon Gyroid Fidget Spinner Keychain EARLY ACCESS

Hey everyone,

I'm super excited to announce a new type of fidget spinner I'll be putting out! The testing team, myself, and everyone I've let play with it in real life have all loved this fidget so much that I HAD to go ahead and get it out to the rest of y'all! I hope these turn into good sellers for y'all!

Printing recs:
*2-3 walls
*10-20% infill
*Feel free to play around with size, tested down to 75%

Model link: 2023-09-12 04:17:24 +0000 UTC View Post

Haunted Dice Tower EARLY ACCESS

Hey everyone,

Time for more Halloween stuff! This time, the Haunted Dice Tower! A big print but a super fun one! Shoutout to the Discord community for helping me brainstorm this idea for Halloween! <3

Print recs:
* 2-3 walls
* 10-20% infill
* Can print down to 80% and still roll a standard 22mm D20
* No supports needed

Model link: https://www.kekreationsart.com/patreonmod

R...

Phone Holder Dragon-- Card Holder Dragon MOD

Hey everyone!

Little model modification for y'all today. I've edited the card holder dragon so that it can more easily fit many different phones and cases, to be used as a phone holder! The original card holder did okay with holding phones as well, but was much more limited with how large the phone and/or phone case could be. 

The model follows the same print recs are the original: 

* 2-3 walls
* 10-20% infill
* Add a brim for the bottom of the wing tips

Dragon Jack'O'lantern EARLY ACCESS

Hey everyone!

Time to get some Halloween pieces rolling out to y'all :). The first one up is the dragon jack'o'lantern! Beautiful little dragon wrapped up around a pumpkin ^.^ 

Includes 3 variations: 

* One with the face holes and candle indent

* One with a version with a flat bottom and filled but indented face holes as a stash/candy box (The lid fits both versions)

* A small one with a necklace loop, great to print in glow-in-the-dark filament to help...

Model Roll Over

Hey everyone!

Reminder that the models from July will be rolling over now and be REMOVED from the website for this month tomorrow! If you haven't already, go download the zips from the site to keep for later :) If you miss or lose a file at a later date, let me know and I can send it to you!

Thanks,
Kek <3

September Model Vote

Hey everyone!

Wow, I feel like August FLEW by! Probably due to settling in to the move on this end. But that means it's time to vote for next month's model again! No sketches unfortunately since we've been busy with Dragoncon this weekend and me being sick last week. Hopefully you'll still have a good enough idea to vote off of your favorite ideas :)

And for those asking YES I do have Halloween models coming out this month! :) Headed your way soon.

Thanks so much for all you...

Dragon Piggy Bank EARLY ACCESS

Hey everyone!

Time for the winning Patreon/Tribes vote from last month! The dragon piggy bank :) What better place to keep your money safe then with a dragon and it's hoard? This one was a lot of fun and I hope y'all enjoy it!

Print recs:

• 2-3 walls
• 10-20% infill
• Can be sized up or down, but too small may cause the screw plug to be tighter

Model link: https://www....

Community Suggestions Model Poll

Hey everyone,

Time for this month's community suggestions poll! Vote for your favorite model/s that Y'ALL suggested! :) Y'all have the coolest ideas.

Remember to comment or message me your ideas to see if I pick them for the poll next month!

Thanks so much for all of your support <3

- Kek

Mushroom shelves* 

Flexi Gargoyle EARLY ACCESS

Hey everyone!

Time for the release of this month's community suggestions vote winner! The flexi gargoyle :). This guy was definitely a fun challenge to play with and I'm happy with how he turned out! Also a good unintentional kick off for Halloween/spooky models as well! I have several more coming at y'all the beginning of September :).

The next month's community suggestions poll will go up tomorrow!

Print recs:
*2-4 walls
*10-20% infill
*Add brim if you have adhesi...

Skull Dice Tower Mods-- Pendant, wall hanger, tray

Hey everyone!

As per y'alls suggestions I've added a few variations of the skull dice tower! A lot of you suggested making it possible to hang on the wall, and close off that opening in the jaw to make it either as a desk tray or so that it functions even without a flat surface under it. I also thought it'd be a fun piece to size down for jewelry as well!

So all of these and the original version are in the zip folder you get if you click on the Skull Dice Tower on the site! :) 2023-08-29 21:10:53 +0000 UTC View Post

Ouroboros Fidget Spinner EARLY ACCESS

Hey everyone!

New fidget spinner for this month :) The ouroboros spinner keychain! Had a lot of fun with this one and it's probably one of my favorite spinners now, the serpent eating it's tail made for the perfect round base for the spinner to feel nice in the hand.

Print recommendations:

• 2-3 walls
• 10-20% infill
• Prints with 4 lines across the bottom layer to keep the spinner middle from detaching from the bed. Snip those off when you get it off the b...
  2023-08-28 19:53:10 +0000 UTC View Post

Twin Dragons Pen Holder EARLY ACCESS

Hey everyone!

Time for another pen holder! This idea came accidentally when I threw my tablet pen into the mini test print I did of the Twin Dragons Dice tower... And I liked it lol. So a few adjustments to help the balance and here we go. 

Print recs:
* 2-3 walls
* 10-20% infill
* Change size as desired
* No supports

Model link: https://www.kekreationsart.com/patreonmod

...

Howling Wolf Flexi PATREON EXCLUSIVE

Hey everyone!

I am SO EXCITED to send this Patreon/Tribes exclusive model to y'all! The first full-body exclusive y'all get, hopefully many more to come! You can't have a wolf pack with just one wolf, right? So adding a howling wolf variant seemed like the perfect option! I love seeing all these little guys together <3

Print recommendations:

* 2-4 walls
* 10-20% infill
* Add brim if you have adhesion issues
* Prints best at 100% size+, but depending on your print...

Red Panda Keychain EARLY ACCESS

Hey everyone!

A counterpart for the red panda pen holder, here's a little keychain guy you can keep with you! This little guy is very loved by my friends and family members who aren't as into the dragons lol. 

Print recommendations:

*2-3 walls

*10-20% infill

*Add brim if you have adhesion issues

*Feel free to size up or down

Model link: https://www.kekreationsart.com/pa...

Dragon Pill Buddy/Keychain Container EARLY ACCESS

Hey everyone,

Time for a new little functional print! As someone who is chronically ill (as are many of my close friends and family), this one was especially exciting to me! An easy and safe way to keep whatever you need on hand such as important medication, small jewelry pieces for traveling, ect. 

Print recommendations:

*2-3 walls

* 10-20% infill

* Add a brim to the lid piece if needed (especially the notched one)

* Feel free to play around with smal...

Hanging Dragon Planter EARLY ACCESS

Hey everyone.

Everybody really enjoyed the planter released a couple of months ago, so here's a new one! The hanging dragon planter. Works with twine, rope, or chain (2 strings/chains through the mouth, connected down to 4 hooks on either side of the planter. Really happy with how this baby turned out, and hoping y'all like it, too!

Print rec: 

* 2-3 walls

* 10-20% infill

* No supports on head. Support under the very tip of the egg is optional, but me and Ky...

Roaring Dragon Figurine EARLY ACCESS

Hey everyone!

The first dragon in a set of support-free dragon figurines I'm working on! The idea was suggested by a Patreon member and I loved it! These guys can be sized up or down with no problem, depending on your preferences! (It's been tested from 50% up to 200% all support-free)

Print recommendations:

* 2-3 walls

* 10-20% infill

* Add a brim to ensure good bed adhesion

* NO supports

Model link: 2023-08-14 01:07:04 +0000 UTC View Post

Cat Keychain/Magnet Set PATREON EXCLUSIVE

Hey everyone,

Time for this month's magnet/keychain set! Finally the kitty head for this set :) 

Print instructions:

• 2-3 walls
• 15-20% infill
• No supports
• Photos here are done with 0.2 layer height, for higher detail you can print at 0.1 layer height* Magnet is made for magnets with 1 inch diameter and about 4.5-5mm thickness. I secured mine in with a small dab of superglue and they're golden! I went with the glue-in magnets vs print insid...
  2023-08-12 07:57:29 +0000 UTC View Post

IMPORTANT ANNOUNCEMENT - File distribution and membership

Hey everyone,

We have a couple of upcoming changes to membership and file distribution that will be taking place over the next few days.

Annual Memberships and Pricing Update

Starting with membership, we are excited to announce that annual memberships will now be available! Annual memberships will be 15% off of your current tier price. With this new addition, monthly memberships will be seeing a price increase to $1...

Dragon Skull Dice Tower EARLY ACCESS

Hey everyone!

Y'all have all been asking for more, so here's a new dice tower! I'm really happy with how this one turned out, it's a lot of fun!

Print recs:

* 2-3 walls

* 10-20% infill

* No supports needed

Find the file in the Google Drive linked for Patrons here https://www.patreon.com/posts/3d-model-access-82725512 You'll find the file in the "Decor" folder, the...

Baby Fox Flexi Keychain EARLY ACCESS

Hey everyone!

Next up in my baby flexi keychain series, the baby fox keychain! I'm obsessed with this little guy and so are a lot of my friends lol. Similar to the baby wyvern, this guy is durable, floppy, and can do a lot of different poses!

Print recommendations:

* 3-4 walls

* 10-20% infill

* Add a brim if you have adhesion issues

* These guys have successfully printed down to 60% size depending on your printer, so lots of variation to play with! (photogr...

August Model Poll (EDIT - PLEASE RE-VOTE)

EDIT: Reposting this because I'm obviously still tired from the move and forgot to make it multiple choice and Patreon doesn't allow poll editing. Please vote for your favorites again and my apologies <3

Hi everyone!

Getting this up a tad late because of the move, but time for this month's model poll! No sketches this time due to being busy with our move, but hopefully the general ideas will be enough to vote off of.

The community vote poll will happen at the end of the ...

Dragon Jewelry Tray EARLY ACCESS

Hey everyone!

A bit of a late start to the month like I mentioned because of my moving road trip, but here we finally have last month's winning vote model-- the dragon jewelry tray! I was honestly stoked when this won the poll voting because I've been wanting a new jewelry tray/dish to use personally and this was so fun to design! (Peak all my dragon jewelry lol)

Print recommendations: 

*2-3 walls

*10-20% infill

*No supports

*Can be sized up or down as...

July Community Suggestions VOTE

Hey everyone!

Rolling in with the poll a bit late because of my travel, but finally getting in with this month's community vote poll! These are all suggestions from within the Patreon/Tribes community, and the winning model will be released at the end of August! :) 

Always so excited to hear y'alls ideas and bring them to life! Y'all have amazing creativity and help keep me inspired. Remember to comment on Discord, this post, or DM me with any other ideas you have that might ...

Flexi Chameleon EARLY ACCESS

Hey everyone,

Time for this month's Community Suggestions Vote winner! The flexi chameleon :) This guy was SO fun to work on and I ended up enjoying him a lot more than I expected. And thanks to suggestions from testers, his toes even have subtle little grips inside so he can really hang onto things!

Print recommendations: 

* 2-4 walls

* 10-20% infill

* Add a brim if you have adhesion issues

* 100% size he's a BIG boy, he's been successfully tested dow...

Dog Fidget Spinner Keychain EARLY ACCESS

Hey guys,

New fidget spinner this month! Puppy dog one this time, wrapped around a pansy flower :) This one would pair great with the paw print fidget spinner as well!

Print recommendations:

* 2-3 walls
* 10-20% infill
* Prints with 4 lines across the bottom layer to keep the spinner middle from detaching from the bed. Snip those off when you get it off the bed.
* Photographed is 0.2mm layer height, you can print lower layers for better detail

Find the file in...