I've just added a modular stair set to this months files. I had intended it to just be a single flight of stone stairs up to the same level as the risers but saw a lot of potential once I started the modelling.
I've included a small build guide to get you started with the possibilities of all the pieces. The shield is in the new Decorations folder with the peg clip used for it added to the tools.
Back onto Ghoulburg tomorrow :)
I've just added some 1x and 1xL walls to "000 This Months Files\011 Ghoulburg\Walls"
Corner versions are next on the work list for tomorrow :)
There's a new folder on the Dropbox drive called "000 This Months Files". I'll be placing files in this folder throughout the month form now on then sending out a collected link at the end of the month to save spamming you all with lot's of files to download. At the end of the month once the links go out I'll also move the files into their respective folders on the main drive.
Currently you'll find some more cavern tiles and a new standee style door in the dungeon set....
Just a little teaser of a couple of the files that I'll be uploading tomorrow. I have some test prints running over night and some of the wall options to finish off in the morning before upload.
With the release of Warhammer Quest Cursed City coming in a couple of weeks I can see there being some models to go with that sneaking in next month with new wall options and some suitable scatter :)
I've just uploaded the corner floor versions for each of the Dungeon styles to "002 Dungeon Set > Floor Tiles". There's a few variations of each style and tiles for the standard slot floors, slim magnetic and slim slot.
Direct messages should be arriving shortly with a direct download link :)
2021-03-13 08:18:17 +0000 UTC View Post
I've just created a folder called 009 Skeletons on the Patreon drive with the new skeleton miniatures in. They'll need supports obviously but I test printed with the Prusa slicer auto supports and they came out pretty good for FDM. Resin printer is being set up next week so hopefully I can get some resin prints done and pre supported files added at a later date.
Direct messages should be arriving shortly with a direct download link.
Can't wait to see you all print and paint thes...
Who knew February was only 28 days short lol. Totally thought I had another few days to get a February release out so it's been a crazy weekend....
I worked with Greg 3DPrintingPro on some arenas for his Kickstarter and the dungeon one was a perfect fit for the The Dragon's Rest Quest treatment. I've made this dungeon arena a bot easier to FDM print as well as added an entrance door and spectator stand. You'll need supports for the stand and the shields on this one but everything else ...
I've just uploaded all the files for the risers and arches to the Patreon drive and direct download links have been sent to your Patreon inbox. I'll be doing a little build guide to show and example of how these all go together.
First jobs next week (after the build guide) are creating some shorter walls to allow for corner doors and a reverse corner for the Docks. The rest of February I'll be working on the 45 degree wall pieces - still figuring out how best to do these and keep thing...
The risers are coming along nicely. I have a couple of little extra pieces I want to add to them - separate edges, internal supporting walls and the curved variations. Will be uploading everything early-mid next week.
2021-01-17 03:12:26 +0000 UTC View Post
I've been working on the dungeon risers and I'm onto the test printing stage. Playing around with a build and there's still a few pieces missing from these pictures. I'll also need to do a dungeon version of the heroquest stairs with matching height and floor connectors as well as a new modular staircase set.
The risers are in 2 pieces and will raise the floor in 30mm increments. I'll be making some versions with a few designs of windows too :)
I've just added the standard and slim version of the lava tiles to "007 Lava" on the Patreon drive. There's also a new easier to use version of the Wall A Brazier version B added to 002 Dungeon Set>LED
I'll be sending direct download links over now so check your PMs :)
Hope everyone is having a good start to the new year.
I've been working on a set of lava tiles to go with the dungeon set. This one here is a 4x4 tile with a seamless texture so you will be able to expand it as large as you need.
Because I want them to sit a bit lower than the standard dungeon tiles I'm working on a set of riser pieces that can be placed under the existing floors to support them off the table top too.
I'll have some more renders of these over the coming d...
DW Cnr 2x2 A and B have just been uploaded to the folder 005 Docks>Dock Walls on the Patreon drive.
2020-12-11 05:23:08 +0000 UTC View Post
I've just uploaded all the files for building the Orrery to the Dropbox folder. You'll find everything in "006 Orrery"
Build guide included.
The prints themselves are fairly easy. You will need to be getting fairly good prints from your printer to get the smooth action with the gears and there's a few tight fits with the column pieces but nothing a little tap to fit the parts together shouldn't fix - things need to be tight to stop any wobbles and it helps the parts bed into eac...
Mechanics are working. Just a few tweaks to do to stop some wobble on the columns and now to work on the terrain part :)
2020-11-30 00:26:13 +0000 UTC View Post
The internal mechanics for the Orrery are finished and test printing over night so fingers crossed I'll have a video of it in the morning working.
Tomorrow I'll be finishing dressing it up and adding the terrain then sending the download links out the end of the day :)
The version of the HQ tiles to use the 5mm magnet balls to be used with the magnetic walls has just been added to "101 HQ Layout" folder.
The grate tiles from the HQ set have been made into individual tiles and can be found in "002 Dungeon Set>Floor Tiles>DUN Floor Grates 001"
Direct download links heading to your Patreon inboxes :)
I've just added new files for the dock flooring to 005 Docks>Floor Cobble Fan and Floor Cobble Fan Slim.
There's 4 tiling err... tiles that match up when laid out in the order shown T01-T04. Also included is the S versions to allow walls to be added. To keep the pattern matching on the S versions there's each tile with the slots orientated to each of the 4 sides. A-top, B-Left, C-Right, D-Bottom.
I've also moved all files over to Dropbox so things might look a bit different w...
Fancied a little side project over the weekend of building an easier to print version of the HeroQuest board rather than lots of small tiles as per the previous build guide.
I've created a new folder on the Patreon drive called "101 HQ Layout". It contains 35 compiled tile sections and a couple of versions of the logo if you fancy printing that in 3D too.
Combining the tiles has allowed me to cheat with wall placement and straighten some of the wall runs so there's less wobbles ...
I've just added some short walls to 005 Docks>Dock Walls
DW 1x1 1A
DW 1x1 1B
DW 1x1 2A
DW 1x1 2B
DW 1x1 2C
If you have a look in 005 Docks>Dock Walls you'll find some new files:
DW Tower Brazier A
DW Tower Brazier B
DW Tower Cnr 1x1 A
DW Tower Cnr 1x1 B
These are the large corner pieces for the dock walls. I've modelled them to take the small party balloon LEDs so if you print the flame part in some translucent filament you can just paint the main brazier to get a nice lit flame effect.
There's some single wall sections, flooring and stairs being worked on to...
DW 2x1 2A
DW 2x1 2B
DW 2x1 2C
DW Bumper
I've just added some more versions of the Dock Walls and a separate bumper to the 005 Docks>Dock Walls
2020-08-17 10:32:48 +0000 UTC View Post
The Dock to Pier connector piece is up on the Patreon drive in 005 Docks>Dock Walls. I have these next 3 pieces on the printers being test printed overnight and all being good will upload first thing in the morning :)
2020-08-16 09:44:31 +0000 UTC View Post
Just a little update. I've got the dock walls to where I like them now and have just finished the first test print for the connecting piece to the piers.
I'll start to upload these from tomorrow once I have a few more of the pieces sculpted properly.
The Low Piers have been added to "005 Docks" on the Patreon drive. These print as single pieces and should have enough modularity to create a load of different combinations.
I've also added "Pier Stairs Short" into the Large Piers folder that make a nice transition between the 2 sets.
The large pier pieces have been added to "005 Docks" on the Patreon drive. I've included some guide holes that you can use off cuts of 1.75mm filament pre-gluing to help get things lined up :)
2020-06-23 10:10:45 +0000 UTC View Post
Here's a little work in progress render of the piers for part of the docks. These are the first 2 of the large 2x2 tiles. The test prints have come out nice and I hope to have the rest of the large pier pieces finished tomorrow and uploaded. They print without supports and require the top and bottom sections gluing together.
I've also updated the 002 Dungeon Set\Walls\DUN Wall B with new straight walls and also the DUN Wall A folder with magnetic versions - The Wall A files have had th...
Pretty much finished blocking in the dock pieces and working out what's needed and how it's all going to connect together. I've also blocked in a couple of boats to see how'd they look.
Starting on the sculpting for the jetty parts next :)
I've just added the folder "002 Dungeon Set\Custom Pieces\DUN Rotating Room" to the Patreon drive.
There's a few new files in there that allow you to create a spinning room to confuse or your adventurers. Both standard and thin tiles are included.
DUN Wall B Corner 1x1 S01 v02 has also been updated to address a problem with the the model being a bit to thin around the clip holes that was preventing them from slicing cleanly.
DUN Floor A Curved - Folder
DUN Slim Floor A Curved - Folder
DUN Wall B - Folder
I've just added 3 new folders to the 002 Dungeon set. There's the first set of style A curved floors and the Style B curved Walls.
You'll also find an new Magnetic type of wall and slim floor that does away with the need for clips if magnets are your thing.
There's more variations on these walls to come but I need to get on with the Docks. I've been gathering a load of reference and pla...