projectmobius

Small update - ship port in the making

Apologies for having a relatively small update / progress due to work this week has been super super busy.

But as mentioned in the discord, I've been working on the ship port for the ships and here's a sneak peek. Do let me know what you think or what I can add / change to make it better!

Row, row, row your Japanese boat

Finishing up the third boat, which is a small storage boat. Going to start a small port soon after I finish packaging next month's release. I'm sure everyone is excited to get their hands on the M.A.S (medium assault spaceship) 's hangar section plus the L.A.S (light assault spaceship) that you can place inside the hangar!

Diner boat anyone?

Happy Saturday!

Here we have a second Japanese boat called yakatabune - a traditional Japanese houseboat, often used for dining and entertainment cruises. In my case its a diner.

Next one I'm working on is a smaller "storage" type ship.

Here's a very early preview. The scale is probably off for the back but I'm still playing around the overall shape. But I do hope you guys like this new line of ship models!

2025-08-09 14:24:06 +0000 UTC View Post

Flying sushi boat anyone?

So as per suggested over on Discord and inspired by the flying Thai from the classic movie The Fifth Element. I've once again jumped out of my comfort zone and learned something new. This time a new technique that I've not used before to create the body of the flying sushi boat which will be part of the Shin Edo set. I know there's a whole lot of room for improvement but this is a good start for potentially a new line of design I can do :)

I'm thinking of a flying bath boat (Yubu...

August release is out!

This month we wrap up the last 3 pieces for the Skyscraper Chiheisen. Please be patient as I send MMF invites when you show up on the list of benefits since everyone joined at different time.

• underground parking lot

• upper atrium floor

• CEO level floor

Next month we will be launching the M.A.S (medium assault spaceship) based on supporter votes!

Big ship is almost ready!

This medium assault spaceship (M.A.S) is almost ready where I'm wrapping up the bridge.

On another note, looks like the poll results are complete opposite between votes in Patreon and those in MMF lol. In total there were 31 votes out of 15 people voted for the Outpost Ymir stretch goals which is a VERY VERY close call! But a win is a win right?

But I want to throw this at everyone which I apologize for not including in the poll last time. Are you ok for me to release the...

Outpost Ymir Kickstarter update + opinions needed!

So this week the kickstarter ended a lot better than I expected. We have unlocked 10 stretch goals which you will obviously be getting! I am currently wrapping up the last stretch goal which is a smaller outpost.

My question to you all is, do you want me to start releasing the big giant spaceship or get the stretch goals for the outpost first? If we do go with the stretch goals, it will be...

The final section of the ship - work in progress

So this week I finally got back to the spaceship and onto the front portion of the ship. Will focus on wrapping up the exterior first then the interior/bridge. The L.A.S in red will be store in the ship's hangar (and also for size comparison showing the size of the bigger ship)

Hope you like this small update! Enjoy your weekend!

Another small weekly update

Two more stretch goals are completed for the Ymir Outpost kickstarter - the giant plasma gun and transport truck.

I've also finished the top of the crew quarter and I will finally work on the bridge/front of the ship and the base ship will be complete!

July release is out!

This month's release will be 5 of the stretch goals unlocked from the Chiheisen kickstarter. Next month will include the remaining stretch goals.

• alternate lobby center piece and door

• alternate transceiver

• active suspension damper floor

• alternate covered roof top stairwell

• landing platform

Next month:

• underground parking lot

• upper atrium floor

• CEO level floor 2025-07-02 02:08:31 +0000 UTC View Post

Weekly dose of update is here!

So I have been busy with the Kickstarter and just wrapped up the 4th and 5th stretch goals.

Switching gears back to the spaceship's crew quarter the interior and sides are done. You will notice there's a ball turret on the side to provide some more fire power. The capsules are the beds. Each one is attached to the walls using openlock clip. There is also a vending machine kind of console as we...

Outpost Ymir Kickstarter stretch goal updates

So as you know I launched the Outpost Ymir on Kickstarter on Monday and I have shifted my focus on the stretch goals for a bit before going back to the giant spaceship. Here are the 3 stretch goals I've done so far.

I actually forgot to show you all a test print of part of the ship. Not the smoothest prints I know :) AAAAANND I also forgot to share the crew quarter section with you which was still work in progress. Will pick up where we left off soon.

2025-06-21 03:49:15 +0000 UTC View Post

Engine section complete!

Finally got the engine section complete, for now at least. Now the ship also has a dual rail gun! You have the option to use that or a regular top piece as shown. I also made this section a bit less busy to give it some breathing room on the eyes for the overall ship.

The next section I am working on is the crew quarter but with a twist. Gone are the traditional bunk beds that I've done so many times. This time around I will be using capsule like "slots" that will be locked on to...

Engine section in progress

Here's another update on the medium assault ship, currently working hard on the engine section. The exterior and the boosters are pretty much done, focusing on the interior right now! Then will work on the top pieces for it last.

Hope you all like the progress so far!

[update@2025-06-09] Patreon 202502 the aa_turretPlatform.stl from plasmaAAgun had a piece sticking out to the bottom. It has since been fixed and updated.

Welcome pack has been updated!

For reaching the third goal on MMF Tribe (60+ tribers), this Stingray has been added to the welcome pack.

Thanks again for all the support!

June release is out - final piece of Town of Shin Edo!

This is the last of the four release of Town of Shin Edo set!

This set includes:

• residential building #2

• Kagiya Bar

• spaceship - m-type with stand and diorama terrain

Enjoy!

Now the ship has a common section

Few days ago I realized I was missing a common section that connects each section together specially on the second floor. I didn't want to just leave it as a long endless platform with no "stop" so I spent most of this week to design a common section for both floors and with gates/doors.

Feels much better now that this common section will create some "breathing room" and space between sections.

The next section I want to do will be the engine room because I have some...

Ship second section 95% complete

Hi everyone,

I present to you the second section of the medium assault ship. It has two floors, the upper section is the control tower overseeing the adjacent hangar section. The main hull is like a cargo bay of sort. This section also comes with some weapons - the quad laser cannons on each side plus functioning missile launchers on the top by rotating the missile piece in and out. The render shows when they are rolled out vs retracted.

I might add more props later. Do let me kno...

Now onto the second part of the assault ship

First of all I fixed my printer (again) by replacing the nozzle, heat throat plus the silicone heat protective thingy for the heat block. So I painted the remaining pieces of the L.A.S and reprinted the top piece. Pretty happy overall with how it came out consider I didn't print this at a super fine layer setting at all around 0.12 to 0.16 mostly.

Now onto the main update which is the assault ship's hull / control tower for the hangar that was "completed for now". There will be a...

Hangar done for now

The hangar is done for now, planning to release this along with the L.A.S some time near the end of the year. Will see how things go! Also my printer is back online and was able to print the cockpit piece of the L.A.S. Pretty happy with the result consider how un-tuned my printer is :)

Also also also I started working on the Outpost Ymir's Kickstarter. And here is a sample setup I've assembled.

2025-05-10 13:04:35 +0000 UTC View Post

Carrier hangar- building in progress

Happy Sunday!

For those not in my discord, I had the idea of building a Homeworld inspired carrier that would hold the smaller L.A.S. The entire carrier will be HUGGGGEEEE so I have decided to separate out into sections. That will also help in releasing the whole thing on Patreon and MMF. Each release can be used on their own, at least that's the plan anyway so that you don't need to have the entire thing before you can start printing/playing with them.

The first part will be the ...

May release is out - Town of Shin Edo!

This is the third of the four release of Town of Shin Edo set

This set includes:

• residential building #1

• pagoda

• spaceship - Nemoleth

Enjoy!

L.A.S ready

Happy Saturday everyone!

I present to you the L.A.S (light armored shuttle) which is a smaller version of the L.A.T.S that was shown last week. It is a single seater and I am planning to add some pew pew to it so we can convert this to a light fighter/defender.

Defend from what you ask? For those who isn't on my Discord, I am playing with the crazy idea of designing a "carrier" of sort that can carry some of these fighters. Initial assessment tells me it will be at l...

All right. I want combat seating. You know your places.

Bonus brownie points for those who knows where the quote came from :)

Excited to say the L.A.T.S (light armored transport ship but again if you have a better name please suggest) is almost done. This version comes with a triple barrel turret on top and missile pods just behind it for basic defense. The sides are designed to have switch outs (the two protruding blocks just beside the windows on the left side of the ship.

The ship is operated by 2 pilots and the captain in the middle...

Another ship building in progress!

Hi all I am finally back with a small update!

I am currently working on another ship and as usuall I don't have a name yet so if you can suggest one! It will be some kind of an explorer kind of ship with interchangable pieces. I have designed it so that the sides can be swapped out with weapons etc

Hope you all like it so far!

April release is out - Town of Shin Edo!

Hi everyone,

I am pleased to announced the second release of the Town of Shin Edo - another set of cyberpunk / traditional Japanese styles buildings!

The set includes:

• building #2

• storage

• monowheel - Murasaki

Enjoy!

Just a reminder I will be gone tomorrow and returning on the 8th so I will do my best to give access to those showing up in the Benefits on my page as quickly as possible. Fo...

Important please read!

Hi everyone!

Important update first - As mentioned before I will be adding more early bird slots here as well as adding a new early bird tier on MMF on March 31st. For those who are subscribed to the Private 2nd Class please switch to the early bird asap to take advantage of it. For those subscribed to Private 2nd Class annually, I will provide a discount code to make up for this.

Now back to regular update, I was able to complete the Stingray spaceship based on ...

Small update for m-type fighter

Apologies for lack of update this week as I have been super busy at work but I was able to finish the diorama pieces for the m-type. I've also included a stand for the diorama piece that is tilted 30 degrees for a slightly different look.

I am planning to make a stingray inspired spaceship and curious do you also want a version that a mini can actually stand on like the mini is riding it?

Also reminder about adding more slots for early bird. So for those who's curre...

Residential #2 + another small space fighter

I added a couple more props and decor to residential #2 then I started working on an R-type inspired spaceship. I guess it didn't work out too great based on the initial design since it looked like a certain something something. Therefore I went back to a blocky cockpit instead and it turned out much better.

I'm going to call it M-Type, M for Mobius obviously. It will come with a stand that you see here as well as diorama terrain pieces as if its flying in some kind of a trench. ...

Japanese residential building #2 progress plus IMPORTANT update

Happy weekend everyone!

Just wanted to share the progress of the residential building #2 from the Shin Edo set, this one has two floors but the difference is players enter from the second floor through the steps and walk down to the first/basement floor. Hope you guys like this style!

Almost forgot to share the monowheel - Murasaki which will be released next month! It is my first time designing monowheel!

So here comes the IMPORTANT update, for ...