Maple3D

Another for good measure!

Just in case the other files haven't been enough to start off the month how about another?! I have definitely been feeling like I needed to get out of a creative rut and doing different models helps so yesterday I modelled this Machamp Bust. 

It prints in 2 pieces with a little support needed under the head. I printed it vertical as it is but if you rotate it so it prints on the back, you can get away with less supports but you end up with less detail on the actual print depending ...

Not the usual model!

Well as you can tell I switched it up on you guys and did something a little different. You have a support free Gabumon from Digimon available to you to run off and print. I felt like I needed to switch it up a little bit and some of you have mentioned you wanted more Digimon so I figured why not! 

Not much else to it so enjoy the rest of your weekend and have fun!

Christmas and a bit of a bobble

As mentioned earlier, you have some new Christmas files out for you now! Our friendly Bidoof and Sandshrew have found their Santa hats and decided to get into the spirit of things. Both are support free and come in a hanging version as well as just a regular static model.

Way back at the start of the year I released a Snorlax bobble with the full model stuck into a base to make a bit of a "bobble head". Well I have revisited that concept and done it better this time around making it an ...

December Picks and Updates

Well I hope everyone has had a good start to their December and cracked open their advent calendars! Personally I got to open up my craft beer advent calendar and the Pokemon TCG calendar I'm sharing with my son which he loves. 

The December poll picks finished up last night and below you can see what the top 4 picks were and what will get modelled this month. In no particular order:

Scorbunny
Quilava
Raichu
Turtwig

Aside from those you will have a bunch of oth...

December Poll

Well we are just about to get into the last month of the year and what a year it has been! Sooooo many models and so many new faces have joined this Patreon and I couldn't be more grateful for it all. Below you have your last poll for 2023 and I think I got some fan favourites in there for you guys to choose from. 

You have until November 30 at 5pm EST to get your vote in so don't hesitate and miss out.

Aside from the models that get picked you will have some new Christmas mo...

#126

The last of the poll picks for this month has just been uploaded to the website! You have Magmar ready to go and will need some supports underneath the torso but other than that you should be good to go.

Be on the lookout for the poll for next month's possible models and have a great day everyone!

New Articulating Model!

I have broken new ground on the whole flexi-articulating models and I'm pretty stoked about the next possibilities. As you can see from the pictures you have an articulating Pidgey to run off and print, completely support free and pretty fun to play with if you ask me. I have so many bird torsos around my desk from testing this thing out!

Once you print this one you will be able to see all the movement you can get from it but essentially you will print the feet and head separate from th...

#245

The next file is available to you now over on the website! Able to be printed without supports, both the Ornamental and Basic versions of the legendary Suicune is out now. Not much else to it so go grab the file and get printing!

Depending how the test print in progress goes, you may have a new articulating print coming to you later tonight as well.

I hope you are all having a great day and happy printing!

It's so cute!

I have a few things on the go right now for all of you wonderful people but while I finish up some of the other models you can have a go at printing this alternate version of Phanpy that was released a little while back. This cute little knit version shouldn't need any supports and you have a coloured 3mf file for those of you that have a Bambu. Let me know if you would like to see any other previous models re-done like this!

# 383

Well in case you didn't get enough from yesterday's massive file drop I have something else for you today. A little more traditional for what you can get from me and as you can see from the pictures, you have the Ornamental and Basic versions of Groudon ready for you to grab over on the website. 

You should be able to print these without supports but you know your machines best so do what you feel comfortable with.

Enjoy your day and show off those prints!

Chess Set!!!

The Chess Set is finally here and I'm pretty stoked about it! This is absolutely the biggest project I have done to date but I think it has all been worth it. Now go grab your reading glasses because we're about to get into it!

The entire collection of files can be printed without supports which was one of my main goals for this set, as well as make it as customizable as possible. I wanted it to be as easy as possible to get a good looking group of models regardless of your printer spec...

New Support Free Files!

Three new files area available over on the website and from the pictures you can see that they are Pikachu, Charizard, and Nidoking! These will just be the Basic versions and I will not be redoing the Ornamental designs. These one's were redone because of a need for the chess set and the extra Ornamental designs would just take way too much time.

Groudon needs to be cleaned up and prepped for printing and then the files will be all yours.

That's all for now, enjoy your day everyon...

# 062

The first pick from the poll is out on the website and ready for you to download and print! #062 Poliwrath will need some supports in between the legs but should be good to go without every where else. The chess set is nearly done and I can't wait to show it off to all of you. 

Have a great day everyone!

New and Updated files

The first of the new and updated files are over on the website. All are now good to be printed without supports so there's no excuse for not printing them! 

More coming soon!

Access Updates and Models

I have just finished updating the website permissions for everyone that has hit the 3, 6, or 9 month landmarks for active subscription. If you think you should be able to have access but can't get to the page, just send me a message and I can get you sorted. 

I have also added all of the Christmas models to this months folder so that those of you that don't have access to the Archive yet can still start printing the holiday models. 

New models for November will start dro...

November Preview

You voted and let me know what you want to see in the month of November! We have in no particular order:

Magmar
Poliwrath
Suicune
Groudon

Also coming to you in the next few days will be some remixed models that have been previously released so that they can now be printed easier and without supports. These new models are Mewtwo, Charizard, Espeon, Vaporeon, Espeon, Nidoking, and Pikachu. 

As you can also guess from the second picture, I have been building out t...

November Poll

October is nearly over and that means it's just about time to get another poll going for the next month! This poll will go until October 31 at 5pm EST so make sure you get your vote in before it's closed. It has been another busy month and I can't thank you all enough for supporting me and this Patreon. If you have any suggestions for how to improve don't hesitate to reach out and let me know.

#243

Your last file for the month has just been uploaded on to the website! Raikou in it's Ornamental and Basic version are both support free and ready to be printed. It has been a busy month with 15 files coming at you so make sure you download them off the site before they get moved over to the Archive if you don't have access to that yet.

The poll for next month will be going up tomorrow and then a bit of a preview for what you can expect in November. It's a big project that can be broken...

# 486

Another file has just dropped over on the website! Regigigas in his Ornamental and Basic versions are ready and waiting for you to print them. They will most likely need a little support underneath the arms, but other than that you should be good to go.

One more poll pick to go!

Articulating! Again!

After some bed adhesion problems I finally got this one to print for me. Articulating Ekans is out now for you and can be printed without supports. As you can see from one of the pictures there is a coloured 3mf file for those of you that have a bambu. 

Aside from the two poll picks that still have to come out I am hard at work building out my biggest project so far. This unnamed project has tons of customization and a lot of moving parts! I'm trying not to get carried away but it'...

Another Skull!

Another print ready to go without supports is waiting for you to download. Head on over and grab the Tyranitar skull in either the solid or hollowed out version. The hollowed out version will need supports on the inside but you should be good without on the solid.

Enjoy the rest of your day everyone!

# 095

Another poll pick is up and ready for you over on the site! Our classic friend Onix is a pretty easy print that you should be able to get away with either no supports or minimal depending how your machines run. Both the Ornamental and Basic versions are there so go get 'em and get printing!

Articulating!

After a successful test print I have just uploaded your newest articulating file! You have the support free articulating Dratini ready for you to grab and print. Not much else to say but I want to have a few other articulating models for you in the coming days.

Enjoy!

EDIT: A small edit has been made to help with the second joint behind the head to stop it from slipping out. The new file is on the website and marked updated in the name.

Drink Koozie

I hope everyone is having a great weekend so far and has the itch to print something new today! I have just uploaded a modified version of the Pot of Greed file that works for a stylish drink koozie. It fits can sizes of 473mL or 16oz and just like the larger original, you can print this without supports. That's all for now and enjoy!

#810

The next Ornamental and Basic models are available to you now on the website! The adorable starter Grookey is a support free print for both versions. That's about all there is to say about that one so enjoy the rest of your day and have a great weekend!

#399

The first of the poll picks is now out for you to download and print to your hearts content! Both the Ornamental and Basic versions of Bidoof can be printed without supports so just drop it into your slicer and print away.

More to come so stick around

October File #1!

This first one for the month came from a need to switch things up a bit and get a change of pace from the usual subject matter that you guys tend to get from me. Admittedly, Yu-Gi-Oh wasn't as big of a part of my childhood as Pokemon was but I still collected the cards and watched some of the show growing up. 

This Pot of Greed collection that you guys now have available has a few different versions ready, The standard version with the handle that you might be aware of, a version w...

October Preview and Updates

I hope everyone is having a great start to their week and are getting into that spooky feeling! We had another tight race in the poll for the October models and you can see the list of what will be modelled below.

Onix
Grookey
Raikou
Bidoof
Regigigas

As you can see there are 5 in the list instead of the regular 4! We had a tie between Bidoof and Regigigas so it looks like they will both be getting made.

It's going to be a busy month with the poll...

File #10!

Last but not least you have the final file for the month of September, Zacian, ready for you to grab from the website. It will need some supports, mainly on the back end of the two fin-like objects on the back as well as the sword if you choose to go with that version. I have also done a version without the sword just incase you have trouble getting it to print on FDM machines.

That's it and that's all for the month! A lot of good models got released this month, let me know which one wa...

October Poll

Another month is nearly over and that means we are on to another poll for the next month. A big thank you to everyone that has recently joined or those of you who stuck around and continue to support me and this Patreon. I have had some major personal changes in my life over the last few days and this Patreon and your support means more than you can imagine!

Now on to the list! You will have until September 30 at 5pm EST to get your vote in so don't wait too long. As always, it is the t...