Maple3D

115. Kangaskhan

I have just uploaded Kangaskhan to the website so go get it! It will need some supports under the hands, but other than that you should be good to go.

Ivysaur is coming tomorrow so hang tight!

Have a great day everyone

#674. Pancham

The adorable Pancham is out now for all of you to download from the website! Both the Ornamental and Basic versions have the leaf as a separate part for you to glue into it's mouth but both prints will need supports under the head.

Nothing else to it so have a great day!

Charmander Planter

It was definitely a sadder part of the original cartoon when Ash walked up to the Charmander on the rock, trying to keep it's flame going. But what started as a somber moment flourished into an amazing story! I turned that moment into your very own printable version so make sure you cover that flame with a plant of your own and keep Charmander dry.

This wont need any supports so just slice it and hit print. There is also a version without the planter hole for those that dont have a gree...

Planters, planters, and more planters!

If you were wondering what the newest release was and couldn't guess from the title, it's PLANTERS!

You have the Oddish, Gloom, and Vileplume evolution line all available to you and can be printer without supports as well as some remixed versions of some of the skulls into planters. Oddish, Gloom, and Vileplume all have painted files available for the Bambu as well.

I have the furthest thing from a green thumb but I'm sure there are quite a few of you that can make these prints lo...

Articulating Sylveon

Whaaaaat? It's finally here?! Some said it would never happen but we have finally reached that day, articulating Sylveon is on the website and ready for you to download and print. It is print in place and doesn't need any supports so go get it and have fun! There is also a painted bambu file available as well thanks to one of your fellow members.

Nightstand Organizer

Well I said it would be real soon for the next one so here it is! I was using the Gigantamax Gengar to hold all my stuff on my nightstand but wanted something a little more practical and whipped this up. Definitely not my usual offering on this Patreon but I'm sure some of you can make use of this as well. 

It prints without supports when you lay it down on the back and I printed mine at 0.3 layer height, 2 walls, and 8% infill.

You will have to wait a little longer for the n...

Victreebel Desk Mate

Another filehas just been added to the website and this time you have Victreebel ready to eat anything you throw at it! You can print this without supports like I did or use supports where you feel necessary. I have uploaded the painted 3mf file that I used for my own print for those that use the Bambu. Also in the folder is a planter version with a drain hole added. The print is probably too narrow to get any pre made pot inside but the file is there for those that can use it. 

I ...

Rayquaza Phone Holder

Friday is finally here and so is another file to print! On the website now is this support free Rayquaza phone holder with a port for your charging cable to run through underneath. I printed mine without supports but support where you feel necessary on your machines.

I have also finished updating the website permissions so all of you that have reached the 3, 6, and 9 month milestones should now have access to the Archive or the loyalty packages. There were just over 200 of you that had ...

June Preview

A big thank you to everyone who supported me in the month of May and to those that are sticking around for yet another month!

The poll for June finished last night and in no particular order we will be getting the following models this month:

Zapdos
Ivysaur
Pancham
Kangaskhan

Thanks to everyone who voted and picked some great models!

Website permissions will be updated tomorrow for those that have reached the 3, 6, or 9 month milestone once Patreon has finishe...

June Poll

Well somehow we're already in June and just about half way through another year of doing this Patreon, not too sure where all the time is going... But another month means another poll of Pokemon to vote on to see what will get modelled this month so let's get to it!

You can find your picks below and as always, the top four after the voting closes will be the ones to get modelled. Choose wisely!

Voting will close May 31 at 5pm EST

031. Nidoqueen

Happy Sunday everyone! Uploaded just now is the last of this month's Poll Picks, Nidoqueen! I think she turned out great and will need minimal supports on the arms unless you can get away with a good overhang.

A new poll for the June models will be going up soon so make sure you vote in that to make your voice heard. If you have any suggestions for what you would like added, comment below!

Enjoy the rest of your weekend!

104. Cubone

Happy Wednesday everyone. I have just uploaded the next ornamental model, Cubone, to the website. You have both the ornamental and basic versions available to you as usual but both will need supports. Supports will be needed underneath the skull on those bottom pointy parts but the rest of the model should be ok without.

One more poll pick to go! Enjoy the rest of your day.

906. Sprigatito

I hope everyone is having a great weekend so far! I have just uploaded Sprigatito to the website in both the Basic and Ornamental versions. You should be able to get away with not using supports but do what you feel comfortable with.

That's all for now and enjoy the rest of your day!

#909. Fuecoco

Ornamental and Basic versions of Fuecoco are now up on the website for all to go download! You will need supports under the top tooth but other than that you should be good without. 

That's it for this one so have a great day everyone.

Dagan Gera Saber

Just a quick post to let you all know I have fixed the Emitter_bottom piece for the lightsaber. the zip file has the new piece or you can download it separate so you don't have to download everything again

Dagan Gera Lightsaber

So I started playing Jedi Survivor last weekend and when I saw this lightsaber come up within the game I knew I had to model it. Definitely different than what you usually get from me and this Patreon but I hope you like it either way. 

I have tried to cut it up into as few parts as possible to make it a little easier to print when it comes to supports, but because of some of the shapes, we couldn't do it without them. The top of the sleeve will need the most supports but I have al...

Blastoise Skull

I hope everyone is having a great Sunday so far and maybe looking for something new to throw on those printers! The newest skull to the collection has just been uploaded to the website and as mentioned yesterday, it is Blastoise!

You wont need any supports for the solid version but you will need some on the inside of the hollow one.

Back to it for me, have a great day everyone.

Venusaur Skull

Well it looks like this is slowly turning into the month of skulls at this rate. I have just uploaded a Venusaur skull to the website in both the solid and hollow versions with the hollow version being the only one that will need supports.

And before you ask, I already have a Blastoise skull modelled, it just needs to be cleaned up and prepped for printing so you will have the famous three available to you.

6 models in 6 days! It's gonna be a good month!

Desk Tentacruel

In case your desk is still empty and you are looking for something else to fill the space, I have just uploaded this creeping Tentacruel to the website!

You wont need any supports and there is also a version with the body broken up into parts for the multi colour printer people.

So much more to come! Have a great Friday everybody

May the force be with you

A bit of stray from my usual subject matter but since I'm a big Star Wars nerd I figured I would get in on the festivities today and do something a little different.

You have 3 new plates for the V2 Switch dock that show off the Jedi, Mythosaur, and Sith depending on where your allegiances lie. 

You should be able to print these without supports so get to it and have a great Star Wars day!

Website Permissions

I have just finished updating the website permissions for those that have reached the 3, 6, or 9 month milestone. If you think you have hit a certain milestone and still don't have access just send me a message and we can see where you stand.

Enjoy the rest of your day

Hollow Charizard Skull

Just a quick post to let you all know that there is now a hollowed out version of the Charizard skull. It will need supports on the inside.

Charizard Skull

May is starting off with an awesome easy print in the shape of a Charizard skull! This one doesn't need any supports so have fun! I have included a version with a cut out for a 18mm x 5mm magnet that I made for myself. Nothing else to this one so lets get this month of models going!

Have a great day

April Files

Just a reminder to sign up to the Patreon before May 1st if you haven't already and  would like to get the April files before they get tucked away into the Archive. There was a ton of stuff released this month including:

• Ornamental and Basic versions of Munchlax
• Ornamental and Basic versions of Sylveon
• Ornamental and Basic versions of Leafeon
• Ornamental and Basic versions of Slowbro
• New Nintendo Switch Dock with 6 swappable plates
• ...
  2023-04-29 11:39:36 +0000 UTC View Post

May Poll!

Here is the poll for all of the choices on the board for possible May models. I tried to get a mix of the generations and put the newest starters on there and see if we can start knocking those off our list. For those that are new, it will be the top 4 that will get modelled.

Voting ends April 30 at 5pm EST so don't forget!

470. Leafeon

Another model! Leafeon is out now on the website for you to download. This one wont need any supports so as always, just slice it and let it go!

This is the last of this month's poll picks but I will be putting up the poll for next month's choices probably tomorrow. So let me know in the comments if there is anything specific you would like me to add to the poll.

080. Slowbro

I hope everyone is having a great week so far and maybe looking for something new to print this evening. I have just uploaded Slowbro to the website for all current members. 

This one will need some supports on the teeth but other than that, you should be good to let it go.

Just one more poll pick left this month in an already jam packed month that has been full of models!

700. Sylveon

It's been a long time coming but Sylveon is finally available on the website for all to download. You should be able to run this one without supports so have fun and get printing!

Slowbro is all done being modelled, just needs to be cleaned up and prepped for printing so you will have that coming at you very soon. This month has flown by and I can't believe it's almost the end.

Enjoy the new model!

Switch Dock v2

I have just uploaded a bunch of files to the website and I'm pretty stoked about this new collection. As you can guess from the title of the post I have made a version 2 of my Nintendo Switch dock and gone for something that is easier to change out and saves you on time and material when you do feel like a change. 

First off, the housing for the Switch itself is really straightforward and holds it nicely, still gives you access to the inputs for cords and prints without supports - ...

Krabby Pen Holder

Your desk just got a little cuter! Well after you print this new Krabby pen holder it will. It prints great without any supports and is nice and small so it doesn't take up too much space on your desk. 

This is also the first model, of hopefully many to come, that has been split up and ready for multi colour printing! Hurray! It took a lot of fumbling around and I'm sure it will still take some time to see what I am able to do with breaking up prints, but I think I'm on the right t...