Hey Everyone,
I have switched everything over to Dropbox to hold all of the files. There have been issues with people not seeing the newest upload for some reason so hopefully this resolves that issue.
https://www.dropbox.com/scl/fo/cziimo5qnff73sacvfubc/h?dl=0&rlkey=37wue61esnp2u0uukzrx9so43
2022-05-11 18:02:53 +0000 UTC View Post
Just a quick post to let you know that I have made some small changes to Noibat that will hopefully aid in a more successful print.
I made the legs a little thicker all around so they should be more stable now and the fangs have also been adjusted so that the first few layers are a little flatter and I have made the fangs a little thicker.
V-2 file is in the Drive folder
Thanks for the feedback everyone!
Ornamental Abra is in the Drive folder for you now. It will need some supports under the legs and nose, but other than that it should be a fairly straight forward print!
Have a good Monday everyone!
2022-05-09 14:56:52 +0000 UTC View Post
No supports needed for this one so just hit slice and have fun!
2022-05-03 00:24:20 +0000 UTC View Post
Happy Monday Everyone!
Well it's the start of a new month and that means a new collection of models. Included in this month's Ornamental designs we have the winners of the community poll and those are:
Houndoor
Abra
Garchomp
Togekiss
A pretty good group that will look great in the ornamental style. Aside from the Ornamentals I will be releasing a handful of other designs throughout the month including the Articulating Umbreon that you already have, the Articulating ...
2022-05-02 19:43:05 +0000 UTC View Post
Articulating Flareon will be ready for you soon!
2022-05-02 00:45:58 +0000 UTC View Post
It's in the Articulating folder, no supports needed so have fun!
2022-04-29 19:13:09 +0000 UTC View Post
First off, thank you to those that submitted a photo into the contest! There were some really great prints that came out off your printers.
Winner of Best Photo of a Maple3D model is this beautiful photo by Leonel Jose using multiple Fuecoco models munching on some fresh peppers and Tabasco! So creative!
Winner of the Best Painted Maple3d model goes to Philip D'Angelo for making those Ornamental Pokemon really pop and bring out those details!
Winners will be contacted ab...
Ornamental Noibat is waiting for you in the Drive folder and that finishes off this month's ornamental models! It will unfortunately need a lot more supports than the usual models I have released previously but I have tried to make it as minimal as possible while keeping it a good looking model.
Going over this last month it has been a busy one with 9 Easter eggs, the new Raichu nesting doll, 5 Ornamental models, and the articulating Vaporeon. Not a bad haul if I say so myself! Al...
2022-04-27 19:47:22 +0000 UTC View PostWell it's that time again already for you to vote on what you would like to see modelled in the month of May. It will be the top 4 that will be modelled (you got lucky last time with 5!) so make sure you vote so you can help get your favourite. You have until this Friday at noon EST to make your pick!
Thanks again for everyone's support!
2022-04-27 13:03:38 +0000 UTC View Post
The next ornamental model in this month's releases is Lugia and it is ready for you to print! In the drive folder I have included a screenshot of where I would place custom supports on both sides of the model.
There is one more model to be released before the end of the month and then we get a whole new set!
Ornamental Farfetch'd is ready for you to download and print! Supports will be needed under the torso and maybe under the beak depending how your printer is with over hangs.
Lugia will be up next!
2022-04-21 19:36:22 +0000 UTC View Post
The Ornamental Glaceon file is ready for everyone to download. This one will need a little more supports than the last few, mainly underneath the torso and probably under the tail depending how your printer does with adhesion and over hangs. Other than that you should be good! Farfetch'd will be coming to you in the next few days as well. It's been a busy month of models and the last few will be coming to you soon!
2022-04-21 03:28:37 +0000 UTC View Post
Well this Patreon just hit 100 subscribers and it's a little surreal to be honest. This Patreon has been such a fun adventure that has made me a better designer and has connected me with so many great new friends.
I have lists of models and designs that I can't wait to make for everyone and I'm looking forward to see how this patreon...evolves... 😆
Thank you to each and every one of you! You're all amazing.
Cheers to the first 100! 🍻
Mike 🍁
Hey Everyone,
Just a quick post to let you know that I have updated the original Vaporeon - Softened the back and tail spikes and increased the area under the collar so it should be a little cleaner without supports (still have supports on those first touch points though).
I have also made a version with the tail separate for those that like to go big. The curved tail version wasn't really giving you a bigger version without compromising the quality.
Ornamental Glaceon will ...
2022-04-19 13:36:35 +0000 UTC View Post
File is available in the Drive, articulating section. It will need some supports under the front part of the collar but other than that it’s a pretty straight forward print.
Have fun!
2022-04-10 20:41:15 +0000 UTC View Post
The first of this month's poll winners is Vulpix. For the FDM people you shouldn't need any supports for this one. Maybe think about a smaller layer height to ensure you get all those nice details. Just in time for some weekend printing so make sure you tag me in anything you post on your socials, I love seeing the prints!
And don't forget to get your entries going for the contest!
Go get em!
2022-04-04 20:31:51 +0000 UTC View Post
It's contest time everyone! Get those printers ready and pick out your favourite model because it's a free month of the Patreon up for grabs! As this is the first time we're running this I'm sure there will be some things that will change logistically going forward as we figure out what works best for everyone.
Categories
1. Best photo of a printed Maple 3D model.
You can choose from any model that has been released over the course of th...
Well it looks like everyone will be getting an extra model this month due to a three way tie in the poll! It's going to be a busy month so make sure you stick around to get some awesome models including:
Vulpix
Farfetch'd
Lugia
Glaceon
Noibat
Thanks to those who voted!
2022-03-31 12:15:56 +0000 UTC View Post
Right before the end of the month we have another set of Easter Eggs for everyone!
Thank you again to all of my patrons, those that have been here from the start and those that have just subscribed. It has been a great month for growth and I can't wait to see how big we can make this!
Contest details will be announce on April 1st so get your printers ready because the winners will get 1 month of the Patreon for FREE!
Happy printing!
2022-03-30 20:38:32 +0000 UTC View PostWell March has gone by quickly and just like that it is time to vote on who you would like to see modelled for April. Remember, we take the top 4 and whoever doesn't get picked will stay in the poll unless it gets zero votes, then it will be replaced with something else on the next one. This poll goes until March 30 and results will be posted on the 31st so get your vote in now!
Aside from the poll results there will also be a new set of PokeNesting dolls, another articulating Poke...
2022-03-28 11:19:45 +0000 UTC View Post
The last of this month's Ornamental Pokemon is in the Drive folder ready for you to print! No supports needed for this one on your FDM printers so just slice it and hit print.
Don't forget about our facebook group if you want to connect and share with others from the Patreon and make sure you tag me in anything you post! I love seeing what you do with the prints.
2022-03-24 18:56:43 +0000 UTC View Post
Umbreon is available to all patrons now! That's 3 down and 1 to go for this month with Eevee being the last one left. Umbreon should only need some small supports under the chin to make sure you get those details, otherwise it's a pretty straightforward print.
Don't forget to tag me in anything you share on your socials, I love seeing all your prints.
Have a good week everyone!
2022-03-21 17:45:56 +0000 UTC View Post
Here's a nice and easy print for everyone in between Ornamentals. A little companion for your desks who can keep your pens or paint brushes safe in his mouth.
No supports needed for FDM so just drop it in your slicer and get 'er goin!
I also did up a quick planter version as well if you want him to eat some plants lol.
Files are available now!
A HUUUUGE thank you to everyone who has joined this Patreon and chosen to support me, continue to push my designs, and create some pretty awesome prints in the process!
This has been a big month in terms of how much we have grown so far, 22 new patrons in the last 2 weeks so I would like to say welcome to all of our new members. Side note, don't forget about the Facebook group if you wanted to join that as well and keep up with others members of the patreon.
Stay tuned for the ...
The Ornamental version of Dragonite is ready for everyone to print! I did a bit of a new pattern for this one compared to the previous so let me know what you think. I thought it would be a good idea to change it up a bit and I think I like how this one turned out. I did one ornamental version that was sort of like a hammered copper type of look and a regular ornamental version.
For FDM you shouldn't need too many supports, between the legs, a little under the upper lip maybe...
2022-03-14 20:02:51 +0000 UTC View Post
As we get ever so closer to the 50 Patron Goal I wanted to just do a quick post for it. Once we hit the goal we will be running a monthly contest with 2 winners receiving one month of the Patreon for free!
Categories for the contest will be Best Painted model and best photo of a model for those that aren't into the whole painting thing.
I will release the rest of the details for the contest when we hit 50, but until then keep on printing!
A quick post to let everyone know that the Ornamental version of Mewtwo is waiting for you in the Drive folder. The basic version will be uploaded next, it just has to be posed. For FDM you should only need supports on the feet, under the side... nubs? And under the left arm. I haven't test printed him yet, just uploaded him as soon as he was done.
After the basic version is finished, Dragonite will be next!
So after some thinking and a bit of communication from some current members I have decided to forgo the 100 Patron goal to open up the back catalogue of files and just open it up now. I want to give everyone the opportunity to print their favourite model whenever they want, regardless of when they join.
I have made some changes to how the files are stored on the Drive, nothing major, but just a little more organization now that everything is available.
Now that everything is avail...
2022-03-07 14:45:31 +0000 UTC View Post