Maple3D

#182

Yet another poll released is out now and you can go grab the files from the Maple website! Bellossom is out in both the Ornamental and Badic versions and both can be printed without supports. The flowers on the head are printed separately and you can just pop them on with a bit of glue.

Enjoy!

Cute and Cuddly

I hope you all are having a great day so far and are up for another cute print! If you are then you can head on over to the Maple website and grab the newest file available, Knit Piplup!

You can print this cutie without supports and for those that have a Bambu or Prusa mmu machine, you have a painted file ready to go.

That's all for now so enjoy the rest of your day!

More Skulls!

Your gen 1 grass starter has maybe seen better days but this is definitely one to add to the collection. Head on over to the Maple website now and grab the files for a solid and hollow version of Bulbasaur. You will need some supports on the side of the head but nothing too crazy. Also if you do the hollow version you will likely need some under the top of the skull.

Enjoy and have a great day everyone!

A Legendary Print

Happy Monday to all of you and I hope you had a great weekend! I have been hard at work getting this next addition to the Diorama series finished and after modelling it, cutting it up, and getting it supported and ready to go for those resin printers you now have this gorgeous looking Moltres diorama to add to your collection.

This was a fun one to model and to try my hand at something a little more dynamic than what I usually do and really show off Moltres in a perfect pose.

Like...

#393

I hope everyone is having a great week so far and you're itching for something new to print. I have just uploaded the newest files to the Maple website and as you can see from the pictures it is none other than the adorable Piplup! You have the Ornamental and Basic versions ready to go and both should be able to be printed without supports but you know your machines best.

That's it for this one so enjoy the rest of your day and happy printing!

Caaaa-Lick!

So I have been watching aaaalot of One Piece lately and figured it was about time to get something made from that part of the anime world too. And what better way to branch out into the world than something fun and easy like the Transponder Snails.

For those that have watched or read One Piece you will know how prevalent the snails are and how certain characters have their own version and of course we have to start with the main man Luffy as the first design. But for those of you who s...

#250

Like I mentioned earlier today you now have the first release of the month available to you now! The legendary bird Ho-Oh is out now in both the Ornamental and Basic versions and you should be able to print both without supports. I have separated the feet and wings from the main body for both versions to make this one easier to print.

Lots more to come so get those printers ready and enjoy the rest of your day!

Website Permissions

Just a quick post to let you all know that I have finished the website updates for the Archive and Loyalty Packages for those that have hit the 3, 6, and 9 month landmarks. If you do not have access to a page you think you should then just send me a message and I can get you sorted out.

First file should be out later today!

August!

A big thank you to all of you who voted in the poll! The results are in and the top four have been picked. The four that you can look forward to are…

Rayquaza

Ho-Oh

Piplup

Bellossom

Hopefully I can do them justice and bring you guys some fantastic looking prints. Another thank you for the continued support to me. I love doing this and it wouldn’t be possible without all of you ❤️.

Website updates for Archive and Loyalty packages will be ...

In case you missed it…

July was another jam packed month of awesome files and just in case you missed the release posts, here’s a list of what came out this month. You can go grab these files from the Maple website now from the “Monthly Files” page until the end of the month at which point they will be moved into the Archive.

Articuno (Basic and Ornamental)

Metagross (Basic and Ornamental)

Latios (Basic and Ornamental)

Chimchar (Basic and Ornamental)

Squirtle Squad Switch Dock 2024-07-30 11:54:24 +0000 UTC View Post

August Poll

I cannot believe we are already done July and getting into August! This year has flown by so far and with another month coming to a close, that means another poll for all of you to decide what gets modelled in August. As always it is the top four at the end of the poll that will get picked so use your vote wisely!

The poll will close on July 31 at 5pm EST so don’t wait too long and miss out.

#381

I hope everyone is having a great day today so far and you're itching for something new to print. Out now over on the Maple website you can go and grab the last of the poll picks, Latios! As always you have it in both the Ornamental and Basic versions and you can print both without supports. The wings have been split from the body so you can print them separate and then just glue them in.

That's all for now so go get the files and get printing!

#376

The next addition to the Ornamental and Basic designs is here! The mighty Metagross is ready to be printed and is looking good. You can go grab both files from the Maple website now so head on over and get it on the print bed. Both versions will need some supports under the X on it's face but other than that you should be good.

Have a great day everyone!

Beautiful Bookends

Hey everyone! I hope you are having a great day and nothing but successful prints so far! I have just finished uploading a new set of files over on the Maple website and this time you can go grab the Espeon and Umbreon Bookends. Both can be printed without supports and since I have designed them to look like they have been carved from the rock they are sitting on, they will look great in just one colour.

There's nothing like a nice simple print to get you rolling into a good mood so go ...

Get the Squad Ready!

I hope everyone is having a great day and week so far and you're itching for something new to print! Out now over on the Maple website you can go and grab both the Squirtle Squad Diorama and the Squirtle Squad Nintendo Switch Dock.

All versions will need minor supports but I have done my best to do a dynamic scene and still have it printer friendly. The flag prints separately in two parts so that wont need any supports and you can just slide it into Squirtle's arms.

For the docks ...

#144

Another model is out and ready for you to go grab over on the Maple website! This time around you have the next model from this month's poll picks, Articuno! As always you have both the Ornamental version and the Basic design and both have been cut up to make printing the legendary bird a little easier. The tail and feet have bee removed from the main body so you can print them separate and limit the need for supports. You will still likely need a few supports on the wings but nothing too cra...

Articulating Doggy!

Just in time for the weekend you can go and grab the newest articulating print, Articulating Entei! This legendary dog wont need any supports and you have a painted file ready to go as well. That's about it for this one so no need to ramble on, go grab the file and get printing!

#390

The first of this month's poll picks is out now and as you can see from the pictures it's the adorable Chimchar! As usual you have both the Ornamental and Basic versions ready to go and you should only need a little support on the Ornamental for some of the smaller design overhangs.

Not much else to say so go grab the new files and get printing! More files coming soon!

Veemon!

I hope everyone is having a great day so far and even better prints! I have just uploaded the newest file to the Maple website, Veemon from Digimon. This guy may need minimal suppoprts depending how your machines do with overhangs but if you do need them, it will be pretty minimal.

I have added a painted 3mf file for the Prusa and Bambu machines as well as a pre-supported file for the resin printers. You also have a Lychee working file if you wanted to change anything up to suit your ma...

July!

July is here and that means new models! Go run over to the Maple website and grab the new Diorama and Dice Tower files and get them going on your printers. Both are of the Gastly evolution line and include Haunter, Gengar, Mega Gengar, and Gengar VMax.

Both versions are support free and come with a painted 3mf file. The total painted colours in the file is 6 but for those that just have the one AMS you can always change the black and yellow to a white filament and add in those colours w...

July preview

Hey everyone! I wanted to give you all a little sneak peek at what I have been on over the past few days and what you can look forward to in July.

The next model in the diorama series in the favourite Lucario and he’s firing off a powerful blast at his opponent! I have just finished cutting and keying the parts but still want to give it all a test print before I release it to all of you. You will also be getting pre-supported resin files with this diorama as well. I’m also working ...

If you missed it…

If you have had a busy month and missed all the releases then here’s a quick glance at all the models you can grab over on the Maple website!

Knit Goku (Painted 3mf included)

Pen Eater Fuecoco (Painted 3mf included)

Derpy Slowpoke (Painted 3mf included)

Geodude Planter (Painted 3mf included)

Rowlet Phone and Switch Holder

Articulating Seaking (Painted 3mf included)

Bulbasaur Diorama (Presupported for Resin)

Perfect Cell Skull

Jirachi (B...

July Poll!

Happy Friday everyone! I hope you are all having a great day so far and have some exciting plans for the weekend.

June is just about over and that means that it’s time for another poll for the next four models to be made. I think I have a nice mix of old and new and cute and cool in this list so I hope you have something in here that peaks your interest.

You will have until June 30 5pm EST to get your vote in so use your voice and help choose a good one!

#385

The final models from this month's poll is finally out and if you have been following so far then you know that it's none other than Jirachi! This cute and cuddly guy will need some supports under it's head but I have separated the side ribbons on the head so that they can be printed flat and then added on after.

It has been another jam packed month and I hope you had something that really made you want to print it. If not, July is coming quick and I have some great models planned!

Knit Super Saiyan!

I hope everyone has had a great weekend and you're scrolling for something new to print later. Head on over to the Maple website and you can grab the newest model, The Knit Super Saiyan Goku! You will need some supports under the back of his hair but other than that you should be good.

I have also included a painted file and even if you just have the 1 AMS you can still do a 5 colour print. Just add a pause to the print after all the blue has been printed and swap in the black so you c...

#252

The newest member from the poll picks is out and you can go grab it from the Maple website now! This support free Treecko is ready to go in both the Ornamental and Basic designs ready to just hang out and chill. This guy is super easy to print so no excuses for not getting this guy on your build plate and adding it to your collection.

Have a great Friday everyone!

Another Desk Buddy

Well I hope your desk still has some room on it because you have a new friend waiting for you. Head on over to the Maple website and grab the file for the new Fuecoco Pen Eater! No Supports needed for this guy and you already have a painted file ready to go too. If your desk is already full from the other friends you have printed, maybe use this guy to catch the Bambu poop?!

Enjoy and have a great day everyone!

The Craziness Continues!

Mondays can be tough so why not lighten things up a little with a simple print of of everyone's favourite pink pal, Slowpoke! This guy wont need any supports and there is a painted file ready to go for the Prusa and Bambu machines for the multi coloured prints.

Nothing else to say so grab the file and get printing. Have a great day everyone.

#722

The next model from this month's poll picks is out now and you can head on over to the Maple website and go grab Ornamental and Basic versions of Rowlet. Nothing too crazy with these files so you should be able to print them without supports but you know your machines best, so do what feels right for you.

More coming tomorrow so stay tuned and have a great day everyone!

Spice up your Garden!

If you're one of those people who have a greener thumb than me than this next print may be something you can add to your personal garden! Head on over to the Maple website and grab the new Geodude Planter, ready to go in a painted file and no supports needed.

The hole cut into Geodude fits a 3.25" diameter pot but I have also included a version of the file where the arms can be printed separately so you can increase the size and it still be printed on the smaller beds.

Have fun!<...