I've got gadgets and gizmos aplenty for you this month as we celebrate the release of The Little Mermaid live action remake! we'll be jumping straight in with everyone's favourite guppy, Flounder, coming to the page in a couple of days, followed by our next Magical Item for the collection, with both small and full sized printable versions of King Triton's trident. I'll also be releasing a few more little surprise extras not to be missed!
Then moving into June we'll be continuing our Lit...
2023-05-17 23:44:21 +0000 UTC
View Post
We started off the Easter month with a fun little Egg hunt to mark the occasion and celebrated with the one and only Thumper as the first model of the month. I also started the next mini collection on the page with the adorable Donald Duck as the first release from my new Disney Baby collection.
Then starting off May I made a lovely Honey pot inspired by Winnie The Pooh, who was the next character added to the collection this month. I also made a Winnie The Pooh rose model and a beautif...
2023-05-17 23:37:38 +0000 UTC
View Post
Bring a touch of magic from the hundred acre wood to your home with this beautiful family tree, inspired by the home of Winnie The Pooh. The tree is fully printable in one piece and has branches stretching right the way around, meaning there's plenty of space to decorate with all the initials of your loved ones. Letters A-Z are available below in a compressed file. The base is decorated with the famous Winnie The Pooh quote ''any day spent with you is my favourite day'' and is quite large, le...
2023-05-17 03:51:15 +0000 UTC
View Post
Brighten up the room with the latest addition to our rose collection, available to download below! I printed mine in Golden PLA, using my standard settings with the exception of lowering the support density to 10 percent, due to trauma from the last print. This model has made a lovely addition to our kitchen but its suited to bring a vibrant decorative touch to any setting!
The fourth model for the mini collection will be out in a couple of months.
Next up is t...
2023-05-14 02:32:36 +0000 UTC
View Post
Our next character this month was the tubby little cubby all stuffed with fluff, its Winnie The Pooh, now available to download below.
The test prints ran smoothly, with a well placed drain hole to the underside of his belly. He should be fine printing on either resin or FDM since he has no small areas, but the bees wings unfortunately probably won't survive on FDM.
I printed the ornamental version with Golden PLA, which has become my new favourite filament ...
2023-05-13 02:18:38 +0000 UTC
View Post
The decorated version of Pooh is now all ready to download below! The test print again ran nice and smoothly, with a well placed drain hole to the underside of his belly. He should be fine printing on either resin or FDM since he has no small areas, but the bees wings unfortunately may not survive on FDM.
I've printed him at 12cm tall, which is a little shorter than Mickey to account for him being sat down, he's turned out a pretty nice size to go alongside the rest of the collection wi...
2023-05-10 02:47:01 +0000 UTC
View Post
The first version of Pooh is now all ready to download below! The test print ran nice and smoothly, with a well placed drain hole to the underside of his belly. He should be fine printing on either resin or FDM since he has no small areas, but the bees wings unfortunately may not survive on FDM.
I've printed him at 12cm tall, which is a little shorter than Mickey to account for him being sat down, he's turned out a pretty nice size to go alongside the rest of the collection without look...
2023-05-05 02:32:00 +0000 UTC
View Post
The patterning is all finished and Pooh is looking pretty fancy, I'm just working on the renders and he will be up on the page. I went with a leafy and floral theme this time since he lives in the woods and I thought it suited quite well. I really love the big patterns on the side of his face, they give a really fancy helmet appearance to the patterns which just looks really cool. Overall I'm pretty happy with this model and since he's a special one I'm really excited to paint him and add him...
2023-05-03 00:02:20 +0000 UTC
View Post
Winnie the pooh is the iconic honey loving teddy bear from the incredibly popular franchise of the same name. He spends his days going on adventures with his best friend, a boy named Christopher Robin, and all of his other stuffed animal friends, usually on a quest to find honey.
For the model I have to add a nod to Pooh's honey addiction so I'm going to model him holding a honey pot like in the picture above, I also really love the bee sitting on the end of his nose, s...
2023-05-02 13:42:31 +0000 UTC
View Post
If our last character wasn't sweet enough for you maybe this will sweeten the pot! we're starting off our Winnie The Pooh themed models with this lovely decorative honey pot, now available to download below.
I printed mine in gold PLA at 13cm tall (including the lid) but it can easily be re-scaled and used for all sorts of things! I'm currently using mine as a water pot for painting, the lid comes in really handy to keep out dust! I'll be downsizing this model quite a b...
2023-05-02 02:27:19 +0000 UTC
View Post
We're ending the Easter festivities with the start of a brand new mini collection on the page! and since spring wouldn't be complete without a chick, who better to start off my adorable range of lo-poly Disney Baby's then the one and only Donald Duck.
The new collection will include many baby characters from right across the Disney range, decorated with the traditional Lo-poly carved look, which sets them apart beautifully from our main collection. I'll be releasing new models every so ...
2023-05-01 00:57:26 +0000 UTC
View Post
Hopping onto the page to celebrate the Easter month was the adorable little rabbit, Thumper, as the first of our character models out this month. I printed him in 2 different sizes, large and small and both models turned out really nice, although I definitely prefer the smaller one, which just seems like a nicer fit alongside the other models. I plan to make quite a few characters from Bambi and I didn't want to run into sizing issues down the line, since Bambi is twice Thumper's size, so I d...
2023-04-27 17:16:40 +0000 UTC
View Post
Decorative Thumper is now available for you to download below! I printed this one at 9cm tall instead in order for him to be a nice size when I make Bambi and Flower, the clean version was printed at 11cm tall for those wanting to print both the same size. The test print again came out perfectly with a drain hole placed directly under his belly, he also doesn't have any thin or fine areas so there shouldn't be any problems printing on either resin or FDM. Any questions or iss...
2023-04-25 21:55:48 +0000 UTC
View Post
The test print is all finished and Thumper is now available for you to download below! I printed him at 11cm tall which is a little shorter than Mickey, the print came out perfectly with a drain hole placed directly under his belly, he also doesn't have any thin or fine areas so there shouldn't be any problems printing on either resin or FDM.
RESIN
45 DEGREE ANGLE
DENSITY 75 PERCENT
RAFT SHAPE SKATE
FDM
2023-04-22 00:44:01 +0000 UTC
View Post
Thumper's patterns are all done and I've got the test print running overnight, so providing there's no issues with the print he'll be out on the page sometime throughout tomorrow. This one went surprisingly easier than I thought it would and ended up just being a really fun model to sculpt, I'm quite happy with the way he's turned out, I think I managed to capture his cute and ecstatically happy expression quite well. Which concludes this post! Next out will be the ornamental variant followed...
2023-04-20 19:13:24 +0000 UTC
View Post
Thumper is Bambi's best friend who is primarily known for his trait of repeatedly thumping his foot on the ground. His role in the film is to teach Bambi the ways of the forest.
I've decided to model him like in the pose above, while also incorporating him thumping his foot to give him a little personality. This slight adjustment will probably be the trickiest part, but I think overall it'll be a pretty straightforward model to sculpt. I really like Thumper as a c...
2023-04-16 18:02:01 +0000 UTC
View Post
Starting off April I've got an egg hunt lined up as a bit of fun for over the Easter holidays, don't worry there's no Disney themed riddles involved you just have to follow the links on each page to find the next egg! The hunt takes you on a mini tour around the PoisonApplePrints main pages, where you'll find a little info about each page including what I've got planned over the following months, along with a link to the next egg. I thought this would be a fun way to celebrate our fir...
2023-04-16 01:51:07 +0000 UTC
View Post
This month on the page we'll be adding a couple of amazing fan favourites to the collection, starting off by celebrating Easter with Thumper as our first character model of the month. I'll also have a fun little eggstra special extra to go alongside him, as well as the start of the next mini model collection coming in a couple of weeks.
Then later in the month we'll be adding our second character model to the collection with the one and only Winnie The Pooh, alongside his infamous honey...
2023-04-14 00:24:50 +0000 UTC
View Post
This month was the first of our Patron Picks month's on the page and we had some amazing choices! We started the month with Minnie Mouse and ended with Pascal from Tangled, and they've both made perfect new additions to the collection.
Elsewhere on the page I had lots of extras out this month! we celebrated mothers day with some unique Minnie inspired gifts with a cute little mom sign and Minnie flower wall plaque, I also introduced the first set of Mouse Ears to the page inspired by th...
2023-04-13 17:32:39 +0000 UTC
View Post
Trust me pet, Listen to your mother, It's a scary world out there! So protect yourself from the Ruffians, thugs, poison Ivy, and quicksand, now you can be the bad guy with Mother Gothel's Dagger, available to download below!
The print comes in 4 pieces, which makes it much easier to paint, and is really easy to assemble with the included pegs which help to ensure the pieces line up properly when gluing. I printed the blade using silver PLA and printed the handle pieces using white. ...
2023-04-13 01:13:42 +0000 UTC
View Post
Whether you're honoring the lost Princess or you just wanna see the floating lanterns gleam, light up your home with these lovely tangled inspired electric tea light holders, available to download below. There are 2 versions available, a small embossed version and a large silhouette version.
The embossed version should be printed upside down, completely support free and can be re-scaled freely, but it needs to be printed in vase mode in order to make it thin enough for a battery o...
2023-04-12 00:11:34 +0000 UTC
View Post
The second and final of our Patron Picks this month was Rapunzel's colour changing sidekick Pascal, chosen by Aurélie, now available to download below!
I'm happy to report no issues running the test prints, although the drain hole was a little difficult to place with him being so small, I settled on placing it on the underside of his belly. His textures and details have come out really clean, and he doesn't have any thin or fine area's so there shouldn't be any p...
2023-04-11 17:37:39 +0000 UTC
View Post
Fancy Pascal is all ready to download below. The drain hole was a little difficult to place with him being quite small so I settled on placing it on the underside of his belly and I'm happy to say had no issues with the test print. The texture and detail has also come out quite nicely, and he doesn't have any thin or fine areas so shouldn't have any problems printing on either resin or FDM.
RESIN
45 DEGREE ANGLE
DENSITY 75 PERCENT
RAFT SHAPE...
2023-04-06 23:57:31 +0000 UTC
View Post
Pascal is now all ready to download below. The drain hole was a little difficult to place with him being quite small so I settled on placing it on the underside of his belly and I'm happy to say had no issues with the test print. The texture and detail has also come out quite nicely, and he doesn't have any thin or fine areas so shouldn't have any problems printing on either resin or FDM.
RESIN
45 DEGREE ANGLE
DENSITY 75 PERCENT
RAFT SHAPE S...
2023-04-05 02:03:23 +0000 UTC
View Post
The patterns are all done and Pascal is looking awesome, I went with a sunflower and leaf type of theme with the patterning this time and I think its worked out really well. I'll be working on painting him for the next couple of days so the photo post will be out in a day or so.
Thanks for subscribing,
Harley
Just a quick photo update, Pascal is all...
2023-04-02 02:06:01 +0000 UTC
View Post
Some fun little Minnie & Mickey dog tags for the Disney Dogs out there. I made these for the Printables dog tag contest but they could also easily work as keyrings.
Pascal WIP out shortly, See you in the next post
Harley
2023-04-02 01:14:14 +0000 UTC
View Post
Decorate every inch of your Kingdom with this beautiful Corona Crest, both clean and patterned versions available to download below. I printed mine support free using my standard settings in Gold PLA at 15cm wide.
Next out will be the Pascal WIP, see you in the next post
Harley
2023-03-30 07:03:00 +0000 UTC
View Post
Pascal appears in Disney's 'Tangled' as Rapunzel's pet chameleon. His role in the film is to be Rapunzel's best friend, confidant and self appointed protector. Pascal doesn't speak but communicates through a broad range of facial expressions and body gestures, since he is a chameleon he can change colour, usually to express his mood or to hide.
I've chosen to model the picture above for Pascal as its probably his signature pose...
2023-03-29 22:45:08 +0000 UTC
View Post
A sinister twist on the Disney 100 platinum ears, these ears are dripping with poison and sure to turn some heads, whether you're at Disneyland or just out on the town! and after a long day of villainy, hang up your ears on the matching headband holder, also available to download below.
I wasn't going to release these yet but I really like how they turned out so it felt a shame not to post them at all. The headband still needs some work but I've attached the individual pieces below read...
2023-03-29 22:41:27 +0000 UTC
View Post
Busted buttons and bows, the first of our Patron Picks models out this month was Minnie Mouse, chosen by the lovely Nicole. I decided to fit Minnie around the already made Mickey Model in the collection, since they come as a pair and will more likely be printed together. This influenced a lot of decisions with the model like filling in her eyes to match the sketch I based Mickey on. I would have included pupils like in her original image but the models would have looked super weird side by si...
2023-03-28 01:19:35 +0000 UTC
View Post
