Ornamental Minnie is now available to download below! she shouldn't have any issues printing on either Resin or FDM, although finer details such as her eyelashes probably won't survive on FDM. I printed Mickey at 12cm tall and Minnie is 13cm to account for her bow.
RESIN
45 DEGREE ANGLE
DENSITY 75 PERCENT
RAFT SHAPE SKATE
FDM
LAYER HEIGHT 0.2
INFILL AT 20 PERCENT
STANDARD SUPPORTS
... 2023-03-23 04:46:33 +0000 UTC View Post
Minnie is now available to download below! I'm happy to say the test print ran without any issues and she stands perfectly, so she shouldn't have any issues printing on either Resin or FDM, although finer details such as her eyelashes probably won't survive on FDM.
RESIN
45 DEGREE ANGLE
DENSITY 75 PERCENT
RAFT SHAPE SKATE
FDM
LAYER HEIGHT 0.2
INFILL AT 20 PERCENT
TREE SUPPORTS
G...
2023-03-19 00:50:58 +0000 UTC View Post
Minnie is finally all patterned and ready to be printed, I really like how the patterns have turned out, I made another gem style shape on the back of her head similar to the Yzma model, which I think suits her really well. If I have time I'm planning on painting this to look like an actual gem to experiment with it a little more, since I might end up using this on more of the future models. I'm really happy with the Minnie models so far and I'm so excited to see the painted models next to Mi...
2023-03-16 18:04:01 +0000 UTC View Post
Surprise your magical Mom this Mother's Day with this unique and stylish Minnie inspired Mom sign, now available to download below. I printed mine in red PLA using my standard settings and painted it with Arteza metallics. Each letter is freestanding and can be printed support free in about 2 hours when placed flat on the build plate. So in just a few hours you can have yourself a thoughtful and personalized gift suitable for any occasion to celebrate the special mom in your life.
A character that really needs no introduction, Minnie Mouse is Mickey's long time love interest known for her sweet disposition, large head bows, and polka-dotted dresses. Minnie first appeared alongside Mickey in Disney's infamous Steamboat Willie short, released in November 1928 and has appeared in many Disney adaptations since, in film, TV and games.
I've chosen to model Minnie as in the picture above as I wanted a pose that represents her sweet and kind personality,...
2023-03-14 17:46:17 +0000 UTC View Post
This month on the page is the first of our Patron Picks, where I'll be modelling characters chosen by 2 of our lovely Patrons! We've got a couple of amazing choices lined up, starting off by adding the one and only Minnie Mouse to the collection and ending the month with Pascal from Tangled. I've also got some awesome extras coming to go alongside them.
Mothers Day is right around the corner and I've got some fabulous Minnie themed gifts in store, beginning with a lovely floral wall pla...
2023-03-13 22:26:49 +0000 UTC View Post
This month we celebrated Villaintine's on the page with a bunch of sinister surprises for that special someone. To start off I released the first model from my new ongoing collection of rose models with Mickey, and the next magical item was added to the collection with the Evil Queens Heart Box, complete with a decorative poison apple heart to go inside!
Next I made a box of poison apple chocolates as a tasty unique treat and released the Minnie rose decoration to acc...
2023-03-12 03:44:55 +0000 UTC View Post
Our next character model may look plush and huggable on the outside but inside he's a monster, ...that smells like strawberry's! Lots o' huggin bear is now available to download below.
I've been busy hand placing individual pieces of fur on this fluffy nightmare these past few days as well as being insanely ill, but Lotso is finally all done and the test prints have come out perfectly, he has no fine or difficult areas so you shouldn't have any problems printing o...
2023-03-11 18:56:30 +0000 UTC View Post
Ornamental Lotso is now available to download below! I had to redo all his fur so its took a little longer than expected but I'm really happy with the end result, he looks awesome, the prints have come out beautifully and this project is definitely a labor of love.
To print him in resin I placed 2 large drain holes in his feet to prevent suction issues. He has no fine or difficult areas so he shouldn't have any problems printing on either resin or FDM.
RES...
2023-03-07 03:26:05 +0000 UTC View Post
Lots o' huggin bear gives you lots of hugs and lots of love and lots of fun no matter where you are, all he wants is a little love and he'll be your friend forever! Download him below, today!
I've been busy hand placing individual pieces of fur on this fluffy nightmare these past few days as well as being insanely ill, but Lotso is finally all done and the test prints have come out perfectly, he has no fine or difficult areas so he shouldn't have any problems printing on either resin or...
2023-03-04 03:02:07 +0000 UTC View Post
The patterns are now all finished on the Lotso model. I'm currently trying to incorporate his fur between the patterns because I really like the way it looks on the clean variant, I'm not sure if this will just make the patterns disappear into the model so I'll have to test it out first but I'll update the page later with the result. Either way ornamental Lotso will be out on the page later tonight, hopefully with fur!
Thanks,
Harley
2023-02-27 18:35:45 +0000 UTC
View Post
Lotso is the main villain of Disney's Toy Story 3. He is the self appointed warden for Sunnyside daycare, which he runs like a prison for toys. His main goal in the film is to keep control over Sunnyside and to make the other toys suffer like he has in the past.
I really like Lotso he's a good villain and his backstory is heartbreaking. He doesn't really have an abundance of poses to choose between so for the model itself I've decided to make him look evil to highlight ...
2023-02-25 19:18:41 +0000 UTC View Post
Next is the second model from our new mini collection, the Minnie Rose Head, now available to download below.
This will be a short run of models featuring some all time Disney favourites that will be released over the next few months to go alongside our character models. They've made great bedside table decorations but they would also be suited for pretty much anywhere around the house and are sure to add a romantic flare to any setting. The next rose model for th...
2023-02-24 22:44:11 +0000 UTC View Post
Next of our Villaintine's sinister surprises is the wickedly tempting poison apple chocolate box. Available to download below is everything you will need to fully assemble the box and chocolate mould tray, just add food safe silicone and you're ready to start casting your chocolates!
With this box the real temptation lies within, so whether you're looking to surprise a special someone with a unique and personal gift, or treating yourself to a wicked indulgence, these chocolates are sure...
2023-02-24 02:41:55 +0000 UTC View Post
To celebrate Villaintine's day itself I added the second magical item to the collection with the Evil Queen's Heart Box featured in Snow White. I decided to print both of my models in PLA this time because I think FDM is much better suited for inorganic stuff like this. Both prints came out amazingly, some of the patterns the printer has left behind look like wood grain or fancy borders which has given the models a really nice overall texture.
2023-02-23 15:32:47 +0000 UTC
View Post
A little more work than expected but the ornamental heart box is now available to download below. Again, all you need to do is insert a small piece of filament into the center of the hinge and it will act as a pin to hold everything in place. I used the same settings as with the box to print the heart but instead added tree supports.
RESIN
45 DEGREE ANGLE
DENSITY 75 PERCENT
RAFT SHAPE SKATE
FDM
L...
2023-02-19 02:26:25 +0000 UTC View Post
Happy Villaintine's! The heart box and poison heart are now available to download below. I've checked the hinges and sword and they all fit together perfectly, all you need to do is insert a small piece of filament into the center of the hinge and it will act as a pin to hold everything in place. Apologies for the delay on this one, but I don't want to release stl's that I haven't checked first and Its such a big print, the lid alone took 18 hours on FDM. It looks amazing though, I'm so happy...
2023-02-16 15:19:14 +0000 UTC View Post
The fancy box is all finished and will be out shortly! I really love the way the patterns have worked out on this one, it looks really nice and just really suits the style. It was also pretty easy for a nice change so massive bonus there! I'm really excited to see this one finished and painted and see how it compares to the clean variant.
I'm just working on the renders now so the ornamental box will be up on the page in about an hour.
Thanks, <...
2023-02-15 01:40:08 +0000 UTC View Post
The heart box features in snow white as a possession of the main Villain, the Evil Queen. She gives the box to the huntsman and instructs him to kill Snow White and bring her heart back inside the box. Unable to carry out the evil act, he chooses to spare her life and places a pig's heart inside the box in an attempt to trick the Evil Queen instead. Fun fact, the camera is always angled so that the pig heart itself isn't visible, due to its graphic nature.
So naturally I'm making a hear...
2023-02-15 00:36:10 +0000 UTC View Post
Loved by some and dreaded by all, it's February and Valentine's day is fast approaching! but don't worry I've got you covered with everything you'll need to delight your dark-hearted loved one into giving you true love's first kiss. This month we're celebrating Villaintine's day on the page and since we all know one day isn't enough to show how much you care, I've got a bunch of sinister surprises lined up, from head-shaped flowers to poison chocolates and even a tyranni...
2023-02-11 00:37:04 +0000 UTC View Post
It's been a busy start to the year on the page with 3 character models out this month as well as a bunch of extras to go along with them! We began the month by adding the first of our wickedly wonderful villains to the collection with one of my personal favourites, Lucifer the cat. We then ended the month by adding another contemptible cat, Yzma, complete with the extract of llama potion vial.
Also on the page this month we celebrated Chinese New Year in style with the almighty Mushu an...
2023-02-10 03:02:34 +0000 UTC View Post
The poison, the poison for Kuzko the poison chosen especially to kill Kuzko, Kuzkos poison, available to download below! There's an embossed version (shown in the photo) which requires painting the label or a blank version where you can print off the paper label and glue it on for a more authentic look. To print mine I used transparent resin which I then sprayed with clear gloss lacquer and painted with black and white acrylic.
To make the extract of llama potion just add a few sm...
2023-02-10 00:22:31 +0000 UTC View Post
What better way to describe the next fiendish feline added to the collection this month, Cat Yzma. She first appears as a large and sinister black and pink entity, only to then be revealed as a tiny and adorable purple kitten, so for the clean variant I decided to base her colour scheme on this scene.
To paint her I used Daler Rowney system 3 acrylics in black and fluorescent pink. I then sprayed her with gloss lacquer to give her a nice shiny finish. To make the poison vial's I used tr...
2023-02-09 01:48:39 +0000 UTC View Post
Yzma is all finished and ready to be printed both with and without the poison vial. The test prints worked perfectly so she shouldn't have any issues on either resin or FDM, although thinner areas such as her whiskers probably won't survive on FDM.
RESIN
45 DEGREE ANGLE
DENSITY 75 PERCENT
RAFT SHAPE SKATE
FDM
LAYER HEIGHT 0.2
INFILL AT 20 PERCENT
STANDARD SUPPORTS
GYROID PATTERN
Yzma is attached below and ready to print both with and without the vial attached, for those who want to print it in a different material I've included the files separately. The test print came out perfectly with no issues so she will print fine in either resin or FDM, although thinner areas such as her whiskers probably won't survive on FDM.
RESIN
45 DEGREE ANGLE
DENSITY 75 PERCENT
RAFT SHAPE SKATE
FDM
<... 2023-02-04 00:33:23 +0000 UTC View Post
Ornamental Yzma is all finished and will be up on the page in the morning providing there's no issues with the test print. The photo post and extract of llama will be out shortly afterwards!
Thanks,
Harley
Yzma is all finished and the test print is currently running, I'm quite excited to see this one put together with the little poison vi...
2023-02-03 12:08:42 +0000 UTC View Post
Yzma appears as the main villainess in the Disney animated feature 'The Emperor's New Groove'. She is an evil sorceress who's only goal in the film is to become empress by attempting to kill emperor Kuzko, instead she accidentally turns him into a llama with a potion. Towards the end of the film another potion vial is accidentally broken which changes yzma into a cat,
I've chosen to model the above pose of her holding the potion bottle as I feel this is her most i...
2023-02-03 08:04:01 +0000 UTC View Post
Mushu takes up the incense burner mantle for one last time in our final Chinese New Year model now available below.
To assemble, glue the model onto the base ensuring his hand is facing forwards, then place a direct-burning incense stick in his left hand and light to fill the room with the relaxing fragrance of your choice. This was a last minute idea but has turned out to be a lovely little addition to go alongside the zen garden.
I also ended up making an adapte...
2023-02-03 02:49:16 +0000 UTC View Post
Your serpentine salvation is at hand with our beautifully articulated Mushu, now available below.
He's really flexible, lots of fun to play with and makes an awesome decoration for Chinese New Year! I printed mine in gold PLA using my standard settings with a brim enabled and supports touching the build plate. I'm already planning Ka the snake and maybe even Flotsam and Jetsam at some point too!
See you in the next post, 2023-02-02 16:54:26 +0000 UTC View Post
Add a little peace and tranquility to your home with this beautiful Mulan inspired zen garden in honour of Chinese New Year. Available below is a mini sand rake, Mushu's gong and stand, a yin yang decorative tray and a frame to hold it all together. Just add some sand and you're ready to go, or to create a more natural element to the garden you can also include water, rocks or even miniature trees. Made for meditation, it really does bring a calming atmosphere to any room and measuring only 2...
2023-02-01 00:44:13 +0000 UTC View Post