The Staff is now all ready to download below! It's based on the original staff carried by Maleficent in the 1959 animated movie. There's 2 versions of the staff available in both basic and patterned variants, There's a Cosplay version, which when fully assembled measures 5 ft tall and a miniature collectible sized version which measures 32cm, and is roughly the same size as our mini trident.
The mini staff prints in 2 parts and is connected by a small peg in the centre, for the pa...
2023-10-27 02:44:59 +0000 UTC
View Post
Everybody loves a pumpkin spiced latte at Halloween, so why not spice it up a little more with these wonderfully wicked pumpkin coasters, now available below. Each pumpkin prints in about 3 hours with no supports required, they're available as solid 10cm coasters or hanging decorations, with a hole cut through the top for easy assembly.
I printed mine using black and orange PETG with a colour change in the middle. To do a colour change on a standard FDM printer, open the model in Prusa ...
2023-10-24 23:44:53 +0000 UTC
View Post
If you want Halloween decorations that are out of this world grab yourself the Angel and Stitch jack O' lanterns, now available to download below. Both print in one piece and can then be placed on top of any battery operated tea light to create some adorably spooky jack O' lanterns, perfect for celebrating this spooky season!
They're quite big prints so I'll have some photos of the printed models up in a few days. Next I have a couple more print in place decorations for you, fol...
2023-10-24 03:53:30 +0000 UTC
View Post
Marie, Toulouse and Berlioz are showing off their costumes in the next of our Halloween models, now available below. A spooky twist on the traditional monkey's, these adorable kittens will remind you to see, hear & speak no evil this Halloween! The model prints in one piece, can be freely resized and, with the exception of their whiskers, should print fine on either resin or FDM.
Short and sweet but I've got a few more Halloween treats for you to come throughout today before...
2023-10-23 13:04:27 +0000 UTC
View Post
It's officially Halloween on the page and I have lots of spooky surprises lined up for you, starting off with some nice and easy, print in place Minnie & Mickey spiders web decorations, now available to download below!
This month we'll be adding Maleficent's pet Raven, Diablo, to our character collection, alongside mini and full sized cosplay versions of Maleficent's staff. I'll also have an adorable 'see no evil' Aristocats sculpt, as well as a couple more print in place decoration...
2023-10-15 13:34:51 +0000 UTC
View Post
This month was Patron picks and we've added some awesome new characters to the collection with, Cinderella's Jaq, the loveable Eeyore, Princess and the Frog's, Ray and Fantasia Mickey.
We also added lots of extras to the page with the Enchanted Mirror spoon tray, the glass slipper sculpt, which was probably my favourite of this months models, the Shadow Man Talisman and cupcake jar and finally the Enchanted Broom as our next magical item.
If you're a Patron as always thank...
2023-10-15 13:33:58 +0000 UTC
View Post
Reality meets fantasy in the Mickey Fantasia diorama, now available to download below. The model prints in one piece on either Resin or FDM, but I've also included Fantasia Mickey as a separate STL for those who want him as a standalone model.
Mickey was chosen by Ayden who suggested, since he was the first model I made for our character collection, I should make another one a year later to see my progress. I really loved the idea and I'm really happy with the result, it was a good chal...
2023-10-14 03:36:26 +0000 UTC
View Post
The next enchanting addition to our Magical Item collection is the iconic Fantasia broom from Disney's artsy masterpiece, Fantasia. Both clean and decorative versions are now available to download below, I printed mine at 10cm tall which makes it a little smaller than our Mickey model. The broom has no thin or fine edges so it should print fine on either Resin or FDM, with a small drain hole placed underneath each bucket to prevent suction issues.
RESIN
2023-10-06 22:00:19 +0000 UTC
View Post
Entice your friends on the other side with the next of our Villainous cupcakes inspired by Dr. Facilier, now available to download below. The cupcake prints in 2 halves which lock together to create a lovely trinket box, perfect for storing small items such as beads or even cake decorating supplies!
To keep the cupcake sizes consistent I decided to match the cases to each other and printed my Shadow Man cake at about 9cm tall, which proportionally fits perfectly next to the evil q...
2023-10-05 17:00:16 +0000 UTC
View Post
As a happy surprise this month our next character was Disney's one and only depressed donkey Eeyore! He was always my favourite character in Winnie the Pooh when I was younger, although I feel I relate a lot more to Rabbit these days, nonetheless Eeyore is a welcome relief among Disney's cast of insanely optimistic characters, and great at delivering the message its ok to not be ok.
To paint Eeyore I used Valejo Gunmetal for his main colour and Silver for his snout and underside. I used...
2023-10-01 14:42:33 +0000 UTC
View Post
The ornamental version of Eeyore is now ready to download below! I printed him at roughly 10 cm tall which makes him a nice fit in proportion with our Winnie the Pooh model. It was a fairly straightforward print with a drain hole placed on each foot for suction and drainage purposes. He also doesn't have any thin or fine areas so he should be fine printing on either Resin or FDM.
RESIN
45 DEGREE ANGLE
DENSITY 75 PERCENT
FD...
2023-09-30 19:33:26 +0000 UTC
View Post
Eeyore is now ready to download below! I printed him at roughly 10 cm tall which makes him a nice fit in proportion with our Winnie the Pooh model. It was a fairly straightforward print with a drain hole placed on each foot for suction and drainage purposes. He also doesn't have any thin or fine areas so he should be fine printing on either Resin or FDM.
RESIN
45 DEGREE ANGLE
DENSITY 75 PERCENT
FDM
LAYER HEI...
2023-09-30 00:23:00 +0000 UTC
View Post
Eeyore is a pessimistic and gloomy old stuffed donkey belonging to Christopher Robin in Disney's Winnie The Pooh. He goes on adventures in the Hundred Acre Wood along with his friends, but he spends most of his time searching for his tail, which he loses constantly.
I based my model on the original non-smiling Eeyore because there's something a little off about seeing him smile. I wanted to incorporate his sad personality along with him looking for his tail because thes...
2023-09-29 23:45:13 +0000 UTC
View Post
Hi all, there's been a slight change of plan to our schedule this weekend, my computer has finally decided to give up the ghost and I can't get it fixed until Monday, but luckily I have a laptop and a spare model on hand! so in the meantime I'll be releasing a bonus character model of everyone's favourite Disney donkey, Eeyore! with the rest of this weeks models to follow next week instead.
I'm really sorry for anyone waiting on the models, sometimes delays can't be helped but I should ...
2023-09-29 18:27:52 +0000 UTC
View Post
Our latest model for Patron Picks was everyone's favourite Cajun firefly, Ray! chosen by Aleia. This has been one of my favourite sculpts to date, he's such a fun character and definitely the bravest model I've attempted so far, but thankfully he printed looking awesome and I'm really happy to add Ray to our collection.
To paint my model I started with a base coat of Valejo paints followed by a topcoat of Arteza metallics. I mixed Escorpena Green with White for Ray's head, arms an...
2023-09-28 01:13:33 +0000 UTC
View Post
Ornamental Ray is now all finished and ready to download below. I printed him solid at 8 cm tall which makes him a nice small size to fit in with the rest of the models. He is basically built of fine areas so I'm not sure how well this will hold up on FDM but you may have some success using a 0.2 nozel if you upscale him to a larger size.
RESIN
45 DEGREE ANGLE
DENSITY 75 PERCENT
FDM
LAYER HEIGHT 0.2
IN...
2023-09-23 14:05:16 +0000 UTC
View Post
Sorry folks technical difficulties, but Ray is now all finished and ready to download below. I printed him at 8 cm tall which makes him a nice small size to fit in with the rest of the models. He is basically built of fine areas so I'm not sure how well this will hold up on FDM but you may have some success using a 0.2 nozel if you upscale him to a larger size.
RESIN
45 DEGREE ANGLE
DENSITY 75 PERCENT
FDM
LA...
2023-09-22 02:27:01 +0000 UTC
View Post
Deco Ray is all done and will be up on the page shortly! his arms and legs were too thin to decorate but they've left some nice clean areas to break up the patterns, he's come out really nicely and I'm quite excited to see the finished model! photos will be out later on.
See you in the next one,
Harley
Just a quick pho...
2023-09-20 22:20:22 +0000 UTC
View Post
Ray is the wonderfully whimsical Cajun firefly who is in love with the evening star Evangeline in Disney's Princess and the Frog. He makes it his mission to help Tiana and Naveen but his one dream mentioned in the film was to someday unite with his love.
For the model I've chosen the pose above because I think he'll stand really nicely and that was always going to be a major challenge with this model, due to his shape. In true Ray fashion I'm going to give him a happy e...
2023-09-19 22:04:52 +0000 UTC
View Post
Tired of living on the margins? While all those fat cats in their fancy cars don't give you so much as a sideways glance? shake a poor sinner's hand and download the Shadow Man Talisman below!
To print the talisman I used wood PLA, which held the paint nicely in the grooves and helped to create the real wood effect, for the teeth I printed them in white PLA, facing upwards on a slight angle to avoid support marks on the back. It's a really easy print with both parts printed in under 2 h...
2023-09-19 20:36:00 +0000 UTC
View Post
Inspired by Cinderella's infamous sewing scene, the glass slipper sculpt is now available to download below.
Lovingly crafted by Cinderella's animals in a beautiful low poly style to give it a real glass appearance, it'll make the perfect decoration for whoever it fits! The slipper prints in one piece with a good amount of supports needed due to the heel patterns, therefore resin would be the recommended print material although it wouldn't be impossible for anyone...
2023-09-18 22:33:58 +0000 UTC
View Post
Our first character model this month was Cinderella's lead mouse Jaq, chosen by Sarah and her niece. I've been really excited about getting the 3 part model finished for ages so this one has been long overdue! I think he's worked out pretty well despite his pose being more subtle than usual, he looks really cute and he fits in nicely with the scene alongside Gus. The renders of all 3 models are looking awesome so far! check the Jaq Wip post for a sneak peak, but I absolutely cannot wait to se...
2023-09-14 18:36:45 +0000 UTC
View Post
The patterned version of Jaq is now available below! He should print fine in resin but there may be a few problem areas on FDM like his whiskers, which probably won't survive unfortunately. Any questions or issues just let me know!
RESIN
45 DEGREE ANGLE
DENSITY 75 PERCENT
FDM
LAYER HEIGHT 0.2
INFILL AT 20 PERCENT
TREE SUPPORTS
GYROID PATTERN
220 NOZZEL TEMP
60 B...
2023-09-13 12:04:56 +0000 UTC
View Post
The first version of Jaq is now available below! He should print fine in resin but there may be a few problem areas on FDM like his whiskers, which probably won't survive unfortunately. Any questions or issues just let me know!
RESIN
45 DEGREE ANGLE
DENSITY 75 PERCENT
FDM
LAYER HEIGHT 0.2
INFILL AT 20 PERCENT
TREE SUPPORTS
GYROID PATTERN
220 NOZZEL TEMP
60 BED T...
2023-09-12 16:43:26 +0000 UTC
View Post
All 3 parts are finally all finished, it looks insane so far and I'm really happy with it, its come out exactly how I wanted and I can't wait to put all 3 prints together and get some pictures. I have to reprint Gus because he's way too big and finish off painting my massive 19cm long Lucifer but pics of all 3 will be out when I've finished them all.
For his body it was a whole lot o...
2023-09-12 16:41:35 +0000 UTC
View Post
Jaq is Cinderella's main mouse and leader of the house Mice in the animated feature Cinderella. He is mischievious, smart and brave and his main goals in the film are to avoid the cat and help Cinderelly who he cares for deeply.
Jaq is the 3rd and final part of my 3 part model alongside Gus and Lucifer. The idea was to have them acting out the bead scene from the film and have Lucifer sneaking up behind them. I also wanted them to work as standalone models, so I chose G...
2023-09-09 01:52:15 +0000 UTC
View Post
The next enchanting addition to our tea set is now available to download below. A nice and easy print to start off the month, the tea spoon tray prints in one piece in roughly 2 hours and measures about 15cm, which is a little bigger than a standard teaspoon. It can also be resized to fit larger utensils if you like such as spatula's or a wooden spoon holder. I've also made a cute little decorative spoon to go with it as part of the tea set, this measures about 12cm and takes roughly 45 mins ...
2023-09-07 14:36:37 +0000 UTC
View Post
This month we'll be celebrating 1 whole year of PoisonApplePrints! so I'll be handing the page over to you guys for another Patron Picks month and this time we've got 3 awesome characters lined up!
We'll be adding Cinderella's Jaq, Princess and the Frog's Ray and finally, alongside the launch of PoisonApplePrints.com at the end of the month, I'll be making a special model of Fantasia Mickey! I'll also have a bunch of awesome Disney inspired extra's for you with a useable enchanted mirro...
2023-09-05 16:57:54 +0000 UTC
View Post
On the menu this month we added lots of food themed files to the page, starting off with the Poison Cupcake as the first model in our latest ongoing mini collection, we also added little chef Remy as our first character model of the month.
Next, we made some Alice inspired Eat Me cookies along with a beautiful cookie box, followed by the awesome Pizza Planet Hammburger and Mr. Potato Fries, which were easily my favourite models of the month!
Finally we added our latest chara...
2023-09-04 12:35:22 +0000 UTC
View Post
The Fantasia ice cream is now available to download below.
Part of the magic of this model is that its fully customizable, you're free to paint it however you like! It's an easy print, prints in one piece and there's no thin or fine areas so it should print fine on either resin or FDM!
See you in the next post,
Harley
2023-09-03 22:55:58 +0000 UTC
View Post
