Once again, Russia has proved that it is a terrorist country. It was not enough for them to launch drone and missile attacks every night, and today, during another missile attack at the night, they committed another terrorist act. At about 2:30 AM, russian occupiers blew up the dam of the Kakhovskaya hydroelectric power station. As of now (9:45 AM), people are being evacuated from nearby areas, and there is no water in many settlements (including my region). In the long term, there is a significant threat to the Zaporozhye Nuclear Power Plant, which is also under Russian occupation, and the consequences of such a terrorist acts will affect not only my country.
As for me, there is no need to evacuate my region yet. But we are ready for any turn of events.
https://www.youtube.com/shorts/0xAx3XQr0SY
2023-06-06 07:03:57 +0000 UTC
View Post
Permanent link to all my DAI Mods in one archive, including tutorials. Just in case.
https://drive.google.com/file/d/1vqkMawqQFPXBhvCwo1MowgP9Mn10ZeL1/view?usp=share_link
2023-03-23 12:01:35 +0000 UTC
View Post
Due to recent news that patreon will require age verification for adult content (and Patreon considers any minimally exposed part of the body to be adult content, unfortunately) by providing personal/passport details through a third party app, and also due to the fact that some accounts of Ukrainian volunteers (who collected humanitarian, not military aid) were banned without an objective explanation of the reasons (and at the same time not ban russian accounts for the same actions or for collecting military aid), I decided not to post anything here anymore.
I will not remove anything of the old content from here, until my account get banned too or deleted or else, because I do not want to give my personal data to third-party apps. I re-saved all my old mods to google drive and will post them somewhere else (just need to find the right place to do it). I will update information on patreon (if I not get banned before it) and on nexus both.
I wanted to say that I did not abandon my work, and I will continue to make new mods soon. Because of the shelling of thermal power plants and other critical civilian infrastructure we lived with almost no electricity almost all winter, but now the situation is stable.
I would also like to thank each country and each of its inhabitants separately for helping us survive all this horror.
So i ask you to unsubscribe from my patreon and don't follow it anymore. I will be grateful if you suggest me any options where I can transfer my mods and post future works without fear that one day the site administration will begin to introduce some restrictions and do any shitty things.
2023-03-22 15:05:32 +0000 UTC
View Post
The day came when I finally got the courage to share my two (old) tutorials with everyone. Yeah, they’re pretty outdated, and some things don’t need to be done or they are done a little differently than before. But the important thing is, it doesn’t affect the end result, right? Maybe some things can be made easier, but that’s how I do it.
In these tutorials I give information on how to make a port and animation of the head in Skyrim (actually, in any Bethesda's games). For Fallout 3\4\NV the process in Blender is about the same, there will be only small differences in the work with Creation Kit or GECK.
These tutorials were created by countless personal mistakes, experiments, sleepless nights and information search. I tried to make these tutorials understandable for people who were just beginning to be interested in modding, or would like to port the head of their favorite character in Skyrim. Yeah, it is the text and pictures, 'cause it’s easier for me, than to stop video every time. In case someone will want to make a video from this tutorial, you're welcome.
"Main" file describes the whole process step by step.
"Textures" - the way I adjust the texture of the head to the texture of the body. As an example I used SAM Light textures addon, which can be downloaded here
Notice (1) - also textures of neckseam could be baked in the "Bake" tab of Blender (instead of the way described in this tutorial).
Notice (2) - there is no need to make .tri files for hair, just remove any .tri files in Creation Kit in the tab of your hair and it will not deform in any strange ways.
2022-12-04 20:50:18 +0000 UTC
View Post
This mod will add Dorian as Follower and as Custom Race to your Skyrim. You can find him in the Arcanaeum (College of Winterhold).
There are two folders in the archive
* Main - contains all you need to have Dorian in your game.
* Optional - there are two textures (diffuse and normalmap) if you want to patch the neck seam of another body textures in Photoshop or Gimp.
If you want to install another body, just drop meshes and textures to correct folders (and do not forget to patch your new textures to avoid neckseam):
meshes to meshes\actors\character\DARacesSky\Dorian\Body
textures to textures\Actors\DARacesSky\Dorian\Body
Requirements
*Skyrim and all DLCs.
*Race compatibility mod.
Optional (but not necessary):
- RDO, if you want another voice for her.
- Any follower framework (AFT, UFO etc).
If you'll find any issues (especially with SE version), let me know
2022-11-10 19:18:32 +0000 UTC
View Post
This mod will add Cassandra as Follower and as Custom Race to your Skyrim. You can find her in Solitude near the entrance of the Blue Palace.
There are two folders in the archive
* Main - contains all you need to have Cassandra in your game.
* Optional - there are two textures (diffuse and normalmap) if you want to patch the neck seam of another body textures in Photoshop or Gimp.
If you want to install another body, just drop meshes and textures to correct folders (and do not forget to patch your new textures to avoid neckseam):
meshes to meshes\actors\character\DARacesSky\Cassandra\Body
textures to textures\Actors\DARacesSky\Cassandra\Body
Requirements
*Skyrim and all DLCs.
*Race compatibility mod.
Optional (but not necessary):
- RDO, if you want another voice for her.
- Any follower framework (AFT, UFO etc).
Armor on screenshots (not included in the mod) - DX Dark Knight Armor
SE version is in beta (I tested it in my game and it works fine). If you have any problems with it, then just convert LE version yourself.
2022-07-07 21:03:39 +0000 UTC
View Post
This mod will add Varric as Follower and as Custom Race to your Skyrim. You can find him at Candlehearth Hall (second floor) in Windhelm. He wear his default clothes from Inquisition + earrings and has custom height.
There are two folders in the archive
* Data - contains all you need to have Varric in your game.
* Optional - there are two textures (diffuse and normalmap) if you want to patch the neck seam of another body textures in Photoshop or Gimp.
If you want to install another body, just drop meshes and textures to correct folders (and do not forget to patch your new textures to avoid neckseam):
meshes to meshes\actors\character\DARacesSky\Varric\Body
textures to textures\Actors\DARacesSky\Varric\Body
Requirements
*Skyrim and all DLCs.
*Race compatibility mod.
* XPMSE
Highly recommended:
Size does matter - if you want to prevent him from scaling in poses and idles.
Optional (but not necessary):
- RDO, if you want another voice for him.
- Any follower framework (AFT, UFO etc).
If you have any bugs with him - let me know. Also his clothes and necklace support the weight slider (in a test mode), but may have issues.
2022-06-01 08:01:02 +0000 UTC
View Post
I'm back to modding. I will make new mods as soon as possible and when have free time (which is never enough), and also when that damn siren isn’t howling. Thanks everyone for support <3
Повертаюсь до моддінгу, нові моди буду робити по можливості та за наявності вільного часу (якого завжди бракує). А також коли не виє ця клята сирена. Усім дякую за підтримку <3
2022-05-29 17:41:04 +0000 UTC
View Post
Mods creation stopped until the end of the war in my country (Ukraine). Thanks for understanding.
2022-03-01 11:05:02 +0000 UTC
View Post
I decided to step a little from making followers for a while. Now it's time for some DAI props. All items are static (except of bed).
What you can find in the archive:
Astrarium; Halla statuette; Redhart statue; Dreadwolf statue; Elven statues of wolwes (left and right directions); Ocularum (Skull and Base pillar); Inquisitor's bed (usable, at this moment only one variant); Blackwall's griffon; Inquisition book; Red lyrium in three variations.
Also there is an esp file, if you really need it.
Mod will be updated with new items over time.
2022-02-11 13:19:07 +0000 UTC
View Post
Hello guys, I have two news.
Bad one - my almost-elleven-years-old laptop died. It means my new mod and some other stuff was lost (I hope it’s temporary). I don't know when I would be able to take my laptop to a service center. Probably, it will be next month.
Good one - I will be able to continue my work on another laptop for a while. I need some time to recover all the software and games I need. Modifications will be released less often and without good screenshots. I apologize for this inconvenience.
2022-01-27 15:49:58 +0000 UTC
View Post
I always wanted to have Thranduil's crown in my Skyrim, and now I finally have it. As well as his hair, actually. My first made-from-scratch project.
Designed to work with custom hair mesh mostly, but I adapted it to vanilla and other modded hairs too. Works good on both males and females characters.
"Thranduil's crown" - for custom hair mesh. Also looks good on some short and thin hairs.
"Thranduil's crown (van)" - for vanilla and thick hairs. Tested with Apachii hair mod.
Thranduil's hair - custom hair mesh and textures. Still need a lot of work, but I decided to share it.
Crown takes 55 slot.
Installation
Drag & drop Data folder to your Skyrim's root directory and activate esp.
Optional folder contains some texture variants for crown (not included in esp file). Default is rough and dark.
- Rough lighter - the same texture, but lighter and less saturated.
- Rough green leaves - rough dark texture with green leaves instead of red.
- Smooth darker - dark and much smoother, than default.
- Smooth green leaves - dark smooth texture with green leaves instead of red.
- Smooth lighter - smooth lighter texture with red leaves.
Requirements:
Skyrim LE.
2022-01-17 23:33:00 +0000 UTC
View Post
This mod will add Morrigan as Follower and as Custom Race to your Skyrim. She is camping in Eldergleam Sanctuary, where you can find her near campfire. She wears Vampire outfit and in addition to spells, she uses unique DAI staff named "Tempest".
There are two folders in the archive
* Main - contains all you need to have Morrigan in your game.
* Optional - there are two textures (diffuse and normalmap) if you want to patch the neck seam of another body textures in Photoshop or Gimp.
If you want to install another body, just drop meshes and textures to correct folders (and do not forget to patch your new textures to avoid neckseam):
meshes to meshes\actors\character\DARacesSky\Morrigan\Body
textures to textures\Actors\DARacesSky\Morrigan\Body
Requirements
*Skyrim and all DLCs.
*Race compatibility mod.
Optional (but not necessary):
- RDO, if you want another voice for her.
- Any follower framework (AFT, UFO etc).
- TDN Vampire armor retexture.
A few words about why I didn't include her DAI clothes. First, I did it. But after two days of unlucky weight paint of her skirt, I gave up, because it stretches in a very odd way.
Second - there are three or four Morrigan clothes for different bodies across the internet. So I see no reason to make another one.
2022-01-10 14:48:43 +0000 UTC
View Post
This mod will add Solas as Custom race and as Follower to your game. He has custom head with facial animation support. Also he can wear clothes from DA:I or Sentinal Armor which presented in two colors - defaul light-brown and black.
You can find Solas in Moorside Inn in Morthal.
There are two folders in the archive
* Main - contains all you need to have Solas in your game.
* Optional - there are two textures (diffuse and normalmap) if you want to patch the neck seam of another body textures in Photoshop or Gimp.
If you want to install another body, just drop meshes and textures to correct folders (and do not forget to patch your new textures to avoid neckseam):
meshes to meshes\actors\character\DARacesSky\Solas\Body
textures to textures\Actors\DARacesSky\Solas\Body
Requirements
*Skyrim and all DLCs.
*Race compatibility mod.
Optional (but not necessary):
- RDO, if you want another voice for him
- Any follower framework (AFT, UFO etc).
2021-12-24 04:00:02 +0000 UTC
View Post
This mod will add Sera as Custom race and as Follower in your game. She has custom head (with face animation support) and standart body (which you can replace to whatever you want). Sera is a rogue and skilled archer, in battle she uses one of my favorite bows - Bow of the Dragon. She can be found in Riften in The Bee and Barb inn.
There are two folders in the archive:
Main - contains main mod.
Optional - there are .png files to patch your custom body textures in Photoshop\Gimp.
If you want to install another body (CBBE, UNP etc.) just drop meshes and textures to correct folders (and do not forget to patch your new textures to avoid neckseam):
meshes to meshes\actors\character\DARacesSky\Sera\Body
textures to textures\Actors\DARacesSky\Sera\Body
Requirements
*Skyrim and all DLCs.
*Race compatibility mod.
Optional (but not necessary):
- RDO, if you want another voice for her.
- Any follower framework (AFT, UFO etc).
v1.1 - Fixed eye reflection.
2021-12-11 22:00:02 +0000 UTC
View Post
I updated Cullen, Iron Bull and Blackwall with FaceGen nifs and textures (those files have not been exported before from CK for certain reasons, which I have already fixed). So, if you downloaded these files before 22/11, please re-download them - it should fix any color mismatches between head and body.
2021-11-22 07:56:11 +0000 UTC
View Post
Blackwall's head port with face animation and weight support. You can find him as follower in Windpeak Inn in Dawnstar. He wears his default armor from DA:I, which consists of two separated parts - coat and breastplate. Coat is presented in 11 colors (brown is default). Armor has no weight slider.
There are two folders in the archive
* Main - contains all you need to have Blackwall in your game.
* Optional - there are two textures (diffuse and normalmap) if you want to patch the neck seam of another body textures in Photoshop or Gimp.
Blackwall uses standart Skyrim's body and vanilla textures (with patched neck seam). If you want to use your own body meshs and textures:
- Place your body meshes in meshes\actors\character\DARacesSky\Blackwall\Body
- Place your body textures in textures\Actors\DARacesSky\Blackwall\Body
Requirements
*Skyrim and all DLCs.
*Race compatibility mod.
Optional (but not necessary):
- RDO, if you want another voice for him
- Any follower framework (AFT, UFO etc).
v1.1
- Added Griffon shield and Caliban sword.
- Fixed beard and hair transparency when standing too close to light sources.
- Separated hair and beard textures in order to have more control on it's visual appearance (beard looks better with more smooth texture while hair is better with more wavy one).
- Added shield_d.psd to optional folder, if you want to make your own recolor of the shield.
2021-11-13 01:06:06 +0000 UTC
View Post
Iron Bull presented as Custom race and as follower. You can find him in Silver-Blood Inn in Markarth. He has his own body model (with genitalia support & re-textured genitalia's area) and custom height. Also he equipped with axe (Bull's Edge) and his Inquisition's default armor. No weight support.
Possible issues
He is not compatible with any default Skyrim armors/helmets/jewelry etc.
- There are a little (mostly unnoticable) texture seams between feet, body and arms.
- Some body parts may clipping through each other or through the armor in some poses.
Requirements
*Skyrim and all DLCs.
*Race compatibility mod.
Custom Body
Highly recommended - Size does matter - if you want to prevent him from scaling in poses and idles.
How to install
Download main archive (Iron Bull Custom race), and put meshes, textures and esp file to your Skyrim/Data folder. Then download Custom Body patch, put meshes and textures to your Data, confirm file overwriting.
Credits & thanks
All credit for the genitalia's mesh and it's textures goes to the original authors - Vector Plexus and Smurf (original mod)
Groovtama & XPMSE Team for XPMSE
2021-11-02 16:22:16 +0000 UTC
View Post
My new port of Cullen's head for Skyrim with face animation and weight support. You can use him as custom race or as follower in your travels around the Tamriel.
You can find Cullen in Solitude at training yard near Imperial headquarter (see screenshots). He uses standart Skyrim body with vanilla textures, you can replace it with one you like. He also wears his armor from the Inquisition (no weight support for the armor, but it looks good in weight 0-50).
As a bonus, I made a port of Cass' shield and sword for him. I’m not very good at making weapons, but I think my first serious attempt looks pretty good.
There are two folders in the archive
* Data - contains all you need to have Cullen in your game.
* Optional - there are two textures (diffuse and normalmap) if you want to adjust the neck seam of your own body.
Requirements
*Skyrim and all DLCs.
*Race compatibility mod.
Optional - RDO, if you want another voice for him, and any follower framework (AFT, UFO etc).
2021-10-04 09:26:45 +0000 UTC
View Post
