Hello, everyone, it's the big day. vote to choose the next release. You have here several themes which will allow you to vote according to what you prefer.
The end of the vote will be in 24 hours
Le't's go !
(You will have some references attached by theme to be able to think about it.)
DEMONIC Blood Vampire
Werewolfs Warlords
2024-02-03 07:36:50 +0000 UTC
View Post
Hello everyone ,
This video is specially dedicated to the members of our patreon.
In this video there are 4 days of work that were recorded. This was a great figurine that I worked on and I hope you enjoy seeing the whole process.
Don't hesitate if you have any questions, I'll be happy to answer ;)
Cheers
"In the desolate lands of Arcanum, where the remnants of a once-great kingdom stood, a shadowy realm emerged under the oppressive rule of the Red Church. The only solace left to the people was the embrace of their fervent faith, a faith enforced with ruthless brutality.
At the helm of this theocratic tyranny stood the Priestess of the Red Church, a warrior-penitent known for her merciless crusade against non-believers. Her name echoed in whispers, a...
2024-01-31 09:19:26 +0000 UTC View PostHey folks! 🎨
Just dropped a quick speed drawing video featuring our newest mini for February!!
Meet 'The Priestess from the Red Church,' a penitent knight with some serious divine vibes. 🛡️⛪️ Check it out, and let me know what you think In the comment section !
Join us on our social media to miss Nothing !
📸 Instagram: 2024-01-23 16:49:09 +0000 UTC
View Post
Hi everyone, I made a little video for you to show you a little bit of how I work when making the minis.
For this super dragon it will have been long, the passage that I show you is a short passage of 40 min 1 hour I don't really know anymore. where I add little touches to add details.
I hope you like this approach. let me know in the comments ;)
This dragon ...
Hello everyone, I hope you are doing well, work is progressing well here, I'm writing you a little post, to show you the monster which is still in wip but it's arriving for February.
This monster will be on a 110 mm base, it will be very big ^^
The character is not yet done but it's coming there will be wips during the week I hope you like it ;).
If you are interested, do not hesitate to join our discord at this address I post the progress of work quite often h...
hello everyone here is a little wip of the month, This dragon will be the 3rd in the branch of the Winged beast lords saga.
it's a dragon that won't be ridden because the majority prefer a dragon on a base apart from the character, for this one I tried to look in the spikes with good big teeth, because I'm not not done much in this style.
2024-01-12 15:26:34 +0000 UTC
View Post
Hi everyone we have a little coop with our friend Miniatures Blueprint here is his message:
Hello Arcanum Workshop Friends ! !
I am Miniatures blueprint, and i wanted to share with you a cool mini for your tabletop games.
feel free to use it for painting, collecting, or playing ;)
As for me, i am doing a Patreon / Tribes, and also a MMF store, i would love if you could at least take a look to my store to see if my models please your eyes ...
2024-01-11 16:45:17 +0000 UTC View Post
Hello guys here is the discount code for our myminifactory store
"BRUTAL40"
Enjoy ;)
(the picture is a wip of the next beast )
"Once upon a time, in the dark lands of Arcanum, there was a feared warlord, Malkeltis, once known for his wisdom and strategic prowess. However, the course of his destiny took a dark turn upon the discovery of an ancient and malevolent artifact.
Deep within the black mountains, Malkeltis found a mystical jewel, an obsidian gem harboring ancient and corrupted powers. Drawn by the promise of infinite power, he seized the artifact, ignoring the whispe...
2024-01-01 17:29:50 +0000 UTC View Post
Hi everyone here is the preview of the models that will be released next month!!
Another winged mount and its lord.
We continue on our launch of the saga on the winged beasts.
in this 2nd part I wanted to present to you something more massive and raw.
our dragon is a ferocious beast that seeks to devour soldiers and destroy siege engines.
I made sure that in its morphology we really felt the massive side of the dragon.
As for the warlord, we are a warrior hungry...
2023-12-28 22:16:02 +0000 UTC View Post
HI guys ! i had a little time and managed to make 2 small minis for you (which have already been made for a while but which the community loves) the Christmas baubles are available!! directly in your library for subscribers!
If you are not yet, you can still benefit from it by joining us here:
https://www.myminifactory.com/users/Arcanum%20Workshop
or
Join our patreon : 2023-12-23 08:04:25 +0000 UTC
View Post
Hello again guys,
This is the post for the patreons subs
Code is "WINTERPRIME" for 50% off , whole store
2023-12-19 19:29:44 +0000 UTC View Post
Hi everyone, We have launched the winter sales, you have the possibility to buy our figurines with 40% OFF using the code: "WINTERSAVINGS"
And for tribes and patreon subscribers 50% on the entire store. so if you are not a subscriber there is still time to join us to benefit from our great Welcome pack (Code in the next Post)
To give you some news on the next release and already ready our dragon is ready to fly and join your campaign fr...
Hi everyone, as planned, here is a little preview of the progress of the project. Currently January is well underway, and I plan to provide you with the Lord and the Dragon for next month.
But one question remains unanswered, do you prefer the dragon to be mounted or not? This beast will be more massive than the first. and the character will be on a 32 MM base.
If you have any questions or other questions, don't hesitate, I'm available! ^^
2023-12-14 21:10:39 +0000 UTC View Post
Hello everyone, little wip of our next best, here is a big dragon whose inspiration comes directly this time from God of war,
I wanted to give this time a little iguan-like appearance in the way the legs are placed.
I tried to maximize the detail on the skin textures and made my own scales in a brush pack.
I have to work on the wings tomorrow but I'm still looking for ideas to change ...
Hello Guys here is the new code fro december if you want to grab minis in your collection !
"DECAY50"
Only this month for the preparation of christmass
we give you 50% discount Whole store hope you will enjoy !
"In the forsaken realm of Novius, where the ground lay littered with decaying corpses and putrid carcasses, there ruled a somber and mysterious figure known as the Lord of Decay. Encased in an armor entirely rusted by the ceaseless passage of time and the unrelenting decline that gripped his world, the Lord of Decay was both a sovereign and a prisoner of the perpetual decay that surrounded him.
High above his desolate domain, the Lord of Decay soare...
2023-11-30 21:41:13 +0000 UTC View Post
Hi everyone, here are a few wips to show you the progress of the project, I hope you like it, I was a little late because I had to go on a trip.
Hope to have finished in time for December 1st.
The work took a very long time but it is finally coming to an end.
There will be a little background of the character if I have time because I really want to tell him a little story.
Don't hesitate to give me your feedback, to know what you think, thank you ;)
2023-11-28 20:53:18 +0000 UTC View Post
Hi everyone, as you will see the work is progressing, there is still a lot to do and very little time but it will be a great piece to paint for your table
I made a quick little concept for the base to precisely create a ruin base, to know the direction I was going to take. Here we are more on a small stone bridge with large statues that we are normally all along the bridge . this normally serves as a scale to see the size of our wyvern.
2023-11-16 19:08:34 +0000 UTC
View Post
Good evening everyone, it's November 10th and it's time to show you what I have to offer for the next month because it's not easy, I'm offering you a special saga about damned riders accompanied by their winged mount, If we compare this, it would be more in the style of the horsemen of the apocalypse.
So I would do One mount and its master for 2 or 3 months. but be careful it will not be a small miniatures, I really want to make that clear.
--------------------------...
Discount Code of the Month 40%
Hello guys here is the discount code 40% of the month Whole store:
"BONESFORSAKEN40"
for the Myminifactory store.
Hope you will enjoy it!
little quick message passing by, the production of the next release has started well and it is unfolding in the form of wise w...
Hello! We're Andrea and Erin, the core of the CobraMode team. We strive to create the minis that we always wanted, but could never buy!
Every month we create a unique collection of sculpts for painting or tabletop gaming, pre-supported by Atlas3D and accompanied by lore to inspire your adventures. We hope you enjoy Buzenbo, Daitengu Swordsman this month!
2023-11-03 17:27:07 +0000 UTC
View Post
Hello everyone,
A quick post to inform newcomers and those who weren't aware of a major change in how we distribute our models to both subscribers and existing members.
Previously, models were distributed via a Google Drive link. However, starting now, the models will be delivered through the MyMiniFactory platform within 48 hours (typically sooner, especiall...
2023-11-03 10:39:21 +0000 UTC View PostHello everyone,
I wanted to take a moment to be completely transparent with you. The creative industry is going through a tough time right now. There are strikes happening everywhere, affecting the world of cinema and 3D design. Finding work has become incredibly challenging. My dream has always been to build something artistic that can capture people's interest while allowing me to truly immerse myself in what I love – sculpting and creating, whether it's in traditional art or 3D. 2023-11-01 15:14:10 +0000 UTC View Post
Hello everyone, Here is the pre-launch video of the 2nd part of the campaign "The great Old Ones" In this video you will have magnificent visuals Printed miniatures, With truly remarkable detail and finesse.
As said in the previous post,
This pack will give you access to 3 boss-type minis as well as goals to achieve with the financing of this campaign.
Each goal achieved will be added to the base pack.
And as soon as the goal is reached, I will start produc...
Hello everyone here is the long awaited moment, for this I did my best for the presentation, with a great video which will allow you to see the figurines directly printed.
This realese comes back to something more classic, because I said to myself since it's the month of November, we're slowly coming out of Halloween and I noticed that the skeletons were always quite interesting in a game campaign.
So yes we do a lot of skeletons but I try to give my little grimdark side and my ...
"In the unforgiving highlands of the Far East, where towering peaks pierce the heavens and darkness reigns, a sinister army emerges from the shadows. Once upon a time, these harsh lands were home to a thriving kingdom, a place where souls lived in harmony with nature and the ancient deities.
However, nightmares turned into reality when the Rampant Skeleton King awoke from his long slumber. Once, he was the beloved monarch of this realm, ruling...
2023-10-20 22:05:44 +0000 UTC View Post
I'm excited to announce the pre-registrations for our Frontier campaign on MyMiniFactory. This campaign will focus on the second part of "The Great Old Ones," inspired by the deities created by Lovecraft, but seen through the eyes of Arcanum Workshop. Your participation is a fantastic opportunity for Arcanum to further develop.
The pack I'm offering consists of three large-scale minis:
Hello everyone,
I have some exciting news to share! I recently took a look at our Welcome Pack and realized it's been a while since we made any additions. So, I'm thrilled to announce that we've included a few new models to make it even more fantastic.
For all our additional Tribers in the Welcome Pack, you can now enjoy: