Imagineminis

Corruption of the Glades - Satyr Male D, Female C and D (now available)

Hello everyone!

It's now available on MyMiniFactory for these 3 miniatures releases. Patrons should have received them, you might find them in your Library under objects shared with me.

All these models were supported using Lychee Slicer Download the latest version of Lychee Slicer for SLA/Resin 3D Printers (mango3d.io). Lys files are included so you can tweak the supports to your need.

All these models we...

3d Printer - Out of ideas

Hello everyone!

Yesterday I spent the whole day working on making my 3d printer to work again. I printed many calibration tests, watched many youtube videos and cleaned my VAT a lot of times.

I printed the Cones of Calibration from Table flip Foundry, I had all failure in the failure side and all failure on my good side... meaning my exposure time was indeed way too low.

So I printed a lot more cones of Calibration, then I realized that they take too long 1 hour and half eac...

About the weekend

Hello everyone!

I was planning on working on the death knight but unfortunately, I could not do it. I'm currently focusing on finishing this month's miniatures.

They are ready so what's the deal?

Well, the print is harder than it seems... The print was full of holes and failures, so I redid my supports where they failed, and then I asked my printing group what was the cause of the failure, "fragments from previously failed prints" or "underexposure", they sa...

Patron Commission August 2023 - Death knight (WIP)

Hello everyone!

I was thinking that I had calibrated my printer correctly but I had so many random flaws that I have no doubt that I'm still underexposing. I have increased the time and will put on the printer again.

While I wait for these prints to be completed I started the Death Knight, so far I have blocked almost every piece of armor.

I will start adding details to the chest armor.

This miniature will be the first released in September for Patreon and will be avai...

Corruption of the Glades - Male Satyr D (WIP)

Hello everyone!

Yesterday I finished the Satyr Female D, and posed the Male D.

Today I will work on the Male Satyr D. I will fix some minor posing problems, add details to the body and hair.

I expect to print Satyr D (Male and Female) today along with Female C.

Best regards,

Ivo

Corruption of the Glades - Female Satyr D (WIP)

Hello everyone!

Yesterday I started the female Satyr D, today I will finish her hair and add details to her body.

I won't be printing her just yet, I will after I'm done, start to work on the Male Satyr D.

Best regards,

Ivo

Patron Commission August 2023 (Poll result)

Hello everyone!

With 24 votes, the winner of the August Patron Commission is: Deathknight Highlord, wielder of corrupted sword

Patron Commission August 2023 (Poll) | Patreon

This miniature will be the first sculpture released in September for Patreon/Apoia and in October for Tribes.

Best regards,

Ivo

Corruption of the Glades - Male Satyr B and C (Now Available)

Hello everyone!

I have uploaded on MMF the Male Satyr B and C, all subscribers should be able to find these miniatures on their Library under objects shared with me.

All models are Pre-supported on Lychee slices, Lys files are included so that you can adjust the supports to your settings.

Best regards,

Ivo

Corruption of the Glades 3 - Male Satyr B and C (test print)

Hello everyone!

I have finished printing the banner for Satyr C, the supports failed the first time. Female Satyr C had a failure on her arm therefore she will be coming at a later date.

Both of these Satyr were printed:

• Elegoo Mars2 pro
• Layer 0.03mm
• Resin: Conjure Sculpt by Chittu
• Supported on Lychee slicer

I will work on the renders and will release both of these miniatures today.

I would like to thank my sponsors (besides...

Weekly Developer Log #8: Ship Builder Kickstarter

Hello everyone!

It's a weekly developer log but I missed last week's post, I could have used a bit more energy but the truth is, I was in doubt whether or not to continue with my current build. After a bit more thinking I decided not to continue, it was getting plain and boring.

Before we dive into this week Developer log, if you missed last post check the link: Weekly Developer Log #7: Shi...

Corruption of the Glades - Female Satyr C (WIP)

Hello everyone!

Yesterday I had failures on the Male Satyr B and C, and after correcting these support changes I decided to put them on hold to print along with Female Satyr C, in order to save time since I have lots of build plate available.

I had a goal to print them at night but I was only able to finish the Female Satyr C, not support her.

Today I will support Female Satyr C and print her along the other Satyrs.

Best regards,

Ivo

Corruption of the Glades - Male Satyr B and C (WIP)

Hello everyone!

Yesterday I sculpted the Satyr Banner and posed Satyr B (The one holding the Banner), I also started posing Satyr C (Low Poly).

I will focus my efforts on these 2 miniatures and release them, before working on Female C and D and also Male D. 

Best regards,

Ivo

Resin Sponsorship - Chittu

Hello everyone!

Today I received a parcel in the mail, it was a resin from Chittu.

They reached out to me asking if I wanted to be sponsored/partnership. I received this product and now I will test it. I haven't settled on any details if they are sending me new resins, but I received one. As a sculptor like me that prints their own miniatures, this is a fantastic thing, to be recognized by a company, it's incredible.

If you haven't heard of these resins check the link 2023-08-17 10:27:26 +0000 UTC View Post

Next Theme Selection Poll #1

Hello everyone!

I was planning on releasing this Theme Selection Poll next month but I decided to release it early, I want to make sure that I remember everything.

While searching for the latest theme selection I realized that every theme selection is called the Next Theme selection but it's really hard to know If I'm referring to the last or the one before or even far from that. Even though this is not the #1, this will be the first Theme selection Poll that will be numbered.

Corruption of the Glades - Satyrs (Now available)

Hello everyone!

Today I have uploaded 3 Satyrs on MMF store. All Patrons should have received them.

Once I have finished all Satyrs I will create a zip file for all the available hands.

Best regards,

Ivo

Corruption of the Glades - Satyr (Test Print)

Hello everyone!

I was planning to release this post earlier today but unfortunately, they had an energy failure here in Brazil, luckily the printer had finished its business and I was able to clean the miniatures without much effort, to cure it I was lucky because it's a sunny day here. The only thing I had to wait for the energy to come back online was to take pictures and make the publication itself.

I was planning to paint some miniatures while I was waiting for the energy to c...

Corruption of the Glades - Male Satyr (WIP)

Hello everyone!

I have finished the female satyr and printed her successfully (cleaned today). While she was printing I worked on the male satyr. While assembling the gloves on the male, the hands did not work well, therefore I increased the size and the bracers by 10%.

After the female was done printing I realized how small her hands were, therefore I will redo her arms and make them 10% bigger. So It will take a bit more time until release.

Tomorrow I will pose the male so...

Patron Commission August 2023 (Poll)

Hello everyone!

It's time, for another Patron Commission poll! Help me decide what will be made as Patron Commission.

• The requests are listed by the order in which they were made, except that I will change the order of the platforms so that it's not unfair.
• The most voted model will be available in September for Patreon, Apoia.Se. October for Tribes and Minihoarder subscribers.

The poll consists of...

Corruption of the Glades Boss Poll and Changes

Hello everyone!

I'm closing the poll for the corruption of the Glades final boss. The winner is the big bulky boss.

Month changes

Now to the good part (or not, depending on your point of view). yesterday I was talking to a Patron about how I should add some scatter terrain for the releases, I had a few things in my mind for this release. After sleeping I had a dream about what I should do, after waking up I started to think what would be the best approach fo...

Corruption of the Glades - Satyr Scouts (WIP)

Hello everyone!

I'm testing a new structure of WIP posts and will see if it works better than the previous structure. Instead of using the images on the top, I will attach them to the text. I will still make the new updates on top so it's easier to view the new content.

August 8th

Yesterday I started working on the female Satyr.

Since I never made a Satyr and ...

Patron Commission - Paladin Highlord (Now Available)

Hello everyone!

Paladin Highlord is now available on MMF. If you are subscribed, you should be able to find it on your Library under objects shared with me.

This miniature has 2 body options and 4 hand options that can be mirrored Left and Right on the build plate before printing (there is one example with the helmet that I mirrored the body).

All these miniatures where supported using Lychee Slicer Download t...

Weekly Developer Log #7: Ship Builder Kickstarter

Hello everyone!

It's a bit late (It was supposed to be on Friday) but I have an update to show, today I brought 3 images. If you missed the last developer log please check the link if you are interested: Weekly Developer Log #6: Ship Builder Kickstarter | Patreon

Workflow changes

After thinking for a while I decided to change my workflow, I was making a rough bloc...

Patron Commission Request - August 2023

Before you continue reading the post check if there are 8 comments before you (if there are, then, all the slots have been taken), and write down "Imagine this!", after doing that, you reply to this post (or not), and then continue reading. Posting this will reserve your slot, and you can describe your request later on (to keep things organized, reply to your own comment). Speaking what you wish or any other word won't reserve your slot.

The slots will...

Patron Commission - Paladin Highlord (WIP)

Hello everyone!

Update August 4th

Yesterday I finished the model and weapons. Because of the Gloves, this model will be modular in the middle of the arm, due to this cut it won't be possible to use other modular arms so I will import the shield from Old Knight, just in case anyone wishes to make a classic paladin (even though the weapon is considered two-handed).

Today I will pose this model, finish some details, support, and test print tonight. If everythin...

Partnership - Lychee Slicer

Hello everyone!

Today I was invited to work as one Ambassador for Lychee Slicer, this is an easy task because the software is awesome but, this will require me to adjust some things on my Instagram profile, linktree, Patreon page and also MMF page.

Taking part in this program I received a License to use to support my miniatures, meaning that I will support faster and better (probably).  

Today is the first day of the month, soon I will post a WIP on the Paladin Highlord...

Monthly Report - July 2023

Hello everyone!

Today is the last day of July. Things got delayed because I was sick at the beginning of the month but everything worked out fine. I still have time to catch up, but I will get things on track soon. I also updated my backlog (things I wish to do).

Miniatures released this month:

• Loyalty Reward 03 Months - Ogre Mage...
  2023-07-31 12:05:40 +0000 UTC View Post

Weekly Developer Log #6: Ship Builder Kickstarter

Hello everyone!

It's Friday and I have something new to show on the project. If you missed last week's update here's the link: Weekly Developer Log #5: Ship Builder Kickstarter | Patreon

First of all, I was planning to show my results for the floor test print but, due to this week's Patreon production things got busy and I was unable to print those files, this will be done next week. 2023-07-28 12:32:49 +0000 UTC View Post

Corruption of the Glades 3 - Boss Poll

Hello everyone!

On Corruption of the Glades Part 3, there will be a boss miniature: 

Avraxx: Boss (L), with a regal posture and ornate armor, he carries a massive Curved sword.

This was my initial plan, but while searching for inspiration I found about Xavius...

I found his old a...

Available now - NE Mounted Archer Hero, Nassam Mounted and Nyla Mounted

Hello everyone!

It's now available on MMF the following miniatures, NE Mounted Archer Hero, Nassam Mounted and Nyla Mounted. You should be able to see these miniatures on your Library under objects shared with me.

NE Mounted Archer Hero was also distributed to last month Patrons as promised.

Best regards,

Ivo

Test Print of Miniatures - Nyla, Nassam and NightElf Hero

Hello everyone!

Today I took the last miniatures for this month out of the printer, without a single failure. All of these miniature were printed using Elegoo Mars 2 pro, gamer resin and  layer 0.02mm.

Nyla mounted

• I will make the flying stand longer with a larger base. The way it is now, it's hard to glue on a surface and the wing were touching the ground, this might happen depending on the angle you chose to glue yours.

Nassa...