Imagineminis

Corruption Of The Glade - Werebear (WIP)

Hello everyone!

--- Update february 7th ---

Yesterday I refined the shape a bit more, the face looks a lot more like a bear. But, far from finished. Just to test if the proportions would work ok I started to toss some simple objects and shape them in a rough way to see if it would look ok.

Today I will be working on the face and adding a bit more details to it. I won't be making modular heads like Hell Vanguard, I will focus on one Miniature at a time.

Patron Commission January 23 - Forest Troll Chieftain (Testprint)

Hello everyone!

Yesterday I could finally take the forest troll Chieftain out of the printer (On the third attempt)

I really liked how this guy turned out, it also gave me a feeling of making more followers for him.

He was printed on Elegoo Mars 2 Pro, layer 0.02mm and I used a Game resin.

After I'm done with a few posts I will make the render and release this guy. 

Best regards,

Ivo

Patron Commission Request - February 2023

Before you continue reading the post check if there are 8 comments before you (if there are, then, all the slots have been taken), and write down "Imagine this!", after doing that, you reply to this post (or not), and then continue reading. Posting this will reserve your slot, and you can describe your request later on (to keep things organized, reply to your own comment). Speaking what you wish or any other word won't reserve your slot.

The slots will...

Patron Commission January 2023 - Forest Troll Chieftain (WIP)

Hello everyone!

Update February 3rd

Finished the armor pieces. I also added the ears requested on the arms and on the belt, I will keep those as separate objects so that you can remove them in case you think they are too Creepy.

Today I will pose, fix the anatomy, and will do my best to support and print.

Update February 2nd

Yesterday I worked mainly on the hair and some minor details (Like his armor). I might come back and add s...

Corruption of the Glade - Discussion of ideas

Hello everyone!

I started collecting references for start sculpting the werebears that will be released in February.

For body proportions, I will go with WC3R. As far as size goes, according to the wiki they do have from 7-10 feet in size (2.13 - 3 meters) and 3 feet in width (0.9 meters), this miniature will be pretty bulky. I will use something in the middle of 8,5 feet (2.59 meters) the width will be adapted. The height will be measured at the center of the eye. I don't know ho...

Monthly Report - January 2023

Hello everyone!

Today it's the last day of the first month of the year. For one moment I thought I was not able to deliver what I was planning, but in the end, everything turned out great!

Miniatures released this month:

• Patron Commission: Daughter of the ocean
• GOH_HellVanguard Leader
• GOH_HellVanguard x6

This month I opened the next theme selection Poll 2023-01-31 10:45:02 +0000 UTC View Post

Gates of Hell - Part 1 (Now available)

Hello everyone!

On Saturday I have uploaded the Gates of Hell Part 1 Bundle on MMF. This bundle was delivered along with all the miniatures as separate objects. You can choose what's best for you to download.

You should be able to find the miniatures on your library under objects shared with me. If you have any problems please let me know.

Best regards,

Ivo

Gates Of Hell - Bases and Hellvanguard E (Test Print)

Hello everyone!

I have finished printing the Hell Vanguard E and the bases.

The Idea for the bases was to give a stone floor and some flowing texture (like Lava, Fel Lava, I will try to print mine green).

I still have some supporting issues but those are easy to solve.

• Printer: Elegoo Mars 2 pro
• Layer: 0.02mm
• Resin: D20 by Smooth3d

I will now work on the renders to release all Gates Of Hell miniatures produced this month. I will also...

Gates Of Hell - Hell Vanguard B, D and F (Test Print)

Hello everyone!

It's now available in the Google Drive folder for the update on the Hell Vanguards. This time I added B, D, and F, the Flail, and supports for the 2-Handed Halberd.

In the last picture, I also added a failed print on the Hell Vanguard F that I glued a different weapon option, I'm impressed by how much it looks different from each other.

All of these miniatures were printed on an Elegoo Mars 2 Pro using a national brand resin with a layer of 0.02mm

Today...

Gates Of Hell - Hell Vanguard A & C (Test Print)

Hello everyone!

This weekend I worked on both of these models and could finish the supports yesterday.

After the night printing they are now ready, without fails. Printed with 0.02mm layer and a National Brand gamer resin.

The 2Hand Weapons are massive and exagerated, I think it could be smaller but I don't regret.

I have placed the files and supports inside the Google Drive folder.

2023-01-23 11:57:42 +0000 UTC View Post

Next Theme Selection Poll

Hello everyone!

With the rotation plans on the Themes, I think it's a good idea to expose and discuss the next theme. I wanted to lay down my ideas before I forget.

Poll rules:

• Any option with 0 votes will be trashed, it simply it's not good.
• Any option with less than 10 votes will be recycled, meaning that it will not show again for some time (I can rework those ideas).
• The older theme ideas are at the top, in case of a tie, the top ...
  2023-01-21 12:53:50 +0000 UTC View Post

Patron Commission - January 2023 (Poll result)

Hello everyone!

The poll has ended and it's time to announce the winner of this poll.

With 26 votes the winner is... Forest Troll Chieftain

Thank you all for taking the time to vote. This miniature will be the first sculpted in February 2023 and will be available in that month for Patreon and Apoia subscribers. Being available on March 2023 for tribes subscribers.

To see the other requests and poll you can check the link below.

2023-01-21 11:56:34 +0000 UTC View Post

Gates Of Hell - Hell Vanguard (WIP)

Hello everyone!

Update January 21th

Finished all weapons and "posed" the miniatures. These poses still require a few tweaks and some muscle positioning.

Today I will be working on adding details to them. I will focus on one at a time so that I can export the files, support them, and test print all within time.

Update January 20th

Yesterday I blocked the shapes for the weapons. I ended up reusing the Axe head to create a Sword. 2023-01-19 12:24:17 +0000 UTC View Post

Early Access Link

Hello everyone!

As mentioned in another post here is the link to download the Early Access content.

https://drive.google.com/drive/folders/1uQTNNqRWqJpbMke8KryfpYPcP6YPcYBW?usp=share_link

Best regards,

Ivo

Gates Of Hell - Vanguard Leader (Test Print)

Hello everyone!

Today I have taken the Hell Vanguard Leader from the printer. I could not find a single problem with my support.

He was printed with a 0.02 mm layer.

I still need to make a base for this miniature therefore I can't release it yet, so I will bring the Google Drive link in another post so that you may print the way it is (as a WIP).

I won't change anything in the miniature but there are some things that are missing: More weapon options, more heads, and th...

Patron Commission - January 2023 (Poll)

Hello everyone!

It's time to help decide what will be made as Patron Commission.

• The requests are listed by the order in which they were made, except that I will change the order of the platforms so that it's not unfair.
• The most voted model will be available in February for Patreon, Apoia.Se. March for Tribes and Minihoarder subscribers.

The poll consists of requests from Patreon subscribers and f...

Loyalty Reward 03 and 06 Months

Hello everyone!

There has been an update on Patreon Filter options and now I can see those that have been supporting me for at least 3 and 6 Months I still can't see consecutive but... at this point I don't think it matters, it's easier this way.

Patrons that are supporting me:

• More than 3 Months: 72
• More than 6 Months: 65

Thank you for supporting me and making everything possible.

Loyalty Rewards have been given on MMF, if you have problems,...

Patron Commission December - Daughter Of The Ocean (Now Available)

Hello everyone!

The Daughter of The Ocean is now available on MMF, you should be able to find these miniature on your Library under Objects shared with me.

Best regards,

Ivo

Patron Commission December 2022 - Daughter Of The Ocean (Test Print)

Hello everyone!

Today I have taken the miniatures (Daughter and Her Murloc Pet) from the printer.

The picture was not that great because of a pigmentation problem on the Resin Batch, I think that from now on with this resin I will have to Prime it before taking the pictures. 

She has a ton of tiny little details, completely impossible for a noob like me to paint (probably). Printing her bigger will definitely look great.

They were printed using Elegoo Mars 2 Pro w...

Gates Of Hell - Hell Vanguard (WIP)

Hello everyone!

Update January 18th

Posed the model and added details. Also sculpted the first Axe.

Today I will work on the hands and export the files, support, and Test print today.

This will be the last WIP for this post. I will open a new one later with all the weapons sculpted (as soon as I make them available).

Update January 17th

Finished the shoulder(I will model the fel fire after posing), and the Belt armor, and a...

Patron Commission Request - January 2023

Update: All slots have been taken

Before you continue reading the post check if there are 8 comments before you (if there are, then, all the slots have been taken), and write down "Imagine this!", after doing that, you reply to this post (or not), and then continue reading. Posting this will reserve your slot, and you can describe your request later on (to keep things organized, reply to your own comment). Speaking what you wish or any other wor...