Imagineminis

The Dark Council - Miz'la, The Queen Of Lust (Render)

Hello everyone!

Miz'la is printing again, while I wait, I started creating the Renders. She will be uploaded on MMF as soon as possible.

Miz'la is the last miniature from The Dark Council Theme, a set of 7 Dreadlords.

She comes with 2 body options with both Winged and Wingless options, it's possible to customize her by removing certain pieces of armor using Blender or other 3d software.

She has modular arms, 6 options, and compatible L/R.

Submissive Gelvain is pa...

The Dark Council - Miz'la, Queen of Lust (Pin-up,WIP)

Hello everyone!

So, I decided to make a Pin-up... lol.

She was supposed to have volume and be Queen of Lust but, without a proper pin-up, it felt wrong, so I am working on it.

She won't have modular arms, and it will be possible to remove her armor parts using blender, but I will put 2 versions Armor and skimpy (also winged variations, to a total of 4 options).

Since adding a shoulder would hide her silhouette I decided not to add it but, you can use the other Miz'la p...

Tribes one Year anniversary

Hello everyone!

Tribes is celebrating 1 year anniversary (Not me though, I have only 7 months of Tribes), to Celebrate this, MMF will make a Frontier with many creators like me that are part of the Tribes. It should go live in the next few days.

What is this Frontier? To be honest, I don't know lol... but they requested me a Month of Tribes release.

From my knowledge, Frontier works like a kick starter, so my best bet is that you will invest a certain amount of money to grab...

New Tier - Chronomancer

Hello everyone!

This has not been a good month in terms of subscriber growth, I get one and lose another, so it felt as if I was running in the same spot. Many people join because they only wish for the Loyalty rewards and while sleeping with this thought in mind, I came up with one idea, a new Tier, The Chronomancer.

Well, the Chronomancer is a Time spell caster, and this Tier could not be any different. So, I packed 3 months in a single subscription month. People that are starti...

The Dark Council - Miz'la Hand Option (Gelvain, WIP)

Hello everyone!

Update September 26th

Finished Gelvain sculpture, and Miz'la Hand Option. You will be able to print Gelvain Separately or as a "pet" the chain should be glued to his back since I didn't want to make holes in him I left the chains kind of subjective.

Sorry, I was planning to finish this over the weekend but I had a rough weekend and I could not manage to do this but, it's done. Now it's time to make the supports and test Print.

What come...

Patron Commission - September 2022 (Poll Result)

Hello everyone!

The poll has ended and it's time to announce the winner!

This month's winner is... with 29 votes we have a tie lol.

Classic WC3 Lich and Maiev Shadowsong

Unfortunately, I am only one and I can only do one of those, so to break this Tie the first to be requested wins, therefore Classic WC3 Lich and will be our first miniature for October.

This will be hard to do because there are a lot of cool Lich miniatures, but I will do my best!

Thank you...

The Dark Council - Miz'la, Queen of Lust (WIP)

Hello everyone!

Update September 23th

Finished Miz'la but she won't be available for now. I will pose Gelvain and make one last hand of Her.

I chose 2 body options but, it's possible to go beyond that and remove more armor pieces using blender (I left those as a separate object). For a Pin-up maybe I should include.

Update September 21th

Added details to her leg armor and Panties/Belts. I will change the rings from left to right ...

The Dark Council - X'Avon and Bat Swarm (Now available)

Hello everyone!

Today I have added on MMF The Dark Council - X'Avon, The Wingless and The Dark Council - Bat Swarm.

With this release the set of Dreadlords has grown to 6, one more to finish the theme.

Best regards,

Ivo

#3dprintedminiature #paintedwarhammer <...

The Dark Council - Bat Swarm (Test print)

Hello everyone!

This miniature was not planned as a release but, when I finished X'Avon's bat cape I realize that I had some nice bats and why not make a bat swarm with it, and so I did.

I created 3 bat swarms using the bat models, clumping the bats without losing their reality (too much intersection) and also keeping them together after 3d printed was a challenge but I think it looked cool in the end.

Supporting these bats was harder than clumping, each bat is small and has...

The Dark Council - X'Avon, The Wingless (Test Print)

Hello everyone!

Sorry for the delay, my resin ended (I have around 50g remaining) so I decided to print with the newer resin and calibrated my printed, after 6 calibration Matrix I found little change among them and 0.6s was working fine to my eyes... silly me lol. So, I printed this guy with 0.6s per layer, only to realize that I had nothing on the build plate on the following day except supports. After doing the supports on the chin again, I printed the Uncaped and the bat cape versio...

The Dark Council - X'Avon (Testprint Feedback)

Hello everyone!

Today I have finished printing X'Avon, as you can see in the picture there are support flaws, so I will need to print him again. Support failures, both arms, chin, and horns.

I haven't printed a miniature and wished to redo something until now... The cape looks fantastic in the 3d and also when printed but, it's too thick, meaning that it would waste too much resin on something that does not need to (to the point where it weight almost like another 32mm miniature, ...

The Dark Council - X'Avon, The Wingless (Render)

Hello everyone!

I have finished the model and every additional piece, now it's time to export the assets and make supports.

This time it will take a while to do this. There are 3 body options (Capeless, Cape, and Batcape). To minimize my supporting time I will see if I can split the cape models and take the cape as a separate print, This way instead of supporting everything again I would support only the cape and I would also print only 2 models.

He will also have 4 hand Opt...

Change Artstyle

Hello everyone!

Today I was browsing some other artists work and stumbled on a recent launch by Artisan Guild, so I compared the model with one I did.

Looking at my most recent models, especially female Elves (Dark Ranger and Conquest) It's possible to see that their bodies are too thin, of course for an Elf that makes sense but for a miniature, I think they look small.

The truth is I am not happy with my current art style, I still have lots to improve. As an Artist, I think...

Live

Hello everyone!

I was invited to join in a Live from @thingsi3dprinted on Instagram,  although I'm not a painter I will join the live and Paint a miniature while talking (I'm neither good with English speaking nor good at painting) let's see how it goes.

If anyone wishes to join, you are welcome.

Best regards,

Ivo

Patron Commission - September 2022 (Poll)

Hello everyone!

It's time to help decide what will be made as Patron Commission.

• The requests are listed by the order in which they were made, except that I will change the order of the platforms so that it's not unfair.
• The most voted model will be available in October for Patreon, Apoia.Se. November for Tribes and Minihoarder subscribers.

The poll consists of requests from Patreon subscribers and from Apoia.Se. This time I am also including requests fr...

The Dark Council - Tok'zreth, The Loreseeker (Available now)

Hello everyone!

Tok'zreth is now available on MMF.

She comes with 3 body options already pre-supported; you can also remove a few armor parts to customize yours (adding a different shoulder for instance).

There 3 hand options included, you can mirror before printing to use L/R.

She was printed using gamer resin, on an Elegoo Mars 2 Pro with Layer 0.02mm.

Best regards,

Ivo

The Dark Council - X'Avon, The Wingless (WIP)

Hello everyone!

Update September 13th

I Finished posing, and for him, I chose a Low stance with a wide stance, this was to give an idea of a side dash. All the cloths will be going in the opposing direction to give the idea of motion. 

Now I will fix mesh parts damaged by moving, and pose the hands, and face (I will add a grinning teeth expression).

I will also sculpt all the clothes his wearing and cape. I will also try to make some bats, and try...

Loyalty Rewards 03 & 06 Months

Hello everyone!

Today I have delivered the miniatures for those that have been supporting me for the past 03 & 06 months. The miniatures are available on MMF to download in Objects shared with me.

This month:

03 Months: 05 Patrons

06 Months: 0 Patrons

Those that received theses miniatures before where not included because they should already have access to them. If you have been supporting me for this time and miss a miniature please let me know. I will to my...

The Dark Council - Tok'zreth, The Loreseeker (WIP)

Hello everyone!

Update September 07

Finished detailing body armor pieces. I will now sculpt the wing's fingers and then pose the model. It was not in my plans to make modular hands for her but I guess I will do it, but due to the Armor structure, the cut will happen in the middle of the arm.

For now, I am thinking of a big spell, and staff but I will also include a hand/Claw gesture as options. I will make the cut first and let the pose guide me.

This ...

Patron Commission Request - September 2022

Hello everyone!

EDIT: All Slots have been taken!

Before you continue reading the post check if there are 8 comments before you (if there are, then, all the slots have been taken), and write down "Imagine this!", after doing that, you reply to this post (or not), and then continue reading. Posting this will reserve your slot, you can describe your request later on (to keep things organized, reply to your own comment). Speaking what you wish...