New sculptures uploaded and sent! If you supported December and didn’t receive the link, send me a message at infested.imagination@gmail.com. These took me a bit longer because I didn’t cut the figure like I used to — wanted to try something different.
2025-04-07 10:20:21 +0000 UTC View Post
New sculpts! I will be sending the folder link to those who supported November in a few moments, if you supported November and you didn't receive the link write at: infested.imagination@gmail.com
2025-03-07 14:24:10 +0000 UTC View Post
As usual a bit late but catching up! I don't think a detailed explanation is worth it but due to unforeseen events (breakup of a 10 year relationship) I had to move away and start over, obviously I will continue to upload sculptures, I must catch up soon.
The link has already been sent to everyone who supported October 2024, if you supported October and you didn't receive the link write to the email, also feel free to send ideas if you want to 2025-01-26 08:02:22 +0000 UTC
View Post
Ok! I was finishing 2 more so I uploaded all 6 together and I already sent the link to all the patreons who supported these months! I should upload at least 1 more this month
IF YOU SUPPORTED A MONTH AND DIDN'T RECEIVE A LINK WRITE TO ME AT: infested.imagination@gmail.com thanks!
2024-09-16 16:46:00 +0000 UTC View Post
Finally back to work! I'll be uploading these 4 new sculptures any time soon and will send the link to the supporters as usual. Thanks for your patience
2024-09-01 20:39:46 +0000 UTC View PostLong story short: I haven't had my workstation for almost 2 weeks and I just found out that it will take at least 1 more week, so I will refund all patreons this month and take advantage of it to make up time when it arrives. Thank you for your understanding
2024-07-06 14:54:36 +0000 UTC View Post
Well I finally uploaded the April models! I will be sending the folder link by private message as always. If you supported in April and do not receive the models, write to me at infested.imagination@gmail.com.
I noticed that some people like the stylized girl from last month (the goblin one), so I tried to offer something similar this month. As always, the files are cut for easy printing and painting.
Im...
2024-06-06 18:39:03 +0000 UTC View Post
March sculpts have been uploaded! the folder link will be sent via Patreon direct message shortly. If you support March and haven't received the link, please write to me at infested.imagination@gmail.com.
Each sculpt divided into 6 and 7 pieces respectively with a complete version included.
I'm still searching for a novice sculptor to assist in improving speed and/or quality. If you know someone who ...
2024-05-03 01:49:39 +0000 UTC View Post
Both February sculptures are now uploaded, the link was sent via patreon direct message as always, if you supported February and didn't receive the link please let me know.
thank you for your patience!
As you know I had to travel unexpectedly this month, I am finishing these 2 versions of orcs that I will upload to the corresponding month as always.
I'm still looking for a partner to catch up and move forward with other things that I have in mind and that I'm delaying due to lack of time, I hope to do it soon!
2024-03-31 22:51:52 +0000 UTC View Post
The second January sculpture uploaded! everyone who supported January has access, if you supported January and do not have access write to me at infested.imagination@gmail.com
I have to take an unexpected trip but I will take my tools to continue sculpting, I will publish the models at the end of the month when I return since I need my workstation to make the renders.
I also wanted to let you know that I am already looking for a novice 3D artist to help me as a partner with the mo...
2024-03-05 01:08:42 +0000 UTC View Post
First January model has already been uploaded! I'll send the folder link by private message to all the patreons who supported January in the next few moments.
if you do not receive it, please write to me at infested.imagination@gmail.com.
Harpy sculpt has 11 printable STL files (includes 1 full version)
2024-02-16 22:13:01 +0000 UTC View Post
The new models have already been sent by dm to all patreons, if you supported December and you did not receive the link please write to me at infested.imagination@gmail.com
"Bug" sculpt: 13 printable keyed STL files (includes 1 complete version)
"Tentacles" sculpt: 5 printable keyed STL files (includes 1 complete version)
You can send ideas for sculptures too!
2024-02-01 20:44:31 +0000 UTC View PostSome have asked about the models. Yes, I'll upload them in a few hours they are practically finished, sometimes I can't find a good idea and sometimes the idea is good and i want to continue working on it, thats why it takes me longer.
2024-01-31 01:18:23 +0000 UTC View Post
Both November sculpts are finished, I'll send a link in a few moments. If you supported November and you don't receive the link write to me.
Cut and full versions as always!
Thank you and happy holidays
2023-12-30 01:13:07 +0000 UTC View Post
Well I finally finished it! The model is already in the October folder, all October supporters already have access to the folder. I will also give access to this sculpture to anyone who joined in November due to my delay (I will check it, but just in case if you joined since November, write to me and I will give you the link to this sculpture).
12 printable parts (includes 1 full version)
Now I will have to make a few simpler models to ...
I know I'm late but I want to finish it well and then I'll see how to catch up, I realized that I had never made a minotaur sculpture so I'm working on it!
2023-11-22 12:14:37 +0000 UTC View Post
New "Cowgirl" sculpt is already uploaded to the folder, I just send the folder link to all active patreons, if you supported October and don't have the link let me know to infested.imagination@gmail.com
11 printable STL files (includes 1 full version), I'll look of a spooky idea for next one.
Cgtrader changed its terms from one day to the next so all my models have been suspended, you can only get them on Cults3D and here, it is difficult to reach a new audience s...
2023-10-31 23:24:42 +0000 UTC View Post
New "warrior slave" sculpt inspired by a patron's idea, It is already uploaded to the September folder, all September supporters have access, if you supported September and don't have the link let me know.
9 printable STL files (includes 1 full version).
Thanks!
2023-10-14 22:46:38 +0000 UTC View Post
As you already know I'm late, so this is the first one of September, in a few moments I will send the folder link to all September backers, if you don't receive it, write to me.
When I finished making all the renders I realized that the "pause" object on the screen was missing, but it is in the printable STL files, as you can see in the screenshot, a small detail that gives strength to the work.
13 printable STL files (includes 1 full version)
This one was made from a su...
2023-09-29 19:38:35 +0000 UTC View Post
Well I finally finished this sculpt! there is no particular reason it just took me longer than it should, sorry for making you wait!
The files are already in the August folder, all August supporters have access, if you supported August and don't have the link let me know.
Note that the space between the parts like the creature's shoulders is only seen in the render, the printable file does not look like that. There are 13 printable STL files (includes 1 full version).
Th...
2023-09-19 03:57:24 +0000 UTC View PostI confirm that yes, there is going to be a second August sculpture, I will upload it as soon as I finish it, it was looking boring so I restarted it several times that's why i'm late
It's a Mindflayer sculpt (suggestion from a patreon supporter).
Thanks!
2023-09-05 09:51:54 +0000 UTC View Post
New Big Worm sculpt, the August GDrive folder link will be sent to all active patreons in a few moments as always.
7 cut printable STL files (includes 1 full version)
Thanks!
2023-08-18 01:36:44 +0000 UTC View Post
New "Space Walk" sculpt is already in the July GDrive folder! all active patreons that supported July should have access, if you supported July and you don't have the link write to me, sometimes I don't get a notification, so if I don't answer write again.
11 cut printable STL files (includes 1 full version) + 7 renders
I'm pretty proud of how this one came out, I hope you like it.
Thanks!
2023-07-31 19:59:03 +0000 UTC View Post
New sculpt is ready, I'll send the GDrive July folder link to all active patreons in a few moments. More uncensored renders in the folder along with the 20 printable STL files, (includes 1 full version).
I dragged the delay from last month, I'll get to work right now to avoid being late again.
Thanks!
2023-07-21 03:07:18 +0000 UTC View Post
New Meru succubus sculpt is already in the June GDrive folder! all the patreons that supported June can find it inside the folder, if you supported June and you still don't have the link please write to me, sometimes I don't get a notification, if I don't answer write again.
9 cut printable STL files (includes 1 full version).
I wanted to try something different with this one, honestly it's not the work I'm most proud of, but I hope you might find it attractive. 2023-07-08 03:34:13 +0000 UTC View Post
June's second sculpture is on the way, I couldn't finish it for today, I'll upload it in the June folder as soon as it's ready.
Thanks!
New Witch sculpt is ready, I'll send the GDrive June folder link to all active patreons.
More uncensored renders in the folder along with the 9 cut printable STL files, (includes 1 full version).
If I have time to spare I will make a 360° gif as with the previous one
Thanks!
2023-06-18 01:13:15 +0000 UTC View Post
You already know that I usually upload the first model on the 15th, but I was working for a few days on another sculpt that I finally discarded, so I'll be a couple of days late. I'll upload it as soon as possible.
I will send the link of the June folder link to all active patreons when I upload the first sculpt, as always.
Thanks!
2023-06-15 22:34:11 +0000 UTC View Post
At your request, here it is. I hope it helps.
2023-06-01 13:35:25 +0000 UTC View Post