Updates, updates updates :)

Ok, as i mentioned on a post while back. I've been taking care of many small requests you had for files, and out of the bunch here are some that i think will be benifical to all and will either improve the set, or they just made sense when you asked me to update it, so i did :) Thank you all for activelly participating in all of this, so let's take a look at some updates !

1- batarang - special thank you to  Mike Schmidt for taking the time to research and test this option. The pin for the battarnd had a small error - it would get too loose or fall out - so i added 2 extra options : 1- threads for m3 screws and new "hinge" plate, as well wider holes for Heat-set insert that work with screws ( check photos) - you can just press them in with soldering iron and then use m3 screws

2- Darth Talon - optional update - the "mounting" screws now have an extra little edge for the screws to sit flush in

3 - Tech googles were not easly accesible - i added these little "frame extensions" so you can wear the glasses like regular glasses now. you have the standalone extensions to be added to allready printed parts by gluing them to the prints so you dont have to reprint , or you can reprint each frames or combined glasses. So now we have the options to wear the glasses or the short "sides" to add elastric straps as before, your choice :)

4. bo katan seem to have an extra plate/bucke on the belt , so this one is now made and added to the set - the measurement match the other buckles /belt hanger files on my set.

5. Roning scabbard - i was told some people use 36 inch blades and the scabbard was too short - in order not to reprint all of it i just extended the P2 part, so there is now another P2 part that will allow you to use much longer blades in your roning builds.

The folder are updated - if you have access to those projects just refresh the google drive folder and download, if you cant find the link - drop me a message ;)

This is it for now, i will be adding more of these fine tuned updates , and new models in the following days :)