COOKIE Egg!
Added 2025-01-13 21:40:47 +0000 UTCEDIT: Updated the files as some folks were having issues with the Egg! Please re-download the files. There is now an indent on the lower half of the egg, which lines up with the CW on the top half. :) This will make sure you have proper alignment of the frosting!
Hi Cinders!
COOKIE EGG! This design will work great for all the Dragons in the Cookie Dragons Series - including the past Gingerbread Dragon!
I am making this a Supporter Exclusive so it's available to everyone as we have a couple more Cookie Dragons come out in the future! Also comes with a .3MF Color File! I hope you all enjoy! :)
(Baby Dragon previously released as a January 2025 model)
- REMEMBER the eggs to baby/adult dragon ratio is 1:1
-Tracy
----------------------------------------------------
FILAMENT and Tools:
https://www.amazon.com/shop/cinderwing3d
Sunlu White, Amloen Sakura Pink, Ziro Gradient Twinkling Flower Rose, Flashforge PLA Pro Skin
-----------------------------------------
All my designs are print-in-place (unless otherwise specified) and require no supports. All you need is a clean bed and you're off!
Designs are tested between 60%-100% for strength and articulation! I will not release a design that is too fragile at these sizes. All designs go through our Cinder Test Team!
Print Settings: .2 Layer height, 15% infill, gyroid infill, no brim, and no supports. (If there are smaller parts of your print that have a hard time staying stuck to the plate, please try a brim around those parts) Any errors regarding floating regions can be safely ignored.
Please join our discord chat below for more help and discussions.
------------------------------------------------------
January 2025 Models: HERE
Baby Unicorn Dragon - RELEASED - EXCLUSIVE
Baby Alicorn Dragons - RELEASED
Wings
Wingless
Tiny Snails - RELEASED
Rose Snail
Strawberry Snail
Tiny Rose Dragon&Wyvern - RELEASED - EXCLUSIVE
Tiny Rose Dragon
Tiny Rose Wyvern
Tiny Rose Dragon Keychain
Tiny Rose Wyvern Keychain
Rose & Crystal Fidget Spinners - RELEASED
Rose Fidget Spinner
Crystal Fidget Spinner
Heart Cookie Dragon - RELEASED - EXCLUSIVE
Tiny Chocolate Strawberry Snail - RELEASED - EXCLUSIVE
Snail with Lines
Snail with NO Lines
BABY Heart Cookie Dragon - RELEASED
Cookie EGG - RELEASED - EXCLUSIVE
Secret Design
Secret Design
Secret Design
Secret Design
MOD Bonus
-------------------------------------------------------
PLEASE READ
Please remember, NO sharing, re-selling, or distributing this digital file or modifications of it in any way. Also, you are not authorized to use Cinderwing3D photos or anyone else's photos without their permission.
Please see WELCOME POST for questions, all exclusive releases, and links: https://www.patreon.com/posts/welcome-to-info-71819754
All Supporter Exclusives: https://www.patreon.com/cinderwing3d/collections
Link to the PUBLIC MODELS and Exclusives Full Index List:
Discord is our MAIN form of communication and way to provide help! Please join our community below: Discord chat HERE: https://discord.gg/cinderwing3d
For any help requests or issues please go through this email: Email (contactcinderwing3d@gmail.com) OR through a Discord ticket!
Thank you, Cinders, for your support!!! And Thank you to our Admin Jazzy and Test Team for all your hard work!
Comments
no they are guaranteed to fit 1:1 but sometimes they can go a little smaller
Tracy Francis
2025-03-19 01:51:53 +0000 UTCSo I'm printing out an egg. I have a baby at 75% and I am printing the egg at 75% but it looks huge for it. Do the eggs for the babies need to be printed smaller?
Angela Farnsworth
2025-03-18 23:47:07 +0000 UTCIt's probably not as fun, but any chance we're getting chocolate chip themed cookie things?
Marti Reusch
2025-02-13 00:19:26 +0000 UTCOk! Thanks!
Madison Bilben
2025-01-26 23:57:11 +0000 UTCYep
Tracy Francis
2025-01-26 20:34:07 +0000 UTCcan i make this go 50% with a dragon outlining it?
Madison Bilben
2025-01-26 17:07:35 +0000 UTCI ad this issue printing it with wood, because the material isn't flexible at all once printed it was just so hard to get them together :) Thanks for the tip xx
WishingRose
2025-01-25 11:42:44 +0000 UTCI'd check the slice before sending it but it maybe could yes, I just dont guarantee itll work as intended :)
Tracy Francis
2025-01-23 22:24:25 +0000 UTCHow small could these go? 25%? I'd love to make Easter Eggs
Stephanie Martin
2025-01-23 22:18:24 +0000 UTC1:1, so a 100% egg for a 100% dragon
Tracy Francis
2025-01-23 21:05:59 +0000 UTCWhat would be the size if we wanted to put a full dragon inside one of them? I have a customer who wants an egg big enough for the full dragon. Thanks!
Ed
2025-01-23 18:01:08 +0000 UTCmaaaayyybeeeee ;)
Tracy Francis
2025-01-21 18:00:07 +0000 UTCWill you do an Easter cookie dragon? :D We are really loving these.
WishingRose
2025-01-20 12:34:13 +0000 UTCI did my tests. 60% Baby Dragon fits PERFECT in a 45% egg. 50% was too big and it was sloppy.
PocketPrints 3D
2025-01-19 22:01:06 +0000 UTCActually I opened the egg and the baby dragon in the same file (each on it's own plate) and now I understand the designers reply as well. The baby is sort of smaller, but since it doesn't bend up as much a 100% baby won't fit into a 60% egg. It might fit in an 80% egg though. I think I have an 80% crystal egg laying around somewhere and they are sized roughly the same. So I'll give that a shot with a baby. Good luck if you do try it!
Ashley Florack
2025-01-19 21:58:50 +0000 UTCI understand what you are asking and I actually came here to get the same information. The baby dragon is significantly smaller than the full size dragon so a baby @ 100% doesn't also need an egg @ 100%. Maybe the egg should be something like 60% for 100% baby? That's where I'm going to start. I'll come back and let you know how a baby fits in a 60% egg. If it fits at all LOL.
Ashley Florack
2025-01-19 21:48:13 +0000 UTCYep! Its very big! Most folks dont print 100% eggs :)
Tracy Francis
2025-01-18 20:10:37 +0000 UTCOr you can work on tuning your filament and tolerances! I promise it'll help!
Tracy Francis
2025-01-18 20:10:23 +0000 UTCJust gave one of these to my neighbor's little girl, she Loves It! she also got a crystal spinner to play with. Thank you for making these
Voidstarchan
2025-01-18 18:36:55 +0000 UTCI have found that is i use a small amount of candle wax on the threads it help 100%
Mark Tuttle
2025-01-18 16:40:36 +0000 UTCmine says at 100% its going to take 1 day and 4 hours just to print the bottom of the egg is that correct? am i printing too big?
Katy
2025-01-18 09:12:14 +0000 UTCUpsized top by .5 percent and it fits perfectly now. I’m going to downsize the bottom a half percent to match everything up. The flow is fine.
Peggy B
2025-01-17 20:10:41 +0000 UTCI'd recommend checking your flow!
Tracy Francis
2025-01-17 19:22:41 +0000 UTCi just printed the egg at 60% the top is super tight and hard to get aligned properly. I'm going to try to upsize just the top by 1 or 2 % and see if that helps. Anybody else experience this and have feedback that might save me experimentation? This has been a FABULOUS month to be a member!! Thanks for all you do!
Peggy B
2025-01-16 18:55:22 +0000 UTCThese are amazing! So excited ♥️🩷
K and K
2025-01-14 23:42:10 +0000 UTCyou are so amazing at designing new and fun things! I'm so glad we are a part of your Patreon!!
Over the Brook Gaming
2025-01-14 20:26:36 +0000 UTCThis. Is. INCREDIBLE!
Kamali
2025-01-14 17:30:42 +0000 UTCWaking up to this just made my day, thank you
Sheila Sjeu - Mooi3D
2025-01-14 06:25:05 +0000 UTCThe cookie series are good for more than just Valentine's day. Next Christmas and other holidays and birthdays. Very nice indeed.
Gerhard Grobler
2025-01-14 00:35:08 +0000 UTCOk! Have fun with that :)
Tracy Francis
2025-01-14 00:29:12 +0000 UTCI'll have to do my own tests. That doesn't make sense. The babies are smaller than the adults by default.... Yeah the baby would fit in the egg, but it's going to be too big.
PocketPrints 3D
2025-01-14 00:06:44 +0000 UTCif you print a 60% dragon you print a 60% egg, 1:1
Tracy Francis
2025-01-14 00:01:04 +0000 UTCI'm having a hard time understanding "1:1". The Babies and Adult are different sizes. I get a 1:1 of the adult, but if I print this at the same size it's too large for the baby. I scaled the baby down to 60%. So do I do 60% of 50% (ie 36%) or what?
PocketPrints 3D
2025-01-13 23:54:35 +0000 UTCthey are 1:1 :)
Tracy Francis
2025-01-13 23:48:22 +0000 UTCI currently have 60% babies being Printed. What scale would be used for that? is 50% for the "Full Sized" baby dragon?
PocketPrints 3D
2025-01-13 23:45:17 +0000 UTCThank you!! ☺️
Doods
2025-01-13 23:02:55 +0000 UTC50%!
Tracy Francis
2025-01-13 22:46:54 +0000 UTCI am new and this will be my first egg. Can I ask what percentage you use to fit the baby dragons. Is it 50%? Thank you!
Doods
2025-01-13 22:40:37 +0000 UTCYou can scale down for the baby if needed but the scaling is correct. :) It's a general scaling to account for most all the dragons, including winged
Tracy Francis
2025-01-13 22:34:37 +0000 UTCIm a little confused on the ratio for Baby Dragon vs Adult. It says "REMEMBER the eggs to baby/adult dragon ratio is 1:1", but wouldnt it be different for Baby/Adult? They are huge at 100%
Michael Barbatelli
2025-01-13 22:29:25 +0000 UTCAdorable!!
K Vincent
2025-01-13 22:02:44 +0000 UTCThis is amazing!!!
PocketPrints 3D
2025-01-13 21:59:36 +0000 UTCThank you
sNp
2025-01-13 21:55:08 +0000 UTCOh my Gosh I am so excited
sNp
2025-01-13 21:55:02 +0000 UTCOh my. I know a few kids that would love this.
Dragoness19
2025-01-13 21:54:49 +0000 UTCHow cute!!!!
Dustie Chase
2025-01-13 21:49:17 +0000 UTCLove it!!!
JMac Creations
2025-01-13 21:45:10 +0000 UTC
