Alicorn Dragon - Supporter Exclusive!
Added 2024-07-29 20:01:10 +0000 UTCUpdated: Some folks were having issues with the 3mf and I have updated them!
Hi Cinders!
There was a ton of ask for not only an alternative Unicorn Dragon but ALSO one with wings! This Alicorn Dragon is a mix of mane and feathers with a traditional spiral horn! Being an Alicorn Dragon, it does have wings - however I have included a wingless version for you all as well. :)
Shout out to Cinderwing Tester, TOAD, AGAIN for the generous paint job files! He painted both the wingless and the winged version with all those feathers!! I hope you all enjoy these! My printers are down for the move and Toad also let me use his beautiful photos! THANK YOU TOAD!
Thank you all for your support!
- Tracy
FAE WOLF DRAGON UPDATE: Update V4 is now on the original post!
----------------------------------------------------
FILAMENT:
https://www.amazon.com/shop/cinderwing3d
Winged:
Base: MatterHackers Build White
Feathers: Ziro Gradient Matte Rainbow Blaze
Eyes/Toes: Amolen Silk Gold
Wingless:
Base: Hatchbox Peacock Blue
Hair: Ziro Diamond Purple
Solid Color:
Ziro Rosy Cloud (Matte)
-----------------------------------------------------
All my designs are print-in-place and require no supports. All you need is a clean bed and you're off!
Print Settings: .2 Layer height, 15% infill, gyroid infill, no brim, and no supports. (If there are smaller parts of your print that have a hard time staying stuck to the plate, please try a brim around those parts) Any errors regarding floating regions can be safely ignored.
Please join our discord chat below for more help and discussions.
------------------------------------------------------
JULY 2024 Models: HERE
Tiny Squid - RELEASED
Tiny Starfish - RELEASED
Fae Wolf Dragon - RELEASED
Baby Axolotl Dragons - EXCLUSIVE - RELEASED
Alicorn Dragon - EXCLUSIVE -RELEASED
-------------------------------------------------------
PLEASE READ
Please remember, NO sharing, re-selling, or distributing this digital file or modifications of it in any way. Also, you are not authorized to use Cinderwing3D photos or anyone else's photos without their permission.
Please see WELCOME POST for questions, all exclusive releases, and links: https://www.patreon.com/posts/welcome-to-info-71819754
All Supporter Exclusives: https://www.patreon.com/cinderwing3d/collections
Discord is our MAIN form of communication and way to provide help! Please join our community below: Discord chat HERE: https://discord.gg/cinderwing3d
For any help requests or issues please go through this email: Email (contactcinderwing3d@gmail.com) OR through a Discord ticket!
Thank you, Cinders, for your support!!! And Thank you to our Admin Jazzy and Test Team for all your hard work!
Comments
It's on the Amazon link in the post!
Tracy Francis
2025-01-08 02:20:30 +0000 UTCWhat is the beautiful rainbow filament you used for the model in the first picture?
Norn's Needlework
2025-01-07 22:04:24 +0000 UTCI love this and can't wait to make it. Can you please tell me what color you used for the 3rd picture?
Rachel
2024-12-21 15:50:41 +0000 UTCI hope we get a tadling version of these soon.
Joseph Muir
2024-12-20 03:43:09 +0000 UTCThese are beautiful! how do you do white with a secondary color?
K Vincent
2024-09-17 22:56:04 +0000 UTCsorry I can't seem to attach any pictures.
Joni
2024-08-13 10:55:47 +0000 UTCyou can slice it in chunks and add a pin structure to your cuts on any of the wingless ones. cut individual links in half horizontally with a connector that you can click together with epoxy after the whole thing is printed. My daughter made a 6ft 2 inch one on her a1 mini.
Joni
2024-08-13 10:55:34 +0000 UTCHow did you print in multicolor
Vengai
2024-08-13 01:02:44 +0000 UTC60%
Tracy Francis
2024-08-09 18:37:26 +0000 UTCThat would be awesome if you did it again, cutting at the links to blow it up is a pita and all I have is a 400x400 bed to work with.
Stargazr69
2024-08-07 14:27:14 +0000 UTCI still do not allow the sale of my models on Temu regardless
Tracy Francis
2024-08-07 00:06:35 +0000 UTCI did this once with the Infinity Dragon and it may be a concept I try again but for now I have no plans to!
Tracy Francis
2024-08-05 17:33:11 +0000 UTCCan we make a suggestion for a dragon? I would love to make one of the dragon really really big for a display at my shows. I was wondering if you can do one where you can pop links together to make them all long as you would like?
Terry House
2024-08-05 15:17:54 +0000 UTCFeel free to send in an email at contactcinderwing3d@gmail.com !
Tracy Francis
2024-08-04 01:31:14 +0000 UTCHow do I report someone for selling your prints without paying for them? They are ordering them from Temu
Over the Brook Gaming
2024-08-04 01:22:31 +0000 UTCI can't find V4 of the wolf dragon. Where can I get it please?
M.Pendragon
2024-08-02 15:51:21 +0000 UTCOkay this is beautiful! I need to make this stat! ❤️
Christy Perkins
2024-08-02 13:42:47 +0000 UTCHow much can I reduce the scale of this model?
Damian Sulewski
2024-08-01 19:32:10 +0000 UTCI love everything you do! Had my fingers crossed for this one..thank you!!
BannCran
2024-08-01 16:10:44 +0000 UTCThank you! I was working on painting it myself to match the picture. Now I don't have to finish it. That was hard! So thanks again to you and Toad!
Sewfor54
2024-07-30 19:23:19 +0000 UTCLove it!
Tiffany Daugherty
2024-07-30 14:41:36 +0000 UTCI've just finished printing the wingless version at 80% and it printed beautifully. Great design!
Kriscee
2024-07-30 10:49:35 +0000 UTCYep, I see that now. Good call, thank you! Appx 373g on a P1S 1D2h45M
Landubious
2024-07-30 00:23:33 +0000 UTCLove it
Ashley Fenstermaker
2024-07-30 00:12:28 +0000 UTCI had the same problem until I resynced my printer filament, the filament it defaults to when you load the file will not slice correctly for some reason.
Jeff Morris
2024-07-30 00:00:11 +0000 UTCsame issue for me.
Brian Becker
2024-07-29 23:43:35 +0000 UTCI would normally agree, but it's showing 0 grams! I haven't updated the firmware to the newest version, so maybe that is it? I checked several other files (some of your older models) and its showing both grams and meters.
Landubious
2024-07-29 23:19:14 +0000 UTCThat will depend on your settings!
Tracy Francis
2024-07-29 22:43:40 +0000 UTCPlease redownload the files, thanks
Tracy Francis
2024-07-29 22:38:02 +0000 UTCfor me it has radom spots all over the body like it was clicked all over. is yours the same way
Hippie
2024-07-29 22:34:13 +0000 UTCsame its not painted all the way with 3mf file
Hippie
2024-07-29 22:33:03 +0000 UTCWhen I load it in, says it was done on a old bambu studio, and its less then half painted, not sure if thats my version butching it or not.
Robyn Hemingson
2024-07-29 22:12:00 +0000 UTCHow much filament does the 4 color use? Trying to slice it and it's only showing distance on meters(145.xx m)
Landubious
2024-07-29 21:46:06 +0000 UTCI've updated the files to be merged
Tracy Francis
2024-07-29 21:38:43 +0000 UTCHmm I'm not sure, the STLs are certainly in there!
Tracy Francis
2024-07-29 21:30:34 +0000 UTCWhy am I not seeing the colorless ones? the folder only had the colored versions. Am I doing something wrong?
Emir Yildiz
2024-07-29 21:28:02 +0000 UTCThis is amazing! Can't wait to print these!
Nancy
2024-07-29 21:16:52 +0000 UTCOhhh this one is super cool! 👏🏻
Melyssa Daulton
2024-07-29 20:51:01 +0000 UTCAbout to Print soon as this other one is finished. T- 1Hr
James Flowers
2024-07-29 20:45:02 +0000 UTCthanks
Johann.kinard
2024-07-29 20:43:07 +0000 UTCThank you<3<3
Lexis Falasco
2024-07-29 20:39:21 +0000 UTCSelect all then merge
BobaFett
2024-07-29 20:37:47 +0000 UTCwhen i load the colored winged in slicer. it is in pcs not connected???
Johann.kinard
2024-07-29 20:33:41 +0000 UTCOmmmg.... well.. all my machines will be doing this
TransForm3d Printing
2024-07-29 20:31:40 +0000 UTCI’ve been waiting for this!! 😍🦄
Maricela
2024-07-29 20:23:19 +0000 UTCShe did it again! Amazing as usual! Cant wait to get started!
michael mccabe
2024-07-29 20:17:31 +0000 UTCShe did it again! Amazing as usual! Can wait to get started. Going full color change.
michael mccabe
2024-07-29 20:17:10 +0000 UTCLooks like im slicing and printing tonight after the fair
JMac Creations
2024-07-29 20:13:43 +0000 UTCIt's an exclusive so its not going anywhere. :)
Tracy Francis
2024-07-29 20:13:33 +0000 UTCSooo cute!!
JMac Creations
2024-07-29 20:13:26 +0000 UTCOoooooooh, next on the print bed for sure!
Natalia Travis
2024-07-29 20:13:24 +0000 UTCSo awesome 👌
Maddog M
2024-07-29 20:12:26 +0000 UTCLove it! I am away from my computer until next month. Am I going to be able to save the file when I get home?
Kristina McNicol
2024-07-29 20:11:12 +0000 UTCabsolutely love this one
Tara L Fansler
2024-07-29 20:11:06 +0000 UTCAmazing
James
2024-07-29 20:10:25 +0000 UTCAh! If you need me I’ll be printing magical alicorn dragons 😍
Emily
2024-07-29 20:08:14 +0000 UTCYay!!! Alicorn love 🥰🥰🥰
StarlightFoundry
2024-07-29 20:08:14 +0000 UTC🤯 so cool!
Lidia Heinzel
2024-07-29 20:05:47 +0000 UTCFreaking awesome!!!!
Over the Brook Gaming
2024-07-29 20:03:42 +0000 UTC
