BABY Cherry Blossom Dragon - Supporter Exclusive!
Added 2024-04-09 17:54:43 +0000 UTCHi Cinders!
Baby Dragon Release! - Baby Cherry Blossom Dragon!
This Dragon is a Supporter Exclusive Baby Remix from the original Adult Cherry Blossom Dragon, which was released in February!
Since this is a Supporter Exclusive Design, it will not be made public! :)
Tested between 100%-60% for strength and articulation!
MMU painted by Kelcy's Kreatures! Thank you Kelcy!
Additional Multicolor files painted by SledgePainter
(Please see below link for filaments used)
Hope you all enjoy! I have a Cinder-style dragon coming out Thursday or Friday! Stay tuned! :) Thank you!
- Tracy
----------------------------------------------------
All my designs are print-in-place and require no supports. All you need is a clean bed and you're off!
Print Settings: .2 Layer height, 15% infill, gyroid infill, no brim, and no supports. (If there are smaller parts of your print that have a hard time staying stuck to the plate, please try a brim around those parts)
Please join our discord chat below for more help and discussions.
Filament Used: https://www.amazon.com/shop/cinderwing3d
------------------------------------------------------
APRIL 2024 Models: HERE
Whatchamahoozit 24' - EXCLUSIVE RELEASED
Baby Cherry Blossom Dragon - EXCLUSIVE RELEASED
Secret Design
Secret Design
Secret Design
-------------------------------------------------------
PLEASE READ
Please remember, NO sharing, re-selling, or distributing this digital file or modifications of it in any way. Also, you are not authorized to use Cinderwing3D photos or anyone else's photos without their permission.
Please see WELCOME POST for questions, all exclusive releases, and links: https://www.patreon.com/posts/welcome-to-info-71819754
All Supporter Exclusives: https://www.patreon.com/cinderwing3d/collections
Discord is our MAIN form of communication and way to provide help! Please join our community below: Discord chat HERE: https://discord.gg/cinderwing3d
For any help requests or issues please go through this email: Email (contactcinderwing3d@gmail.com) OR through a Discord ticket!
Thank you, Cinders, for your support!!! And Thank you to our Admin Jazzy and Test Team for all your hard work!
Comments
No I have no done eggs for them
Tracy Francis
2025-02-15 20:56:44 +0000 UTCHi, I have a question. Im new since January :) Did you do the egg for the cherry blossom dragon, winter dragon, etc in the past. If so will these be available or have to pay? These dragons are really cute . thanks in advance :)
Jacqueline
2025-02-15 20:51:53 +0000 UTCNo that's not something I do or allow as a mod!
Tracy Francis
2024-12-18 22:47:21 +0000 UTChello, was wondering if you ever made dragons/.. with embossed eyes where you can (after the print) glue plastic ones in. Love your work !
Sid
2024-12-18 20:00:45 +0000 UTCThey stay here on Patreon!
Tracy Francis
2024-09-21 22:29:01 +0000 UTCI am a member how can I get all of these linked to my mini factory?
Angela
2024-09-21 22:19:14 +0000 UTCWeird, try refreshing it?
Tracy Francis
2024-08-22 17:48:36 +0000 UTCHey Tracy, It looks like the link to download the baby cherry blossom dragon is missing.
This Printed Thing
2024-08-22 15:31:13 +0000 UTCIts in the post! :)
Tracy Francis
2024-08-21 22:21:46 +0000 UTCHi! I am a long term subscriber, but I can't seem to find the download link for the Baby Cherry Blossom anywhere. Please help.
Lilian Lee
2024-08-21 19:18:21 +0000 UTCThat is correct, exclusives live on Patreon
Tracy Francis
2024-08-21 18:01:58 +0000 UTCHello I was a patreon member during April but the baby blossom dragon doesnt show up in my my mini factory account.
Dominic Catenacci
2024-08-21 17:46:57 +0000 UTCThis has been updated
Tracy Francis
2024-08-21 17:32:00 +0000 UTCIs this one missing .3mf files? In the pictures there are two different multicolor variations, but there was only one .3mf file in the zip.
Katja Virpiranta
2024-08-17 17:24:15 +0000 UTCgood question
dak
2024-06-16 02:34:29 +0000 UTCHey there, since you are subscribed here, your exclusives live here! This and the Whatchamahoozit '24 are exclsuives!
Tracy Francis
2024-05-26 12:45:09 +0000 UTCSorry if I'm asking this in the wrong place, but this little guy doesn't show in my MyMiniFactory library... nor does the Whatchamahoozit '24 dragon. Did I miss an email or do they just not get included in the library? Thanks!
Erik White
2024-05-26 03:12:39 +0000 UTCthis model doesnt have wings ๐
Jazzy
2024-04-29 19:02:42 +0000 UTCprints great, wings are a bit on the heavy side. printed in black/purple silk and gold eyes/accents. looks great
Brandon Wieber
2024-04-27 03:51:20 +0000 UTCYou can split the model to objects and print just the tail!
Jazzy Plz
2024-04-24 19:25:36 +0000 UTCThe full size adult is on Cults yes, but the baby is not and never will be
Jazzy
2024-04-24 19:24:53 +0000 UTCWhy is this on cults3d?
Lisa K
2024-04-23 22:37:48 +0000 UTCthe tail would be beautiful in a keychain
Scott Mumma
2024-04-23 19:35:17 +0000 UTCYou can separate the model to parts and print just the tail, that's allowed!
Jazzy Plz
2024-04-18 00:32:55 +0000 UTCI would love for the tail to be able to be made in a keychain. I love the cherry blossom dragon
Cali Stevens
2024-04-17 21:30:02 +0000 UTCFound it: Hit the down arrow next to FILE in the upper right corner>Edit>Select ALL> Left click object to select>Right Click object>Assemble
Rachel Tybor
2024-04-17 14:41:00 +0000 UTCWhere is the select all option on the Bambu Slicer?
Rachel Tybor
2024-04-17 14:38:49 +0000 UTCJust select all and left click, assemble. Works for me atleast
Daniel Deans
2024-04-17 01:44:15 +0000 UTCusually the babies are 12-14 inches! not sure what this one is specfically
Jazzy Plz
2024-04-13 19:30:32 +0000 UTCJust so you are aware, the MMU imports as separate links so be careful when arranging the plate.
Aaron Plotkin
2024-04-13 14:13:05 +0000 UTCHe's very beautiful. Is it possible to know the length with a 100% print? Thanks :)
Malicely
2024-04-11 11:40:59 +0000 UTCI love it! Thank you for this cute little baby dragon. I just finished my print and it turned out perfect!
Alicia
2024-04-10 16:35:05 +0000 UTCThe whatchamahoozit is a yearly tradition we do for fun. Baby dragons are a staple and to be expected!
Jazzy Plz
2024-04-10 02:54:41 +0000 UTCI love this.. I can't wait to print it!!! I'm super excited as my favorite flower is cherry blossem... for my wedding I did cherry blossom and forget me nots... can't wait to do the pink and blue color just in time for my anniversary
Tabba
2024-04-10 02:52:58 +0000 UTCcute, but things are starting to look kind of the same, the WACHA.. was a very kool change. I know it has to be tough making 4 new models a month. So why change what is working... good question, but we need it sometimes too. Thanx
pdarling
2024-04-10 02:35:39 +0000 UTCThank you!
Antonia Hernandez (Sheena)
2024-04-10 01:33:52 +0000 UTCI'm setting mine up now, I'll let you know!
Denis
2024-04-10 00:41:26 +0000 UTCjust a headsup for anyone, the model is not connected so make sure you highlight everything and click assemble. For the 3MF MMU version
DennAgain
2024-04-10 00:28:31 +0000 UTCwhat will be the maximun to reduce on size i have a Bambu A1 MINI
Ian Sarmiento
2024-04-10 00:21:20 +0000 UTCMahalo
Jamie Sanchez
2024-04-09 23:47:37 +0000 UTCSo excited about this one
Jamie Sanchez
2024-04-09 23:47:17 +0000 UTCPerrrrfect timing!!!
Julie Fernandes
2024-04-09 23:39:59 +0000 UTCThank you! I was hoping for one for those who have told me they don't have somewhere to put the big ones.
Kristin Riess
2024-04-09 23:07:51 +0000 UTCOh thank goodness! Was hoping yall would release this this month
Gwendolyn Pomidor
2024-04-09 23:02:53 +0000 UTCSo cute! I love the babies!
Jeff Robinson
2024-04-09 21:04:55 +0000 UTCI can't wait to print this
Dragonsblood
2024-04-09 20:42:47 +0000 UTCWhat speeds you using on this model?
Deimantas Aleksandrovas
2024-04-09 20:27:53 +0000 UTCI was so hoping for a baby version of this! I've got one printing already! ^_^
Braden Noyes
2024-04-09 20:11:34 +0000 UTCI love it! The baby dragons are my favorite. Going on the printer right now. Thanks again for all these adorable designs.
Jill Woolsey
2024-04-09 19:52:55 +0000 UTCLove it! Thank you for sharing your work with all of us, absolutely beautiful! - runs off to download/slice/print
Amethyst Forest
2024-04-09 19:17:51 +0000 UTCLove it! I know what Iโm making for Motherโs Day
Ben Wilson
2024-04-09 19:04:11 +0000 UTClove this print
olivia childs
2024-04-09 18:21:16 +0000 UTCYou can assemble it in the slicer!
Jazzy Plz
2024-04-09 18:09:45 +0000 UTCwas literally just opening up my program to figure out what to print next! I raaaaan to get this on my plate. When i imported the 3mf file it seems to be all broken apart in separate pieces, not grouped together. is this a concern?
Julie Pehotsky
2024-04-09 18:08:42 +0000 UTCOmgosh yes ๐โค๏ธโค๏ธโค๏ธโค๏ธ Thank you!
Ariann Childress
2024-04-09 18:08:15 +0000 UTCOMG this is so cute.
Jeanette
2024-04-09 18:05:16 +0000 UTCBabbbyyyyyyyy <3
Julie Pehotsky
2024-04-09 18:00:57 +0000 UTCThank you so much! Iโve been having a blast with the Cherry blossom dragon!
Brandon Ryan
2024-04-09 18:00:24 +0000 UTCSTOP IT!....but please don't lol
Nightmare Stitchery
2024-04-09 17:59:53 +0000 UTCLove it! Iโm gonna need to make this a multi color!
Drea Ami
2024-04-09 17:58:15 +0000 UTCItโs so cute! I have the perfect filament in mind!
James
2024-04-09 17:57:30 +0000 UTCBEAUTIFUL!!
TransForm3d Printing
2024-04-09 17:57:22 +0000 UTCLove the colors
Robert
2024-04-09 17:57:18 +0000 UTC
