XaiJu
cinderwing3d
cinderwing3d

patreon


TINY CRYSTAL DRAGON + LONG TAIL!


This was a JULY Design and has been Archived! If you were subscribed in July you will receive an email from MyMiniFactory within the week to access the archived files from that month. If you are starting your Subscription in August, Welcome! Your exclusive models are available immediately in the Exclusive posts (link below) and the August Models will be in the August posts tab as they come out over the month! https://www.patreon.com/cinderwing3d?filters[tag]=Exclusives

If you missed this model or any others they are available on MMF for purchase! Please use the Discount code: CinderAug23

https://www.myminifactory.com/users/Cinderwing3D?show=store

------------------------------------------------------

Update: Community MOD attached below!! TINY Crystal Dragon KEYCHAIN VERSION! Community Mod made by Discord Tag: "Jerm240"

--------------------------

Hi Cinders!!

I have a fun new Tiny Model for you all! It's a TINY SPIN on the Crystal Dragon! I have revamped the 2022 Crystal Wyvern into a Tiny Crystal Dragon with more articulation! PLUS, since the original Crystal Dragon was made with a Long Tail Version, I thought it would be fun to include this model with one as well!

Files Included:

The long one is a really fun print at 100% just over 5feet 3inches! I recommend printing it at 100% as it's the strongest, but it has also been tested at 75%! I hope you all enjoy! :)

Was made with Tri-color filament! : HERE

-Tracy

------------------------------------------------------

July Models:

-------------------------------------------------------

PLEASE READ

Please see WELCOME POST for questions, all exclusive releases, and links:  https://www.patreon.com/posts/welcome-to-info-71819754

Discord is our MAIN form of communication and way to provide help! Please join our community below: Discord chat HERE: https://discord.gg/cinderwing3d

For any help requests or issues please go through this email: Email (contactcinderwing3d@gmail.com) OR through a Discord ticket!

Thank you, Cinders, for your support!!! And Thank you to our Admins (Jazzy and Turk) and Test Team for all your hard work!

TINY CRYSTAL DRAGON + LONG TAIL! TINY CRYSTAL DRAGON + LONG TAIL! TINY CRYSTAL DRAGON + LONG TAIL! TINY CRYSTAL DRAGON + LONG TAIL! TINY CRYSTAL DRAGON + LONG TAIL! TINY CRYSTAL DRAGON + LONG TAIL! TINY CRYSTAL DRAGON + LONG TAIL! TINY CRYSTAL DRAGON + LONG TAIL! TINY CRYSTAL DRAGON + LONG TAIL!

Comments

Hi, Where can I find this file now? I tried on Cults3d and Myminifactory and don't seem to see it. Any help would be appreciated. Thanks.

Norm Lai

You can add the keychain hole yourself, its an allowed mod! Most slicers can do this with the use of negative modifiers!

Tracy Francis

Hello there, Would someone be able to help me find the file to create the tiny dragon keychains with the full dragon.

Caitlin Martin

So as a new subscriber as of September you get access to the as of now unreleased September models and everything that is a Subscriber Exclusive. You can download all those under the Exclusives Tag--> https://www.patreon.com/cinderwing3d/posts?filters%5Btag%5D=Exclusives We also have these links in the pinned Welcome and Info post. Hope this helps!

Jazzy

im new here, just created patreon to subscribe to some artist. trying to understand this, even after we subscribe, we dont get access to old stuff unless we buy it aswell? i was looking for a mini dragon to print and came to this, but cant find download.

As this file has been archived it has been added to the available files on MMF/Cults

Jazzy

Update: Community MOD attached below!! TINY Crystal Dragon KEYCHAIN VERSION! Community Mod made by Discord Tag: "Jerm240" I cannot find this keychain file. Where do I find it?

Tiana Secor

I have always beefed these up because I know my Grandkids are going to give them a real work-out. I use 5 walls on smaller (baby) sized models at a 0.16 layer height and 7 walls on full size prints at 0.20 layer height. I also go with 40% infill (gyroid) because I want them to have some weight. It works for me ...

same here , I printed 4 of them , 3 failed. I tried 20% 30% 2 walls , 3 walls, all failed. It breaks in half when I take it off the bed

Misti Graas

I was just playing around with it. I printed it at 50%, 10% infill 3 walls, layer height .2 first layer .3, with outer and inner brims on my X1C. It turned out pretty cute. 75% 2 colors worked well too.

Printed two of these and my daughters LOVE them. I did 3 walls and 15% infill with adaptive cubic and they printed beautifully. Both P1P and X1C. Has anyone printed it smaller than 100% on a .04 nozzle?

Chris Tuttle

I'm printing on ender 3 s1 and bambu carbon, both are .4 nozzle with a .2 layer height. I did go to 4 wall loops and that seems to make the links a little more robust??? it maybe just the filament but they seem to hold up better?


More Creators