Bush Viper PiP
Added 2025-12-28 02:19:01 +0000 UTCClick Here to download
This has been requested a lot. This version of the bush viper requires no assembly and prints in one piece. Of course no opening mouth or having to install fangs. Also included is a version with a shorter tail to allow for smaller scaling.
PARTS:
BushViper
Bush Viper Glass Eye
Bush Viper Glass Eye Short Tail
Bush Viper Short Tail
Bush Viper 3mf All styles
Scaling
SCALING IS PRINTER DEPENDENT. Short Tail Version has been tested down to 60%, as always test print as filament, machine, tuning can influence scaling success.
Eyes:
120% - 12mm
100%- 10mm
80%- 8mm
60%%-6mm
These are safe guides. Test print the head to find what size works best for you AND the brand of glass eyes as they are not all EXACTLY the same.
Printing Parameters
3 walls
10%% crosshatch/10% gyroid
.20 layer height
Enjoy the print
Filiments
Ziro Beach
Ziro Layered Rock
Bambu Matte Grass Green, Bambu Green
Comments
No, I had not planned one as printing an open mouth one a lot smaller will lead to problems with the fangs. Might be able to get away with 80% and 8mm eyes. I will test and see.
Rob Klockman
2026-01-15 15:09:58 +0000 UTCIs there a shorter version for the one with the opening mouth as well now, or not yet?
Craft3d
2026-01-15 14:38:21 +0000 UTCThe green one is multicolor, the blue/Grey one is the filiment
Rob Klockman
2025-12-29 18:22:04 +0000 UTCHow do you get the printer to fade between two colors? Or is that a specific filament. Same effect on your picture of the cobra ☺
Tommy Stanton-Cole
2025-12-29 18:14:55 +0000 UTCthank youuuuu !!!!!
Pinka
2025-12-29 04:06:38 +0000 UTCYooooooooo!!!! Thank you!!!
PrintedAF
2025-12-28 02:20:18 +0000 UTC
