Raki-Box

Boa Constrictor Released

Added 2025-12-09 02:01:59 +0000 UTC

Find Download HERE

PLEASE SEE PRINTING INFO IN DOWNLOAD

3MF COMING SOON

A typical 256 by 256 printer can print at 205%. Use as many body 2 sections to extend. In testing two of the body 2’s made the most realistic shape of snake. There are internal stabilizers that need to be separated, so just flex the snake until you feel it release.

PARTS:

Body 1
Body 2
Body 3
Eyes
Head
Jaw
Inside Mouth 1
Inside Mouth 2

Scaling

Test printed from 70% to 205%. At 70% suggest making sure that detect thin walls is enabled, or change from classic walls to archane walls.

Eyes:

100% - 6mm

133% - 8mm

166% - 10mm

200% - 12mm

Going bigger? Divide output eye size by 6 to get approximate percentage. I.E If you want to use 18mm eyes then 18/6= 3 or 300%. These are starting points TEST PRINT!!!!

These are safe guides. Test print the head to find what size works best for you AND the brand of glass eyes as they are not all EXACTLY the same.

Printing Parameters

3 walls

10%% crosshatch/10% gyroid

.20 layer height

If downscaling then make sure to use detect thin walls or archane wall generation

Enjoy the print