Williams Industries

December 13th Drop

Added 2023-12-13 18:35:53 +0000 UTC

Okay, this will be a little bit of a longer post, so my apologies for the eye strain.

First, this week I will be announcing the full details of the giveaways we are doing this month. I also have had a few companies reach out to me wanting to partner. I am not a big fan of that type of stuff, but if I can get yall free stuff and if their products are something that I can get behind I will give it a shot.

This will be the last month that folks will start with full access, everyone here will always have it, and will have access to anything "archived".

This will be my last full drop of the month, so I wanted to make sure there were a decent number of files for yall. I think there is about 40 files in this one. This month, I will be adding a couple variations to recent drops, so I will announce those here.

A couple of potential apologies for some of these files.. I typically do not do political type files, but I was hanging out with some friends recently, and one of my friends was so outraged over NFL teams changing their names to be more politically correct. So, this birthed the caucasian coaster that I made for him just to annoy him :) The other apology is for showing Kirby in the state that he is in for both of these files ;) My wife and children said it gives them nightmares, LOL.

The as seen on TikTok sign is just something that I have been using at my shows, and it has really helped draw in customers, so I thought I would add it here for you guys to use if you vend.

Lastly, I have really appreciated all of your support and encouragement. You guys are great additions to the 3D printing community, and I have enjoyed connecting with some of you to discuss 3D printing and side hustles. I look forward to us growing even more as a Patreon group, but more importantly as fellow 3D printers learning more and doing more!

My apologies, these are saved as the proiles that I use. I had an early case at the hospital this morning and did not have time to make the switch. Stay tuned for a poll on how yall would actually like to have these files saved. Face down prints- I use 0.16 for the first layer, 0.2 for the rest, arachne walls, 4 bottom layers and for anything coaster size and down I do 100% infill. 10-15% infill for larger items. I also at times will switch to a lower first layer speed if I need to. OR if you do not mind the extended time, you can switch to a 0.2 nozzle for finer detail. Face up/layered prints I do 4-5 top layers. Gyroid infill on all non-solid prints. NO brims or supports on any of these. Remember to use good filaments, settings, and a clean bed to reduce any wisps.

Please follow & like the business page: https://www.facebook.com/WilliamsIndustries.org/

Join the FB Patreon group: https://www.facebook.com/groups/585869610371951

Link for Google Drive: https://drive.google.com/drive/folders/1ZH9GEjOBOsx4NbvE5qCOsMrWNyrDl3P6?usp=sharing